Two piece body - 600 PSIG maximum cold water operating pressure at 100 degrees - 32 degrees to 250 degrees working pressure - PTFE stem packing - Chrome plated lead free brass ball
Ball Valves 232
Red handle - Two piece body - Blow out proof stem - Adjustable packing - Virgin PTFE seats - Chrome plated ball
For use with Aquatherm PP-R tubing - Permanent leak free connections made via heat fusion - Suitable for potable water - High flow hose drain with cap and tether - Adjustable packing nut
Features
- 400# WOG
- Brass Body
- Regular Port
- Virgin PTFE Seats
- For use with PEX Tubing
- Barb x Barb
- Blow-Out Proof Stem
- Double NBR O-ring Packing
- ASTM F1960
- NSF 61-G & NSF 372 Certified
A high quality, economical quarter-turn shut-off valve designed for irrigation, pool and spa, and general purpose applications. IPS sizes 1/2 to 2 in available in PVC White, PVC Gray or CPVC with socket or threaded end connectors. Sizes 3 to 4 in available in PVC White with socket or threaded end connectors. 6 in size available in PVC White with socket end connectors and high efficiency lever style handle for easier operation.
Spears® Utility Ball Valve, 3 in Nominal, Socket, 150 psi, 140 deg F, T-Handle Actuator, PVC Ball, 8 in Inlet to Outlet Length, 5-9/16 in Top to Inlet Center, PVC Body, PVC Stem Trim, EPDM, White, Domestic
High flow hose thread drain with cap and tether - Adjustable packing glands - Not for potable water
Red handle - For Viega F1807 PEX - Not for use with steam - Two piece body - Blow out proof stem - Double NBR "O" ring packing - Virgin PTFE seats - Chrome plated ball
The Isolator is a uni-flange Ball Valve that isolates a circulator pump, allowing virtually no air into the system during pump replacement or service. Its innovative design combines multiple components into a single forged brass body that saves time, labor and space. The Isolator has revolutionized the installation of circulator pumps and has evolved into the largest flanged Ball Valve program in the industry today, featuring patented technology with further patents pending. Designed for use with water, oil, glycol mix in residential or commercial residential plumbing, commericial plumbing, heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Webstone The Isolator® Ball Valve, Heavy Duty, Series: 8141, 3/4 in Nominal, Press x Detachable HV Rotating Flanged, 250 psi, 250 deg F, Full Port, Media: Water, 3/4 in Orifice, Brass Ball, 3-11/16 in Inlet to Outlet Length, 2-1/4 in Top to Inlet Center, Brass Body, PTFE/Brass Trim, PTFE/EPDM/PVC, Import
Red handle - For Viega F1807 PEX - Two piece body - Blow out proof stem - Double NBR "O" ring packing - Virgin PTFE seats - Chrome plated ball
High flow hose thread drain with cap and tether - Adjustable packing glands - Not for potable water
Not for use with potable water - For use with water, oil, or gas - Adjustable packing gland - High flow hose drain with cap and tether
Red handle - Not for use with steam - Two piece body - Blow out proof stem - Adjustable packing - Virgin PTFE seats - Chrome plated ball
High flow hose thread drain with cap and tether - Adjustable packing glands - Not for potable water
Two piece body - 600 PSIG maximum cold water operating pressure at 100 degrees - 350 degrees maximum temperature - Multifill PTFE stem packing - Chrome plated lead free brass ball
Jomar Valve® Ball Valve, 2-Piece, 3/4 in Nominal, FNPT, 600 psi WOG, Media: Gas, 0.59 in Orifice, Chrome Plated Brass Ball, 2.63 in Inlet to Outlet Length, 1.69 in Top to Inlet Center, Brass Body, Brass Stem and PTFE Seat Trim, FKM/Buna-N Softgoods
Red handle - Not for use with steam - Two piece body - Blow out proof stem - Adjustable packing - Virgin PTFE seats - Chrome plated ball
Red handle - EzGrip push fit ends - Can be used with copper, CPVC, and PEX tubing - Not for use with steam - Two piece body - Blow out proof stem - Adjustable packing nut - Virgin PTFE seats - Chrome plated ball
