Air Handlers 216

Overview

Ruud RH2T High Efficiency two stage air handlers feature an ECM constant torque motor which provides enhanced SEER performance with most Ruud outdoor units.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Two stage air flow - Communicating controls
• Supply dimensions: 10-5/16 inches front to back - 19-1/2 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 19-3/8 inches side to side
• Can be used with air conditioners or heat pumps
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer corrosion resistant condensate drain pan
• Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil
• Coils have sweat refrigerant connections
• Coils utilize chatleff metering device connections
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Overview

Ruud RH2T High Efficiency two stage air handlers feature an ECM constant torque motor which provides enhanced SEER performance with most Ruud outdoor units.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Two stage air flow - Communicating controls
• Supply dimensions: 10-5/16 inches front to back - 23 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 22-7/8 inches side to side
• Can be used with air conditioners or heat pumps
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer corrosion resistant condensate drain pan
• Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil
• Coils have sweat refrigerant connections
• Coils utilize chatleff metering device connections
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Overview

Ruud RH2T High Efficiency two stage air handlers feature an ECM constant torque motor which provides enhanced SEER performance with most Ruud outdoor units.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Two stage air flow - Communicating controls - EEV metering device
• Supply dimensions: 10-5/16 inches front to back - 16 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 15-7/8 inches side to side
• Can be used with air conditioners or heat pumps
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer corrosion resistant condensate drain pan
• Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil
• Coils have sweat refrigerant connections
• Coils utilize chatleff metering device connections
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Overview

Ruud RH2T High Efficiency two stage air handlers feature an ECM constant torque motor which provides enhanced SEER performance with most Ruud outdoor units.

Features

• This is a multiposition communicating air handler: Upflow, downflow, horizontal right or horizontal left
• Two stage air flow - Communicating controls - EEV metering device
• Supply dimensions: 10-5/16 inches front to back - 16 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 15-7/8 inches side to side
• Can be used with air conditioners or heat pumps
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer corrosion resistant condensate drain pan
• Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil
• Coils have sweat refrigerant connections
• Coils utilize chatleff metering device connections
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Overview

Ruud RH2T High Efficiency two stage air handlers feature an ECM constant torque motor which provides enhanced SEER performance with most Ruud outdoor units.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Two stage air flow - Communicating controls - EEV metering device
• Supply dimensions: 10-5/16 inches front to back - 19-1/2 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 19-3/8 inches side to side
• Can be used with air conditioners or heat pumps
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer corrosion resistant condensate drain pan
• Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil
• Coils have sweat refrigerant connections
• Coils utilize chatleff metering device connections
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Overview

Ruud RH1T High Efficiency single stage air handlers feature an ECM constant torque motor which provides enhanced SEER performance with most Ruud outdoor units.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Single stage air flow
• Supply dimensions: 10-5/16 inches front to back - 16 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 15-7/8 inches side to side
• Can be used with air conditioners or heat pumps
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer corrosion resistant condensate drain pan
• Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil
• Coils have sweat refrigerant connections
• Coils utilize chatleff metering device connections
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Overview

Ruud RH1T High Efficiency single stage air handlers feature an ECM constant torque motor which provides enhanced SEER performance with most Ruud outdoor units.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Single stage air flow
• Supply dimensions: 10-5/16 inches front to back - 23 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 22-7/8 inches side to side
• Can be used with air conditioners or heat pumps
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer corrosion resistant condensate drain pan
• Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil
• Coils have sweat refrigerant connections
• Coils utilize chatleff metering device connections
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Overview

Ruud RH1T High Efficiency single stage air handlers feature an ECM constant torque motor which provides enhanced SEER performance with most Ruud outdoor units.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Single stage air flow
• Supply dimensions: 10-5/16 inches front to back - 19-1/2 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 19-3/8 inches side to side
• Can be used with air conditioners or heat pumps
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer corrosion resistant condensate drain pan
• Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil
• Coils have sweat refrigerant connections
• Coils utilize chatleff metering device connections
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Overview

