Search results for
All Products
Relevant Product Categories
Vertical downflow or horizontal sideflow - Two Scroll compressors with internal line break overload and high pressure protection - Dual stage compressor - Convertible airflow - TXV refrigerant metering system on each circuit - High and low pressure or loss of charge protection
Solid Core liquid line filter drier on each circuit - Single slab, single pass designed evaporator and condenser coils facilitate easy cleaning - Foil faced insulation encapsulated throughout entire unit - Hinged major access door with heavy duty gasketing, 1/4 turn latches and door retainers
Slide Out Indoor fan assembly for added service convenience - Base pan with drawn supply and return opening for superior water management - Forkable base rails for easy handling and lifting - Single point electrical and gas connections - Internally sloped slide out condensate pan
High performance belt drive motor with variable pitch pulleys and quick adjust belt system - Permanently lubricated evaporator, condenser and gas heat inducer motors - Condenser motors are internally protected, totally enclosed with shaft down design - 2 inch filter standard with slide out design
Two stage gas valve and direct spark ignition for efficiency and reliability - Tubular heat exchanger - Solid state furnace control with on board diagnostics - 24 volt control system with resettable circuit breakers - Colored and labeled wiring - Copper tube with aluminum fin coils
Two Blades - 17-3/4 inch Diameter - 27 Degree Pitch
Features
- Thermostat can be used with gas, electric or oil heat
- Power: 24 volt hard wired or battery
- Millivolt heating: Yes
- Programming: 7 separate days and 5,1,1
- Display: 12 inch square LCD
- Stages of heat / cool (Conventional): 2H / 2C
- Stages of heat / cool (Heat pump): 3H / 2C
- Stages of dual fuel (HP / Gas): 2 / 2 - Outdoor sensor is required (not included)
- Auto changeover: Yes
- System switches: Cool - Auto - Heat - EM Heat - Off
- Fan switch: On - Auto - Prog
Composite base pan - Powder coat paint system - Scroll compressor - Curved louvered panels - Optimized fan orifice - Rust resistant screws - Expanded service valve space
15 inch wide corner service access - Diagnostic service window with two fastener opening - External gauge port access allows easy connection of "low loss" gauge ports
Service trays to hold fasteners and caps - QR code provides technical information on deand - Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wires
Low ambient control - High pressure control - Low pressure control - Standard service valves - Permanently lubricated ECM condenser fan motors with inherent overload protection
5 minute compressor time delay - Standard liquid line filter drier - 50VA transformer
Overview
Ruud Indoor Furnace cased coils and replacement uncased coils are designed for use with Ruud outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow.
Features
- This is a multiposition coil that can be used on air conditioning systems or heat pumps
- Plenum dimensions: 19-7/8 inches front to back - 23-1/2 inches side to side - Flanges are provided for field installation
- Can be used on gas or oil furnaces
- Coils are tested at the factory with an extensive refrigerant leak check
- Constructed of aluminum fins bonded to internally grooved copper tubing
- Copper sweat refrigerant connections
- Coils feature two sets of 3/4 inch condensate drain connections for ease of connection
- Unique drain pan design maximizes application flexibility and condensate removal
- Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal set material
- Compatible with Germicidal UV Resistant Light System
- Bi-directional air flow eliminates the need to switch any internal components from horizontal left to right
Supply air 23-7/8 inch high and 35-7/8 inches wide - Return air 30-1/2 inches high and 15-1/2 inches wide - No filter rack
Horizontal or vertical applications - Powder coat painted cabinet - Factory installed indoor coil with aluminum fins mechanically bonded to copper tubing
Refrigerant connections are on the outside of the unit, through a post between removable panels - Standard thermal expansion valves
Galvanized steel drain pan - Two removable access panels on top and side of unit
Condenser coil is constructed of copper tubing with aluminum fins mechanically bonded to the copper tubes - Powder coat painted louvered steel cabinet
TX valve - Demand defrost control - Reversing valve - Service valves standard on liquid and suction lines - Refrigerant connections are on the outside of the unit
Auto reset high pressure control - Auto reset low pressure control - 75VA transformer - Start capacitor - Crankcase heater - Suction line accumulator
Overview
The Ruud RHGL Commercial air handler includes an inherently protected motor mounted inside the insulated cabinet, field piping connections made through a fixed post between two side access panels, and may be installed in horizontal or vertical applications.
