Air Handlers 216

Overview

The Weatherking WH1P Air handler is designed with a sturdy steel cabinet with one inch of foil faced insulation, offering excellent thermal and sound insulation, which means you get quiet and efficient comfort. The WH1P Air Handler adjusts airflow in the home to help control humidity. Airflow can be set for specific needs so your home feels just the way you want it. The factory installed indoor aluminum cooling coil is the key component for your air handler. The coil is essential to humidity control and improved system performance. The new lanced fin design also provides maximum performance and increased efficiency. The high grade condensate drain pan keeps the unit operating smoothly and the corrosion resistant aluminum endplates keep the unit looking as good as it runs.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Supply dimensions: 10-5/16 inches front to back - 16 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 15-7/8 inches side to side
• Can be used with air conditioners
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer corrosion resistant condensate drain pan
• Expansion valve on indoor coil provides for operation with air conditioning
• Coils have sweat refrigerant connections
• Coils utilize chatleff metering device connections
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Overview

The Weatherking WH1P Air handler is designed with a sturdy steel cabinet with one inch of foil faced insulation, offering excellent thermal and sound insulation, which means you get quiet and efficient comfort. The WH1P Air Handler adjusts airflow in the home to help control humidity. Airflow can be set for specific needs so your home feels just the way you want it. The factory installed indoor aluminum cooling coil is the key component for your air handler. The coil is essential to humidity control and improved system performance. The new lanced fin design also provides maximum performance and increased efficiency. The high grade condensate drain pan keeps the unit operating smoothly and the corrosion resistant aluminum endplates keep the unit looking as good as it runs.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Supply dimensions: 10-5/16 inches front to back - 16 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 15-7/8 inches side to side
• Can be used with air conditioners
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer corrosion resistant condensate drain pan
• Expansion valve on indoor coil provides for operation with air conditioning
• Coils have sweat refrigerant connections
• Coils utilize chatleff metering device connections
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Overview

The Weatherking WH1P Air handler is designed with a sturdy steel cabinet with one inch of foil faced insulation, offering excellent thermal and sound insulation, which means you get quiet and efficient comfort. The WH1P Air Handler adjusts airflow in the home to help control humidity. Airflow can be set for specific needs so your home feels just the way you want it. The factory installed indoor aluminum cooling coil is the key component for your air handler. The coil is essential to humidity control and improved system performance. The new lanced fin design also provides maximum performance and increased efficiency. The high grade condensate drain pan keeps the unit operating smoothly and the corrosion resistant aluminum endplates keep the unit looking as good as it runs.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Supply dimensions: 10-5/16 inches front to back - 19-1/2 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 19-3/8 inches side to side
• Can be used with air conditioners
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer corrosion resistant condensate drain pan
• Expansion valve on indoor coil provides for operation with air conditioning
• Coils have sweat refrigerant connections
• Coils utilize chatleff metering device connections
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Overview

The Weatherking WH1P Air handler is designed with a sturdy steel cabinet with one inch of foil faced insulation, offering excellent thermal and sound insulation, which means you get quiet and efficient comfort. The WH1P Air Handler adjusts airflow in the home to help control humidity. Airflow can be set for specific needs so your home feels just the way you want it. The factory installed indoor aluminum cooling coil is the key component for your air handler. The coil is essential to humidity control and improved system performance. The new lanced fin design also provides maximum performance and increased efficiency. The high grade condensate drain pan keeps the unit operating smoothly and the corrosion resistant aluminum endplates keep the unit looking as good as it runs.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Supply dimensions: 10-5/16 inches front to back - 19-1/2 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 19-3/8 inches side to side
• Can be used with air conditioners
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer corrosion resistant condensate drain pan
• Expansion valve on indoor coil provides for operation with air conditioning
• Coils have sweat refrigerant connections
• Coils utilize chatleff metering device connections
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Overview