Ruud RH1T High Efficiency single stage air handlers feature an ECM constant torque motor which provides enhanced SEER performance with most Ruud outdoor units.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Single stage air flow
• Supply dimensions: 10-5/16 inches front to back - 19-1/2 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 19-3/8 inches side to side
• Can be used with air conditioners or heat pumps
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer corrosion resistant condensate drain pan
• Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil
• Coils have sweat refrigerant connections
• Coils utilize chatleff metering device connections
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Overview

Ruud RH1T High Efficiency single stage air handlers feature an ECM constant torque motor which provides enhanced SEER performance with most Ruud outdoor units.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Single stage air flow
• Supply dimensions: 10-5/16 inches front to back - 19-1/2 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 19-3/8 inches side to side
• Can be used with air conditioners or heat pumps
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer corrosion resistant condensate drain pan
• Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil
• Coils have sweat refrigerant connections
• Coils utilize chatleff metering device connections
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Overview

Ruud RH1T High Efficiency single stage air handlers feature an ECM constant torque motor which provides enhanced SEER performance with most Ruud outdoor units.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Single stage air flow
• Supply dimensions: 10-5/16 inches front to back - 23 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 22-7/8 inches side to side
• Can be used with air conditioners or heat pumps
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer corrosion resistant condensate drain pan
• Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil
• Coils have sweat refrigerant connections
• Coils utilize chatleff metering device connections
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Overview

Ruud RH1T High Efficiency single stage air handlers feature an ECM constant torque motor which provides enhanced SEER performance with most Ruud outdoor units.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Single stage air flow
• Supply dimensions: 10-5/16 inches front to back - 19-1/2 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 19-3/8 inches side to side
• Can be used with air conditioners or heat pumps
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
• Molded polymer corrosion resistant condensate drain pan
• Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil
• Coils have sweat refrigerant connections
• Coils utilize chatleff metering device connections
• High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
• Front refrigerant and drain connections

Supply air 10-5/16 inch front to back and 23 inches wide - Return air 19-3/4 inches front to back and 22-7/8 inches wide - No filter rack - Versatile 4 way convertible design for upflow, downflow, horizontal left and horizontal right applications - Factory installed high efficiency indoor coil - Sturdy construction with 1 inch of reinforced foil faced jacket insulation for excellent thermal and sound insulation - Four leg blower motor mount - Blower housing with controls, motor and blower use a slide out design for service and maintenance convenience - Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil - Coils are constructed of aluminum fins bonded to internally grooved copper tubing - Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils - Supply duct flanges provided as standard on air handler cabinet - Provisions for field electrical and other connections available from either side or top of the air handler cabinet - Connection point for high voltage wiring is inside the air handler cabinet - Low voltage connection is made on the outside of the air handler cabinet - Concentric knockouts are provided for power connection to cabinet - Installer may pull desired hole size up to 2 inches for 1-1/2 inch conduit - Front refrigerant and drain connections

Supply air 10-5/16 inch front to back and 23 inches wide - Return air 19-3/4 inches front to back and 22-7/8 inches wide - No filter rack

Versatile 4 way convertible design for upflow, downflow, horizontal left and horizontal right applications - Factory installed high efficiency indoor coil

Sturdy construction with 1 inch of reinforced foil faced jacket insulation for excellent thermal and sound insulation

Four leg blower motor mount - Blower housing with controls, motor and blower use a slide out design for service and maintenance convenience

Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil - Coils are constructed of aluminum fins bonded to internally grooved copper tubing

Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils - Supply duct flanges provided as standard on air handler cabinet

Provisions for field electrical and other connections available from either side or top of the air handler cabinet

Connection point for high voltage wiring is inside the air handler cabinet - Low voltage connection is made on the outside of the air handler cabinet

Concentric knockouts are provided for power connection to cabinet - Installer may pull desired hole size up to 2 inches for 1-1/2 inch conduit

Front refrigerant and drain connections

Supply air 10-5/16 inch front to back and 19-1/2 inches wide - Return air 19-3/4 inches front to back and 19-3/8 inches wide - No filter rack

Versatile 4 way convertible design for upflow, downflow, horizontal left and horizontal right applications - Factory installed high efficiency indoor coil

Sturdy construction with 1 inch of reinforced foil faced jacket insulation for excellent thermal and sound insulation