Features
- This is a multiposition air handler: Vertical or horizontal
- Inherently protected motor is mounted inside the insulated cabinet to reduce motor noise
- Low profile allows for horizontal installation and allows the unit to be moved through most standard doorways
- Standard thermal expansion valves
- One inch throwaway filters are standard, but the filter racks are designed to accept either one inch or two inch filters
- Two circuit, interlaced row split coils are constructed with copper tubing and aluminum fins mechanically bonded to the tubing
- Refrigerant connections are made through a fixed post located between two side access panels on either side of the unit.
- The galvanized steel drain pan is designed to trap condensate in either vertical or horizontal installations
- Two removable panels on top and each side of the unit are easily removed for access to motors, blowers, sheaves and filters
Overview
The Ruud RAWL's unique composite base reduces sound emission, eliminates rattles, significantly reduces fasteners, eliminates corrosion and has integrated brass compressor attachment inserts. Furthermore, it has incorporated into the design, water management features, means for hand placement for unit maneuvering, screw trays and inserts for lifting off unit pad.
Features
- Galvanized steel, forkable base pan
- Scroll compressor is hermetically sealed with internal overload protection
- Painted galvanized steel cabinet
- Standard low ambient control
- Field refrigerant connections are made through a fixed panel, allowing removal of access panels after piping connections have been made
- Direct drive, permanent split capacitor ECM motor
- Standard service valves on liquid and suction lines
- External gauge port access
- High pressure control and low pressure control
- Liquid line filter drier
Overview
The Ruud RGJF Ultra Series Modulating Gas Furnace equipped with the Comfort Control 2 System is seldom "off" and seldom "on" at 100%
Features
- Comfort Control System provides over 28 on board diagnostics and fault history codes by detecting system and electrical problems. "Call for service" alert notifications is sent to the thermostat to alert the homeowner of required service
- Can be converted to LP with an LP conversion kit (not included)
- Up to 3 tons of air conditioning can be added to this furnace
- Serial Communication Enhanced: When installed with a Serial Communicating Condenser and user interface control 500 series thermostat, this unit offers 4 or 2 wire installation, auto-configuration and diagnostic messaging with full communicating capability
- Heat exchanger is constructed of all stainless steel for maximum corrosion resistance
- When used with a modulating thermostat , modulation rate is between 40% and 100% of total capacity
- When used with a two stage thermostat, the furnace operates between 40% and 65% on the first stage, then up to 100% on the second stage
- When used with a single stage thermostat, the furnace functions as a three stage furnace, operating at 40%, 65% and 100% of total capacity
- Low speed constant fan
- Top electrical connections
- Dual seven segment LED for system diagnostics
- Diagnostic history for troubleshooting
- Two speed induced draft motor
- Direct spark ignition with remote sense
- Optional indoor or outdoor combustion air
Overview
The Ruud Ultra Series UAPM- JAZ Condensing Units were designed with performance in mind. These units offer comfort, energy conservation and dependability for single, multi-family and light commercial applications.
Features
- Scroll compressor is hermetically sealed and incorporates internal overload protection
- Compressor has an internal pressure relief assembly to protect against excessive pressure differential
- All refrigerant connections are on the exterior of the unit, and located close to the ground
- The cabinet is constructed of powder painted galvanized steel. The full wraparound louvered grille protects the coil from damage
- The coil is constructed of copper tubing with aluminum fins
- The control box is located in the top corner of the cabinet for easy access
- Standard service valves are included
- Separate compressor compartment
- Drawn, painted base pan
- Automatic reset high and low pressure controls are standard
- Liquid line filter dryer is standard
Bottom 1/4 inch Male SAE Flare Charge Port Connection