The Weatherking WH1P Air handler is designed with a sturdy steel cabinet with one inch of foil faced insulation, offering excellent thermal and sound insulation, which means you get quiet and efficient comfort. The WH1P Air Handler adjusts airflow in the home to help control humidity. Airflow can be set for specific needs so your home feels just the way you want it. The factory installed indoor aluminum cooling coil is the key component for your air handler. The coil is essential to humidity control and improved system performance. The new lanced fin design also provides maximum performance and increased efficiency. The high grade condensate drain pan keeps the unit operating smoothly and the corrosion resistant aluminum endplates keep the unit looking as good as it runs.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Supply dimensions: 10-5/16 inches front to back - 16 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 15-7/8 inches side to side
• Can be used with air conditioners
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer corrosion resistant condensate drain pan
• Expansion valve on indoor coil provides for operation with air conditioning
• Coils have sweat refrigerant connections
• Coils utilize chatleff metering device connections
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Overview

The Weatherking WH1P Air handler is designed with a sturdy steel cabinet with one inch of foil faced insulation, offering excellent thermal and sound insulation, which means you get quiet and efficient comfort. The WH1P Air Handler adjusts airflow in the home to help control humidity. Airflow can be set for specific needs so your home feels just the way you want it. The factory installed indoor aluminum cooling coil is the key component for your air handler. The coil is essential to humidity control and improved system performance. The new lanced fin design also provides maximum performance and increased efficiency. The high grade condensate drain pan keeps the unit operating smoothly and the corrosion resistant aluminum endplates keep the unit looking as good as it runs.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Supply dimensions: 10-5/16 inches front to back - 19-1/2 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 19-3/8 inches side to side
• Can be used with air conditioners
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer corrosion resistant condensate drain pan
• Expansion valve on indoor coil provides for operation with air conditioning
• Coils have sweat refrigerant connections
• Coils utilize chatleff metering device connections
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Overview

The Weatherking WH1P Air handler is designed with a sturdy steel cabinet with one inch of foil faced insulation, offering excellent thermal and sound insulation, which means you get quiet and efficient comfort. The WH1P Air Handler adjusts airflow in the home to help control humidity. Airflow can be set for specific needs so your home feels just the way you want it. The factory installed indoor aluminum cooling coil is the key component for your air handler. The coil is essential to humidity control and improved system performance. The new lanced fin design also provides maximum performance and increased efficiency. The high grade condensate drain pan keeps the unit operating smoothly and the corrosion resistant aluminum endplates keep the unit looking as good as it runs.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Supply dimensions: 10-5/16 inches front to back - 19-1/2 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 19-3/8 inches side to side
• Can be used with air conditioners
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer corrosion resistant condensate drain pan
• Expansion valve on indoor coil provides for operation with air conditioning
• Coils have sweat refrigerant connections
• Coils utilize chatleff metering device connections
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Overview

The Weatherking WH1P Air handler is designed with a sturdy steel cabinet with one inch of foil faced insulation, offering excellent thermal and sound insulation, which means you get quiet and efficient comfort. The WH1P Air Handler adjusts airflow in the home to help control humidity. Airflow can be set for specific needs so your home feels just the way you want it. The factory installed indoor aluminum cooling coil is the key component for your air handler. The coil is essential to humidity control and improved system performance. The new lanced fin design also provides maximum performance and increased efficiency. The high grade condensate drain pan keeps the unit operating smoothly and the corrosion resistant aluminum endplates keep the unit looking as good as it runs.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Supply dimensions: 10-5/16 inches front to back - 16 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 15-7/8 inches side to side
• Can be used with air conditioners
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer corrosion resistant condensate drain pan
• Expansion valve on indoor coil provides for operation with air conditioning
• Coils have sweat refrigerant connections
• Coils utilize chatleff metering device connections
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Overview