Four leg blower motor mount - Blower housing with controls, motor and blower use a slide out design for service and maintenance convenience

Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil - Coils are constructed of aluminum fins bonded to internally grooved copper tubing

Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils - Supply duct flanges provided as standard on air handler cabinet

Provisions for field electrical and other connections available from either side or top of the air handler cabinet

Connection point for high voltage wiring is inside the air handler cabinet - Low voltage connection is made on the outside of the air handler cabinet

Concentric knockouts are provided for power connection to cabinet - Installer may pull desired hole size up to 2 inches for 1-1/2 inch conduit

Front refrigerant and drain connections

Supply air 10-5/16 inch front to back and 16 inches wide - Return air 19-3/4 inches front to back and 15-7/8 inches wide - No filter rack

Versatile 4 way convertible design for upflow, downflow, horizontal left and horizontal right applications - Factory installed high efficiency indoor coil

Sturdy construction with 1 inch of reinforced foil faced jacket insulation for excellent thermal and sound insulation

Four leg blower motor mount - Blower housing with controls, motor and blower use a slide out design for service and maintenance convenience

Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil - Coils are constructed of aluminum fins bonded to internally grooved copper tubing

Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils - Supply duct flanges provided as standard on air handler cabinet

Provisions for field electrical and other connections available from either side or top of the air handler cabinet

Connection point for high voltage wiring is inside the air handler cabinet - Low voltage connection is made on the outside of the air handler cabinet

Concentric knockouts are provided for power connection to cabinet - Installer may pull desired hole size up to 2 inches for 1-1/2 inch conduit

Front refrigerant and drain connections

Old Number RHKL-HM2417JA

Supply air 10-5/16 inch front to back and 16 inches wide - Return air 19-3/4 inches front to back and 15-7/8 inches wide - No filter rack

Versatile 4 way convertible design for upflow, downflow, horizontal left and horizontal right applications - Factory installed high efficiency indoor coil

Sturdy construction with 1 inch of reinforced foil faced jacket insulation for excellent thermal and sound insulation

Four leg blower motor mount - Blower housing with controls, motor and blower use a slide out design for service and maintenance convenience

Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil - Coils are constructed of aluminum fins bonded to internally grooved copper tubing

Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils - Supply duct flanges provided as standard on air handler cabinet

Provisions for field electrical and other connections available from either side or top of the air handler cabinet

Connection point for high voltage wiring is inside the air handler cabinet - Low voltage connection is made on the outside of the air handler cabinet

Concentric knockouts are provided for power connection to cabinet - Installer may pull desired hole size up to 2 inches for 1-1/2 inch conduit

Front refrigerant and drain connections

Supply air 18 inch front to back and 7-9/16 inches wide - Return air 22-1/2 inches front to back and 15-7/8 inches wide - No filter rack

Versatile 3 way convertible design for upflow, horizontal left and horizontal right applications - Factory installed high efficiency indoor coil

Sturdy construction with 1 inch of reinforced foil faced jacket insulation for excellent thermal and sound insulation

Four leg blower motor mount - Tab lock blower housing with controls, motor and blower use a slide out design for service and maintenance convenience

Interface board with dip switches conveniently located in the blower compartment allows for precise, field selectable airflow - Coils are constructed of aluminum fins bonded to internally grooved copper tubing

Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils - Supply and return duct flanges provided as standard on air handler cabinet

Provisions for field electrical and other connections available from either side of the air handler cabinet

Connection point for high and low voltage wiring is inside the air handler cabinet

Concentric knockouts are provided for power connection to cabinet - Installer may pull desired hole size up to 2 inches for 1-1/2 inch conduit

Front refrigerant and drain connections

Overview

Ruud High Achiever Series premium efficiency air handlers featuring industry standard R-410A refrigerant now also come with GE's new X-13 motor, which provides enhanced SEER performance with most Ruud outdoor units.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left - Vertical upflow / horizontal left is the factory configuration
• Supply dimensions: 10-5/16 inches front to back - 23 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 22-7/8 inches side to side
• Can be used with air conditioners or heat pumps
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg blower motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Expansion valve on indoor coil allows operation with air conditioning or heat pump using the same coil
• Coils are constructed of aluminum fins bonded to internally grooved copper tubing
• Molded polymer corrosion resistant condensate drain pan
• Provisions for field electrical connections are on both sides or the top of the cabinet
• High voltage wiring connection is inside the cabinet - Low voltage connection is on the outside of the cabinet
• Front refrigerant and drain connections

