Not for potable water - Red handle - Two piece body - Blow out proof stem - Adjustable packing nut - Virgin PTFE seats - Chrome plated ball
Ball Valves 232
High flow hose thread drain with cap and tether - Adjustable packing glands
Overview
This 1/2 inch lead free two-piece, full port, ball valve with integral press end fittings is designed for use in plumbing, heating, and potable water applications. It features a lead free brass body, adjustable packing gland, and bottom-loaded blowout proof stem. It is made with integral ASTM-B88 compliant press end connections that are designed for types K, L and M hard copper tubing. The press fitting is rated to 250 psi CWP up to 210 degrees F.
Features
- Press connection rated to 250 psi CWP up to 210 degrees F
- Lead free brass body rated NSF61-8
- Bottom loaded blowout proof stem with packing nut
- Press end connections comply to ASTM-B88
Not for potable water - Red handle - Two piece body - Blow out proof stem - Adjustable packing nut - Virgin PTFE seats - Chrome plated ball
Two piece body - 600 PSIG maximum cold water operating pressure at 100 degrees - 350 degrees maximum temperature - Multifill PTFE stem packing - Chrome plated lead free brass ball
Two piece body - 600 PSIG maximum cold water operating pressure at 100 degrees - 350 degrees maximum temperature - Multifill PTFE stem packing - Chrome plated lead free brass ball
Red handle - Once piece Polypropylene (PP-R80) body - Blow out proof stem - NBR "O" ring packing - Virgin PTFE seats - Chrome plated ball
For use with water, oil, or gas - Adjustable packing gland
Yellow handle - Two piece body - Blow out proof stem - Adjustable packing - Virgin PTFE seats - Chrome plated ball
Red handle - For Viega F1807 PEX - Not for use with steam - Two piece body - Blow out proof stem - Double NBR "O" ring packing - Virgin PTFE seats - Chrome plated ball
Red handle - Two piece body - Blow out proof stem - Adjustable packing - Virgin PTFE seats - Chrome plated ball
Red handle - For Viega F1807 PEX - Two piece body - Blow out proof stem - Double NBR "O" ring packing - Virgin PTFE seats - Chrome plated ball
For use with water only - Adjustable packing gland
Not for potable water - Red handle - Two piece body - Blow out proof stem - Adjustable packing nut - Virgin PTFE seats - Chrome plated ball
Red handle - For Uponor/Wirsbo F1960 PEX - Two piece body - Blow out proof stem - Double NBR "O" ring packing - Virgin PTFE seats - Chrome plated ball
Not for use with potable water - For use with water, oil, or gas - Adjustable packing gland - High flow hose drain with cap and tether
Overview
Legend has the most expansive offering of compact, durable and labor saving full port PEX ball valves. All Legend PEX ball valves feature the dual O-ring stem design that requires no packing nut removing the potential for call backs. The valves are constructed of binary brass to meet all no lead requirements. Three models are configurations based on the T-1001 model which feature dual Viton(R) O-rings, a corrosion resistant Dacromet(R) coated steel handle, and are constructed of no lead binary brass. These include the T-806NL and T-805NL. The T-2005NL, T-2006NL, T-2008NL, & T-1960NL are based on the T-2000NL Full Port Ball Valve. These PEX models features dual EPDM O-rings, zinc plated steel handle and are constructed of binary brass which are also dezincification resistant. All valves are third party certified no lead ANSI/NSF-61-G, NSF or IAPMO.