The Weatherking WH1P Air handler is designed with a sturdy steel cabinet with one inch of foil faced insulation, offering excellent thermal and sound insulation, which means you get quiet and efficient comfort. The WH1P Air Handler adjusts airflow in the home to help control humidity. Airflow can be set for specific needs so your home feels just the way you want it. The factory installed indoor aluminum cooling coil is the key component for your air handler. The coil is essential to humidity control and improved system performance. The new lanced fin design also provides maximum performance and increased efficiency. The high grade condensate drain pan keeps the unit operating smoothly and the corrosion resistant aluminum endplates keep the unit looking as good as it runs.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Supply dimensions: 10-5/16 inches front to back - 16 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 15-7/8 inches side to side
• Can be used with air conditioners
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer corrosion resistant condensate drain pan
• Expansion valve on indoor coil provides for operation with air conditioning
• Coils have sweat refrigerant connections
• Coils utilize chatleff metering device connections
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Overview

The Weatherking WH1P Air handler is designed with a sturdy steel cabinet with one inch of foil faced insulation, offering excellent thermal and sound insulation, which means you get quiet and efficient comfort. The WH1P Air Handler adjusts airflow in the home to help control humidity. Airflow can be set for specific needs so your home feels just the way you want it. The factory installed indoor aluminum cooling coil is the key component for your air handler. The coil is essential to humidity control and improved system performance. The new lanced fin design also provides maximum performance and increased efficiency. The high grade condensate drain pan keeps the unit operating smoothly and the corrosion resistant aluminum endplates keep the unit looking as good as it runs.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Supply dimensions: 10-5/16 inches front to back - 16 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 15-7/8 inches side to side
• Can be used with air conditioners
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer corrosion resistant condensate drain pan
• Expansion valve on indoor coil provides for operation with air conditioning
• Coils have sweat refrigerant connections
• Coils utilize chatleff metering device connections
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Overview

Ruud High Efficiency air handlers featuring industry standard R-410A refrigerant now also come with GE's new X-13 motor, which provides enhanced SEER performance with most Ruud outdoor units.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Supply dimensions: 18 inches front to back - 11-3/4 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 23-1/2 inches side to side - Return duct flanges are standard
• Can be used with air conditioners
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg rubber insulated wire motor mount
• Slide out blower housing with motor, blower, heaters and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to tinned copper tubing
• Molded polymer corrosion resistant condensate drain pan
• High voltage and low voltage connections are on the inside of the cabinet with provisions for connections on each side
• Front refrigerant and drain connections
• Circuit breaker is included with this unit
• Durable framed, cleanable air filter provided as standard in the unit filter rack

Overview

Ruud RH1T High Efficiency single stage air handlers feature an ECM constant torque motor which provides enhanced SEER performance with most Ruud outdoor units.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Single stage air flow
• Supply dimensions: 10-5/16 inches front to back - 19-1/2 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 19-3/8 inches side to side
• Can be used with air conditioners or heat pumps
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer corrosion resistant condensate drain pan
• Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil
• Coils have sweat refrigerant connections
• Coils utilize chatleff metering device connections
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Overview

Ruud High Efficiency air handlers featuring industry standard R-410A refrigerant now also come with GE's new X-13 motor, which provides enhanced SEER performance with most Ruud outdoor units.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Supply dimensions: 18 inches front to back - 11-3/4 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 23-1/2 inches side to side - Return duct flanges are standard
• Can be used with air conditioners
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg rubber insulated wire motor mount
• Slide out blower housing with motor, blower, heaters and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to tinned copper tubing
• Molded polymer corrosion resistant condensate drain pan
• High voltage and low voltage connections are on the inside of the cabinet with provisions for connections on each side
• Front refrigerant and drain connections
• Durable framed, cleanable air filter provided as standard in the unit filter rack

Overview

Ruud High Efficiency air handlers featuring industry standard R-410A refrigerant now also come with GE's new X-13 motor, which provides enhanced SEER performance with most Ruud outdoor units.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Supply dimensions: 18 inches front to back - 11-3/4 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 23-1/2 inches side to side - Return duct flanges are standard
• Can be used with air conditioners
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg rubber insulated wire motor mount
• Slide out blower housing with motor, blower, heaters and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to tinned copper tubing
• Molded polymer corrosion resistant condensate drain pan
• High voltage and low voltage connections are on the inside of the cabinet with provisions for connections on each side
• Front refrigerant and drain connections
• Durable framed, cleanable air filter provided as standard in the unit filter rack