Supply air 10-5/16 inch front to back and 23 inches wide - Return air 19-1/2 inches front to back and 22-7/8 inches wide - No filter rack

Versatile 4 way convertible design for upflow, downflow, horizontal left and horizontal right applications - Factory installed high efficiency indoor coil

Sturdy cabinet construction with 1 inch of reinforced foil faced jacket insulation for excellent thermal and sound insulation

Four leg blower motor mount - Blower housing with controls, motor and blower use a slide out design for service and maintenance convenience

Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil - Coils are constructed of aluminum fins bonded to internally grooved copper tubing

Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils - Supply duct flanges provided as standard on air handler cabinet

Provisions for field electrical and other connections available from either side or top of the air handler cabinet

Connection point for high voltage wiring is inside the air handler cabinet - Low voltage connection is made on the outside of the air handler cabinet

Concentric knockouts are provided for power connection to cabinet - Installer may pull desired hole size up to 2 inches for 1-1/2 inch conduit

Front refrigerant and drain connections

Supply air 10-5/16 inch front to back and 23 inches wide - Return air 19-1/2 inches front to back and 22-7/8 inches wide - No filter rack

Versatile 4 way convertible design for upflow, downflow, horizontal left and horizontal right applications - Factory installed high efficiency indoor coil

Sturdy cabinet construction with 1 inch of reinforced foil faced jacket insulation for excellent thermal and sound insulation

Four leg blower motor mount - Blower housing with controls, motor and blower use a slide out design for service and maintenance convenience

Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil - Coils are constructed of aluminum fins bonded to internally grooved copper tubing

Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils - Supply duct flanges provided as standard on air handler cabinet

Provisions for field electrical and other connections available from either side or top of the air handler cabinet

Connection point for high voltage wiring is inside the air handler cabinet - Low voltage connection is made on the outside of the air handler cabinet

Concentric knockouts are provided for power connection to cabinet - Installer may pull desired hole size up to 2 inches for 1-1/2 inch conduit

Front refrigerant and drain connections

Supply air 10-5/16 inch front to back and 23 inches wide - Return air 19-1/2 inches front to back and 22-7/8 inches wide - No filter rack

Versatile 4 way convertible design for upflow, downflow, horizontal left and horizontal right applications - Factory installed high efficiency indoor coil

Sturdy cabinet construction with 1 inch of reinforced foil faced jacket insulation for excellent thermal and sound insulation

Four leg blower motor mount - Blower housing with controls, motor and blower use a slide out design for service and maintenance convenience

Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil - Coils are constructed of aluminum fins bonded to internally grooved copper tubing

Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils - Supply duct flanges provided as standard on air handler cabinet

Provisions for field electrical and other connections available from either side or top of the air handler cabinet

Connection point for high voltage wiring is inside the air handler cabinet - Low voltage connection is made on the outside of the air handler cabinet

Concentric knockouts are provided for power connection to cabinet - Installer may pull desired hole size up to 2 inches for 1-1/2 inch conduit

Front refrigerant and drain connections

Supply air 10-5/16 inch front to back and 19-1/2 inches wide - Return air 19-1/2 inches front to back and 19-3/8 inches wide - No filter rack

Versatile 4 way convertible design for upflow, downflow, horizontal left and horizontal right applications - Factory installed high efficiency indoor coil

Sturdy cabinet construction with 1 inch of reinforced foil faced jacket insulation for excellent thermal and sound insulation

Four leg blower motor mount - Blower housing with controls, motor and blower use a slide out design for service and maintenance convenience

Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil - Coils are constructed of aluminum fins bonded to internally grooved copper tubing

Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils - Supply duct flanges provided as standard on air handler cabinet

Provisions for field electrical and other connections available from either side or top of the air handler cabinet

Connection point for high voltage wiring is inside the air handler cabinet - Low voltage connection is made on the outside of the air handler cabinet