Features
- Cold Working Pressure (CWP): 400 PSI
- PEX barb ends comply with ASTM F1807
- (Model T-1960) PEX barb ends comply with ASTM F-1960
- ANSI/ASTM B1.20.1 Male iron pipe threads
- ANSI/ASTM B16.18 Sweat
Red handle - Two piece body - Blow out proof stem - Adjustable packing - Virgin PTFE seats - Chrome plated ball
Red handle - Once piece Polypropylene (PP-R80) body - Blow out proof stem - NBR "O" ring packing - Virgin PTFE seats - Chrome plated ball
Old Number 19693
For potable water - Type 316 stainless steel ball - Eco Brass stem
Jomar Valve®, 150-205G, Ball Valve, 2-Piece, 1 in Nominal, Press End Style, 250 psi WOG Pressure, Full Port, Stainless Steel Ball, 3.92 in Inlet to Outlet Length, 2.25 in Top to Inlet Center, Brass Body, PTFE Softgoods, Import
Not for potable water - Two piece body - Maximum 600 PSI cold working pressure up to 100 degrees - Blowout proof stem - EPDM "O" ring stem seals - Adjustable stem packing nut - Chrome plated brass ball - Zero to 300 degree temperature range
Two piece body - 600 PSIG maximum cold water operating pressure at 100 degrees - 450 degrees maximum temperature - Multifill PTFE stem packing - Chrome plated lead free brass ball
Red handle - For Uponor/Wirsbo F1960 PEX - Two piece body - Blow out proof stem - Double NBR "O" ring packing - Virgin PTFE seats - Chrome plated ball
Not for potable water - Red handle - Two piece body - Blow out proof stem - Adjustable packing nut - Virgin PTFE seats - Chrome plated ball
Features
- Lead-free design is suitable for all no-lead potable water installation, in full compliance of all no-lead plumbing laws
- Full-pattern body, packing and handwheel construction
- Convenient stop-and-waste configuration
- An electric-induction furnace cast process optimizes molten brass temperatures, resulting in superior components
- Equipped with a stem packing and packing nut design, which are superior to packless-bonnet steam seal designs
- Full-pattern body, packing and handwheel construction is more durable than competitors' reduced-material examples
- Available in nominal sizes 1/2" and 3/4" in FNPT, Sweat or PEX end connections
Red handle - Two piece body - Blow out proof stem - Adjustable packing - Virgin PTFE seats - Chrome plated ball
Fieldpiece, HR1XR, Ball Valve Hose, For Use With: A2L Refrigerant tanks, Specifications: 8 ft Hose Length
Red handle - Not for use with steam - Two piece body - Blow out proof stem - Adjustable packing - Virgin PTFE seats - Chrome plated ball
Overview
The 1001 Series Full Port Ball Valves are maintenance-free because the stem seals with two Viton(R) O-Rings instead of the traditional gland follower or packing gland design. No call backs are necessary to tighten a packing nut. The bottom loaded stem is blowout proof and includes a PTFE thrust washer that reduces friction and makes for easier actuation. The valve body, end adaptor and cavity ball are forged brass for lighter weight and greater durability, resulting in less torque necessary to actuate the valve and longer life for the seats. The steel handle is Dacromet(R) coated and will not corrode in aggressive environments. Every valve is manufactured to precise tolerances in a completely automated ISO certified factory and 100% pressure tested. the 1001 Series of ball valves are offered in a variety of configurations for residential, commercial and industrial applications. the T/S-1001 is constructed of UNS C37700 forged brass.
Features
- Durable forged brass body
- Bottom-loaded blowout-proof stem
- Maintenance-free dual O-ring stem seal
- Improved Dyneon* TFM PTFE seats
Jomar Valve®, 150-203G, Ball Valve, 2-Piece, 1/2 in Nominal, Press End Style, 250 psi WOG Pressure, Full Port, Stainless Steel Ball, 3.19 in Inlet to Outlet Length, 1.18 in Top to Inlet Center, Brass Body, PTFE Softgoods, Import
Jomar Valve®, 150-204G, Ball Valve, 2-Piece, 3/4 in Nominal, Press End Style, 250 psi WOG Pressure, Full Port, Stainless Steel Ball, 3.6 in Inlet to Outlet Length, 2.09 in Top to Inlet Center, Brass Body, PTFE Softgoods, Import
Red handle - Two piece body - Blow out proof stem - Adjustable packing - Virgin PTFE seats - Chrome plated ball
Not for potable water - Red handle - Two piece body - Blow out proof stem - Adjustable packing nut - Virgin PTFE seats - Chrome plated ball
Two piece body - 600 PSIG maximum cold water operating pressure at 100 degrees - 350 degrees maximum temperature - Multifill PTFE stem packing - Chrome plated lead free brass ball