Overview

The Ruud RHMV EcoNet enabled air handler is equipped with an electronic expansion valve (EEV), which can intelligently change the EEV position based on system demands. By the measurement of the suction pressure via the vapor line pressure transducer (factory installed) and the vapor line thermistor (field connected to the vapor line, but factory provided within the air handler) the EcoNet enabled air handler control calculates the suction superheat at the indoor coil. This calculation permits the air handler control to make decisions for when to open and close the EEV for the purpose of maintaining a predetermined suction superheat. The EEV is equipped with a 4 pole removable external stator, and inlet and outlet chatleff fittings for optimal serviceability. These valves also have an internal check valve to provide heat pump compatibility. When operating in heating mode, the air handler control will open the EEV completely to permit the check valve to operate and maximize reverse refrigerant flow.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Can be used with air conditioning or heat pumps
• Modulating air flow
• Supply dimensions: 10-5/16 inches front to back - 16 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 15-7/8 inches side to side
• EcoNet controls
• The most compact unit design available
• Pre-painted rugged steel cabinet
• 1 inch foil faced insulation mechanically retained in blower cabinet
• Four leg blower motor
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Top, left or right side electrical connections
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer, corrosion resistant condensate drain pan
• Coils utilize chatleff metering devices
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Supply air 18 inch front to back and 11-3/4 inches wide - Return air 19-3/4 inches front to back and 23-1/2 inches wide - No filter rack

Versatile 4 way convertible design for upflow, downflow, horizontal left and horizontal right applications - Factory installed indoor coil

Sturdy construction with 1 inch of reinforced foil faced jacket insulation for excellent thermal and sound insulation

Four leg blower motor mount - Blower housing with controls, motor and blower use a slide out design for service and maintenance convenience

TXV expansion valve - Coils are constructed of aluminum fins bonded to internally grooved copper tubing

Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils - Supply and return duct flanges provided as standard on air handler cabinet

Provisions for field electrical connections available from left side of air handler cabinet

Connection point for high voltage wiring is inside the air handler cabinet - Low voltage connection is made on the inside of the air handler cabinet

Concentric knockouts are provided for power connection to cabinet - Installer may pull desired hole size up to 2 inches for 1-1/2 inch conduit

Front refrigerant and drain connections

Overview

Ruud High Efficiency air handlers featuring industry standard R-410A refrigerant now also come with GE's new X-13 motor, which provides enhanced SEER performance with most Ruud outdoor units.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Supply dimensions: 18 inches front to back - 7-9/16 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 16-1/2 inches side to side - Return duct flanges are standard
• Can be used with air conditioners
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg rubber insulated wire motor mount
• Slide out blower housing with motor, blower, heaters and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to tinned copper tubing
• Molded polymer corrosion resistant condensate drain pan
• High voltage and low voltage connections are on the inside of the cabinet with provisions for connections on each side
• Front refrigerant and drain connections
• Circuit breaker is included with this unit
• Durable framed, cleanable air filter provided as standard in the unit filter rack

Supply air 18 inch front to back and 11-3/4 inches wide - Return air 19-3/4 inches front to back and 19-3/8 inches wide - No filter rack

Versatile 4 way convertible design for upflow, downflow, horizontal left and horizontal right applications - Factory installed indoor coil

Sturdy construction with 1 inch of reinforced foil faced jacket insulation for excellent thermal and sound insulation

Four leg blower motor mount - Blower housing with controls, motor and blower use a slide out design for service and maintenance convenience

TXV expansion valve - Coils are constructed of aluminum fins bonded to internally grooved copper tubing

Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils - Supply and return duct flanges provided as standard on air handler cabinet

Provisions for field electrical connections available from left side of air handler cabinet

Connection point for high voltage wiring is inside the air handler cabinet - Low voltage connection is made on the inside of the air handler cabinet

Concentric knockouts are provided for power connection to cabinet - Installer may pull desired hole size up to 2 inches for 1-1/2 inch conduit