Concentric knockouts are provided for power connection to cabinet - Installer may pull desired hole size up to 2 inches for 1-1/2 inch conduit

Front refrigerant and drain connections

Overview

Ruud High Achiever Series premium efficiency air handlers featuring industry standard R-410A refrigerant now also come with GE's new X-13 motor, which provides enhanced SEER performance with most Ruud outdoor units.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left - Vertical upflow / horizontal left is the factory configuration
• Supply dimensions: 10-5/16 inches front to back - 23 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 22-7/8 inches side to side
• Can be used with air conditioners or heat pumps
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg blower motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Expansion valve on indoor coil allows operation with air conditioning or heat pump using the same coil
• Coils are constructed of aluminum fins bonded to internally grooved copper tubing
• Molded polymer corrosion resistant condensate drain pan
• Provisions for field electrical connections are on both sides or the top of the cabinet
• High voltage wiring connection is inside the cabinet - Low voltage connection is on the outside of the cabinet
• Front refrigerant and drain connections

Supply air 10-5/16 inch front to back and 19-1/2 inches wide - Return air 19-1/2 inches front to back and 19-3/8 inches wide - No filter rack

Versatile 4 way convertible design for upflow, downflow, horizontal left and horizontal right applications - Factory installed high efficiency indoor coil

Sturdy cabinet construction with 1 inch of reinforced foil faced jacket insulation for excellent thermal and sound insulation

Four leg blower motor mount - Blower housing with controls, motor and blower use a slide out design for service and maintenance convenience

Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil - Coils are constructed of aluminum fins bonded to internally grooved copper tubing

Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils - Supply duct flanges provided as standard on air handler cabinet

Provisions for field electrical and other connections available from either side or top of the air handler cabinet

Connection point for high voltage wiring is inside the air handler cabinet - Low voltage connection is made on the outside of the air handler cabinet

Concentric knockouts are provided for power connection to cabinet - Installer may pull desired hole size up to 2 inches for 1-1/2 inch conduit

Front refrigerant and drain connections

- Featuring Earth-friendly R-410A refrigerant.

- Features GE's new X-13 motor, which provides enhanced SEER performance with most Rheem outdoor units.

- Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications.

- Nominal airflow up to 1.0" external static pressure. Factory-installed high efficiency indoor coil.

- Sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics.

- Field-installed auxiliary electric heater kits provide exact heat for indoor comfort. Kits include circuit breakers which meet U.L. and cUL requirements for service disconnect.

Overview

Ruud High Efficiency air handlers featuring industry standard R-410A refrigerant and energy efficient GE ECM motor for quiet operation and enhanced customer satisfaction

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left - Vertical upflow / horizontal left is the factory configuration
• Supply dimensions: 10-5/16 inches front to back - 23 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-1/2 inches front to back - 22-7/8 inches side to side
• Can be used with air conditioners or heat pumps
• Interface board with dip switches conveniently located in the blower compartment allows precise, field selectable airflow
• Quiet, efficient ECM motor
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg blower motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to internally grooved copper tubing
• Molded polymer corrosion resistant condensate drain pan
• Provisions for field electrical connections are on both sides or the top of the cabinet
• High voltage wiring connection is inside the cabinet - Low voltage connection is on the outside of the cabinet
• Front refrigerant and drain connections

Overview

Ruud High Efficiency air handlers featuring industry standard R-410A refrigerant now also come with GE's new X-13 motor, which provides enhanced SEER performance with most Ruud outdoor units.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
• Supply dimensions: 18 inches front to back - 9-7/16 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 20 inches side to side - Return duct flanges are standard
• Can be used with air conditioners
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg rubber insulated wire motor mount
• Slide out blower housing with motor, blower, heaters and controls for service and maintenance convenience
• Coils are constructed of aluminum fins bonded to tinned copper tubing
• Molded polymer corrosion resistant condensate drain pan
• High voltage and low voltage connections are on the inside of the cabinet with provisions for connections on each side
• Front refrigerant and drain connections
• Circuit breaker is included with this unit
• Durable framed, cleanable air filter provided as standard in the unit filter rack