Old Number 79095
For potable water - Type 316 stainless steel ball - Eco Brass stem
Lead free brass body - PTFE seats - Chrome plated ball - EPDM "O" ring - Blow out proof stem
High flow hose thread drain with cap and tether - Adjustable packing glands - Not for potable water
Red handle - Two piece body - Blow out proof stem - Adjustable packing - Virgin PTFE seats - Chrome plated ball
High flow hose thread drain with cap and tether - Adjustable packing glands
For use with water only - Adjustable packing gland
Jomar Valve® Ball Valve, 2-Piece, 1/2 in Nominal, FNPT, 600 psi WOG, Media: Gas, 0.47 in Orifice, Chrome Plated Brass Ball, 2.45 in Inlet to Outlet Length, 1.63 in Top to Inlet Center, Brass Body, Brass Stem and PTFE Seat Trim, FKM/Buna-N Softgoods
Jomar Valve® Ball Valve, 3-Way Hot, 3/4 in Nominal, Press, 600 psi WOG, Standard Port, TEA Coated Brass Ball, 5.71 in Inlet to Outlet Length, 2 in Top to Inlet Center, Brass Body, Brass Stem and PTFE Seat Trim, PTFE/FKM Softgoods, Import
Old number 150233G
Red handle - Not for use with steam - Two piece body - Blow out proof stem - Adjustable packing - Virgin PTFE seats - Chrome plated ball
Red handle - Not for use with steam - Two piece body - Blow out proof stem - Adjustable packing - Virgin PTFE seats - Chrome plated ball
Overview
This 3/4 inch lead free two-piece, full port, ball valve with integral press end fittings is designed for use in plumbing, heating, and potable water applications. It features a lead free brass body, adjustable packing gland, and bottom-loaded blowout proof stem. It is made with integral ASTM-B88 compliant press end connections that are designed for types K, L and M hard copper tubing. The press fitting is rated to 250 psi CWP up to 210 degrees F.
Features
- Lead free brass body rated NSF61-8
- Bottom loaded blowout proof stem with packing nut
- Press connection rated to 250 psi CWP up to 210 degrees F
- Press end connections comply to ASTM-B88
Not for potable water - Red handle - Two piece body - Blow out proof stem - Adjustable packing nut - Virgin PTFE seats - Chrome plated ball
For potable water - Type 316 stainless steel ball - Eco Brass stem
Red handle - For Uponor/Wirsbo F1960 PEX - Two piece body - Blow out proof stem - Double NBR "O" ring packing - Virgin PTFE seats - Chrome plated ball
For use with water, oil, or gas - Adjustable packing gland
Spears® True Union 2000 Ball Valves, 3-Way Ball Valves and Ball Check Valves provide maximum versatility with fully interchangeable valve cartridges. Provides for easier system design modifications and upgrades in multiphase projects, or anywhere changes in valve types are desired. Simply exchange any True Union 2000 valve in-line using existing union nuts. Also mates with Spears® new SCH 80/XH Unions and Diaphragm Valves. All True Union 2000 valves feature a low profile, compact design for minimal space requirements. Available in PVC or CPVC with choice of EPDM or FKM O-ring seals and socket, threaded, flanged, spigot or optional Spears® patented Special Reinforced (SR) threaded end connectors. Additionally, Spears® offers valve Retrofit Kits for easy in-line replacement of other valves and factory installed Actuation Packages. Assembled with silicone-free lubricant.
Spears® Ball Valve, Industrial, Series: True Union 2000, 2 in Nominal, Socket and FNPT, 235 psi, 140 deg F, T-Handle Actuator, PVC Ball, 7-3/4 in Inlet to Outlet Length, 4-1/2 in Top to Inlet Center, PVC Body, PVC Stem and PTFE Seat Trim, EPDM, Gray, Domestic
Red handle - For Uponor/Wirsbo F1960 PEX - Two piece body - Blow out proof stem - Double NBR "O" ring packing - Virgin PTFE seats - Chrome plated ball
For use with PureFlow PEX, FostaPEX, and ViegaPEX Barrier
200,000 BTU/hr relief - 600# WOG (non-shock) - 1/4 turn operation - Full port - Adjustable packing - Blow out proof stem - Integral hose end drain valve - Integral relief valve port - 3401AB hot valve (red handle) - 3402AB cold valve (blue handle)