Front refrigerant and drain connections

Overview

The Ruud RH1V High Efficiency Air Handler is performance measured across 13 active monitoring points that deliver sustained comfort and maximum efficiency. Reducing your monthly energy bills is easier than ever because the Ruud RH1V Air Handler features a high efficiency, variable speed blower motor that is recognized by the industry for dependable energy savings. Solid construction ensures quiet operation and provides quality assurance

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Can be used with air conditioning
• Single stage air flow
• Supply dimensions: 10-5/16 inches front to back - 16 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 15-7/8 inches side to side
• The most compact unit design available
• Pre-painted rugged steel cabinet
• 1 inch foil faced insulation mechanically retained in blower cabinet
• Four leg rubber insulated blower motor
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Top, left or right side electrical connections
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer, corrosion resistant condensate drain pan
• Coils utilize chatleff metering devices
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Overview

Ruud High Efficiency air handlers featuring industry standard R-410A refrigerant now also come with GE's new X-13 motor, which provides enhanced SEER performance with most Ruud outdoor units.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Supply dimensions: 18 inches front to back - 7-9/16 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 16-1/2 inches side to side - Return duct flanges are standard
• Can be used with air conditioners
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg rubber insulated wire motor mount
• Slide out blower housing with motor, blower, heaters and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to tinned copper tubing
• Molded polymer corrosion resistant condensate drain pan
• High voltage and low voltage connections are on the inside of the cabinet with provisions for connections on each side
• Front refrigerant and drain connections
• Durable framed, cleanable air filter provided as standard in the unit filter rack

Overview

Ruud RH1T High Efficiency single stage air handlers feature an ECM constant torque motor which provides enhanced SEER performance with most Ruud outdoor units.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Single stage air flow
• Supply dimensions: 10-5/16 inches front to back - 23 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 22-7/8 inches side to side
• Can be used with air conditioners or heat pumps
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer corrosion resistant condensate drain pan
• Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil
• Coils have sweat refrigerant connections
• Coils utilize chatleff metering device connections
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Overview

The Ruud RH1P Air Handler provides enduring comfort and energy savings. It's sturdy design, quiet operation and humidity control features enhance the air quality in your home, delivering comfort you can count on

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Supply dimensions: 10-5/16 inches front to back - 16 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 15-7/8 inches side to side
• Can be used with air conditioners or heat pumps
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer corrosion resistant condensate drain pan
• Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil
• Coils have sweat refrigerant connections
• Coils utilize chatleff metering device connections
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Overview

The Ruud RH1P Air Handler provides enduring comfort and energy savings. It's sturdy design, quiet operation and humidity control features enhance the air quality in your home, delivering comfort you can count on

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Supply dimensions: 10-5/16 inches front to back - 16 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 15-7/8 inches side to side
• Can be used with air conditioners or heat pumps
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer corrosion resistant condensate drain pan
• Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil
• Coils have sweat refrigerant connections
• Coils utilize chatleff metering device connections
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Overview

The Ruud RH1P Air Handler provides enduring comfort and energy savings. It's sturdy design, quiet operation and humidity control features enhance the air quality in your home, delivering comfort you can count on

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Supply dimensions: 10-5/16 inches front to back - 23 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 22-7/8 inches side to side
• Can be used with air conditioners or heat pumps
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer corrosion resistant condensate drain pan
• Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil
• Coils have sweat refrigerant connections
• Coils utilize chatleff metering device connections
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Overview

The Ruud RH1P Air Handler provides enduring comfort and energy savings. It's sturdy design, quiet operation and humidity control features enhance the air quality in your home, delivering comfort you can count on

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Supply dimensions: 10-5/16 inches front to back - 16 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 15-7/8 inches side to side
• Can be used with air conditioners or heat pumps
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer corrosion resistant condensate drain pan
• Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil
• Coils have sweat refrigerant connections
• Coils utilize chatleff metering device connections
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Supply air 23-7/8 inch high and 35-7/8 inches wide - Return air 30-1/2 inches high and 15-1/2 inches wide - No filter rack

Horizontal or vertical applications - Powder coat painted cabinet - Factory installed indoor coil with aluminum fins mechanically bonded to copper tubing

Refrigerant connections are on the outside of the unit, through a post between removable panels - Standard thermal expansion valves

Galvanized steel drain pan - Two removable access panels on top and side of unit

Overview

The Ruud RHGL Commercial air handler includes an inherently protected motor mounted inside the insulated cabinet, field piping connections made through a fixed post between two side access panels, and may be installed in horizontal or vertical applications.