Old Number UHSL-HM3017JA

Supply air 10-5/16 inch front to back and 16 inches wide - Return air 19-3/4 inches front to back and 15-7/8 inches wide - No filter rack

Versatile 4 way convertible design for upflow, downflow, horizontal left and horizontal right applications - Factory installed high efficiency indoor coil

Sturdy construction with 1 inch of reinforced foil faced jacket insulation for excellent thermal and sound insulation

Four leg blower motor mount - Blower housing with controls, motor and blower use a slide out design for service and maintenance convenience

Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil - Coils are constructed of aluminum fins bonded to internally grooved copper tubing

Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils - Supply duct flanges provided as standard on air handler cabinet

Provisions for field electrical and other connections available from either side or top of the air handler cabinet

Connection point for high voltage wiring is inside the air handler cabinet - Low voltage connection is made on the outside of the air handler cabinet

Concentric knockouts are provided for power connection to cabinet - Installer may pull desired hole size up to 2 inches for 1-1/2 inch conduit

Front refrigerant and drain connections

Overview

The Ruud RHGL Commercial air handler includes an inherently protected motor mounted inside the insulated cabinet, field piping connections made through a fixed post between two side access panels, and may be installed in horizontal or vertical applications.

Features

• This is a multiposition air handler: Vertical or horizontal
• Inherently protected motor is mounted inside the insulated cabinet to reduce motor noise
• Low profile allows for horizontal installation and allows the unit to be moved through most standard doorways
• Standard thermal expansion valves
• One inch throwaway filters are standard, but the filter racks are designed to accept either one inch or two inch filters
• Two circuit, interlaced row split coils are constructed with copper tubing and aluminum fins mechanically bonded to the tubing
• Refrigerant connections are made through a fixed post located between two side access panels on either side of the unit.
• The galvanized steel drain pan is designed to trap condensate in either vertical or horizontal installations
• Two removable panels on top and each side of the unit are easily removed for access to motors, blowers, sheaves and filters

Old Number UBHK-24J00NHC and UBHK-24J00NHB

Supply air 10-5/16 inch front to back and 19-1/2 inches wide - Return air 19-3/4 inches front to back and 19-3/8 inches wide - No filter rack

Versatile 4 way convertible design for upflow, downflow, horizontal left and horizontal right applications - Factory installed high efficiency indoor coil

Sturdy construction with 1 inch of reinforced foil faced jacket insulation for excellent thermal and sound insulation

Four leg blower motor mount - Blower housing with controls, motor and blower use a slide out design for service and maintenance convenience

Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil - Coils are constructed of aluminum fins bonded to internally grooved copper tubing

Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils - Supply duct flanges provided as standard on air handler cabinet

Provisions for field electrical and other connections available from either side or top of the air handler cabinet

Connection point for high voltage wiring is inside the air handler cabinet - Low voltage connection is made on the outside of the air handler cabinet

Concentric knockouts are provided for power connection to cabinet - Installer may pull desired hole size up to 2 inches for 1-1/2 inch conduit

Front refrigerant and drain connections

Overview

Ruud High Achiever Series premium efficiency air handlers featuring industry standard R-410A refrigerant now also come with GE's new X-13 motor, which provides enhanced SEER performance with most Ruud outdoor units.

Features

• This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left - Vertical upflow / horizontal left is the factory configuration
• Supply dimensions: 10-5/16 inches front to back - 23 inches side to side - Supply duct flanges are standard
• Return dimensions: 19-3/4 inches front to back - 22-7/8 inches side to side
• Can be used with air conditioners or heat pumps
• The most compact unit design available
• Attractive, rugged steel wall cabinet with pre-painted exterior
• 1 inch of foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance
• Four leg blower motor mount
• Slide out blower housing with motor, blower and controls for service and maintenance convenience
• Expansion valve on indoor coil allows operation with air conditioning or heat pump using the same coil
• Coils are constructed of aluminum fins bonded to internally grooved copper tubing
• Molded polymer corrosion resistant condensate drain pan
• Provisions for field electrical connections are on both sides or the top of the cabinet
• High voltage wiring connection is inside the cabinet - Low voltage connection is on the outside of the cabinet
• Front refrigerant and drain connections