Features

• This is a multiposition air handler: Vertical or horizontal
• Inherently protected motor is mounted inside the insulated cabinet to reduce motor noise
• Low profile allows for horizontal installation and allows the unit to be moved through most standard doorways
• Standard thermal expansion valves
• One inch throwaway filters are standard, but the filter racks are designed to accept either one inch or two inch filters
• Two circuit, interlaced row split coils are constructed with copper tubing and aluminum fins mechanically bonded to the tubing
• Refrigerant connections are made through a fixed post located between two side access panels on either side of the unit.
• The galvanized steel drain pan is designed to trap condensate in either vertical or horizontal installations
• Two removable panels on top and each side of the unit are easily removed for access to motors, blowers, sheaves and filters

Old Number UHKA-HM4821JA

Supply air 10-5/16 inch front to back and 19-1/2 inches wide - Return air 19-3/4 inches front to back and 19-1/2 inches wide - No filter rack

Versatile 4 way convertible design for upflow, downflow, horizontal left and horizontal right applications - Factory installed high efficiency indoor coil

Sturdy construction with 1 inch of reinforced foil faced jacket insulation for excellent thermal and sound insulation

Four leg blower motor mount - Blower housing with controls, motor and blower use a slide out design for service and maintenance convenience

Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil - Coils are constructed of aluminum fins bonded to internally grooved copper tubing

Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils - Supply duct flanges provided as standard on air handler cabinet

Provisions for field electrical and other connections available from either side or top of the air handler cabinet

Connection point for high voltage wiring is inside the air handler cabinet - Low voltage connection is made on the outside of the air handler cabinet

Concentric knockouts are provided for power connection to cabinet - Installer may pull desired hole size up to 2 inches for 1-1/2 inch conduit

Front refrigerant and drain connections

Supply air 10-5/16 inch front to back and 19-1/2 inches wide - Return air 19-3/4 inches front to back and 19-3/8 inches wide - No filter rack

Versatile 4 way convertible design for upflow, downflow, horizontal left and horizontal right applications - Factory installed high efficiency indoor coil

Sturdy construction with 1 inch of reinforced foil faced jacket insulation for excellent thermal and sound insulation

Four leg blower motor mount - Blower housing with controls, motor and blower use a slide out design for service and maintenance convenience

Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil - Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing

Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils - Supply duct flanges provided as standard on air handler cabinet

Provisions for field electrical and other connections available from either side or top of the air handler cabinet

Connection point for high voltage wiring is inside the air handler cabinet - Low voltage connection is made on the outside of the air handler cabinet

Concentric knockouts are provided for power connection to cabinet - Installer may pull desired hole size up to 2 inches for 1-1/2 inch conduit

Front refrigerant and drain connections

Overview

The Ruud RH2V High Efficiency Air Handler is performance measured across 13 active monitoring points that deliver sustained comfort and maximum efficiency. Reducing your monthly energy bills is easier than ever because the Ruud RH2V Air Handler features a high efficiency, variable speed blower motor that is recognized by the industry for dependable energy savings. Solid construction ensures quiet operation and provides quality assurance

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Can be used with air conditioning
• Two stage air flow
• Supply dimensions: 10-5/16 inches front to back - 23 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 22-7/8 inches side to side
• The most compact unit design available
• Pre-painted rugged steel cabinet
• 1 inch foil faced insulation mechanically retained in blower cabinet
• Four leg rubber insulated blower motor
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Top, left or right side electrical connections
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer, corrosion resistant condensate drain pan
• Coils utilize chatleff metering devices
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections