Diffusers 102
The A503M series is a 3-way square aluminum air diffuser used for ceiling openings. The face construction allow for three-way air deflection. Our Smooth glide technology ensures rattle free and quiet airflow from your central air system. Smooth glide also provides for smooth opening and closing of your back dampers. Our high quality product will ensure years of continuous use.
TRUaire™ Directional Diffuser, Flush Louvered Face, Series: A503M, 6 x 6 in, Square Diffuser Shape, 9 in Width, 2-3/8 in D, 9 in Height, 3-Way Diffusion Pattern, Pristine White, Aluminum, Powder Coated, Import
Old number MV360S
Virtually air tight butterfly damper with rubber gasket - Damper handle allows smooth easy turning adjustment from below - Stepped collar for use with 4 inch, 5 inch, and 6 inch round duct - Mounting clip accomodates thicknesses up to 1-1/4 inch - Includes ceiling box
Features
- Extruded aluminum construction
- Cores flush with margin
- Two way air diffusion
- Face mount for easy installation
- For sidewall or ceiling application
- Multi-shutter aluminum damper
- Inconspicuous fingertip lever for air volume control
- Bright White finish
TRUaire's T-Bar Step Down Supply Diffusers go by many names, including cone diffusers, Lay-in diffusers, and T-Bar diffusers. The term "T-Bar" comes from the shapes of the railing that hold the ceiling tiles in a drop ceiling. The railing forms a grid of squares and T-Bar diffusers are designed to fit, or "lay-in" to those grid squares. The "cone" shape of the diffuser allows for maximum volume of airflow into the air-conditioned space. These Step Down Supply Diffusers feature a pristine white powder coat finish, extra heavy gauge steel, Seismic support tabs, and TRUaire's exclusive Super Collar to prevent any flex duct slippage or buckling under the pressure of a zip-screw gun. Options include choice of a two or three cone diffuser, choice of collar size, insulation, and either a SmoothGlide butterfly or radial damper.
TRUaire™ T-Bar Ceiling Diffuser, Lay-In, Series 2004CD, 12 in, 23-3/4 in Width, 4-3/4 in Depth, 23-3/4 in Height, Step Down Diffusion Pattern, White, Steel, Powder Coated, Import
Old number MVE
With damper - Stepped collar for use with 6 inch, 7 inch, and 8 inch round duct - Virtually air tight butterfly damper with rubber gasket - Damper handle allows smooth easy turning adjustment from below - Mounting clip accomodates thicknesses up to 1-1/4 inch - Includes ceiling box
Old number MVES
With damper - Stepped collar for use with 4 inch, 5 inch, and 6 inch round duct - Virtually air tight butterfly damper with rubber gasket - Damper handle allows smooth easy turning adjustment from below - Mounting clip accomodates thicknesses up to 1-1/4 inch - Includes ceiling box
TRUaire's T-Bar Step Down Supply Diffusers go by many names, including cone diffusers, Lay-in diffusers, and T-Bar diffusers. The term "T-Bar" comes from the shapes of the railing that hold the ceiling tiles in a drop ceiling. The railing forms a grid of squares and T-Bar diffusers are designed to fit, or "lay-in" to those grid squares. The "cone" shape of the diffuser allows for maximum volume of airflow into the air-conditioned space. These Step Down Supply Diffusers feature a pristine white powder coat finish, extra heavy gauge steel, Seismic support tabs, and TRUaire's exclusive Super Collar to prevent any flex duct slippage or buckling under the pressure of a zip-screw gun. Options include choice of a two or three cone diffuser, choice of collar size, insulation, and either a SmoothGlide butterfly or radial damper.
TRUaire™ Step Down Supply Diffuser, 4-Way, Series: 2004CD, 23-3/4 x 23-3/4 x 4-3/4 in, White, Steel, White Powder Coated
TRUaire's T-Bar Step Down Supply Diffusers go by many names, including cone diffusers, Lay-in diffusers, and T-Bar diffusers. The term "T-Bar" comes from the shapes of the railing that hold the ceiling tiles in a drop ceiling. The railing forms a grid of squares and T-Bar diffusers are designed to fit, or "lay-in" to those grid squares. The "cone" shape of the diffuser allows for maximum volume of airflow into the air-conditioned space. These Step Down Supply Diffusers feature a pristine white powder coat finish, extra heavy gauge steel, Seismic support tabs, and TRUaire's exclusive Super Collar to prevent any flex duct slippage or buckling under the pressure of a zip-screw gun. Options include choice of a two or three cone diffuser, choice of collar size, insulation, and either a SmoothGlide butterfly or radial damper.
TRUaire™ T-Bar Ceiling Diffuser, Lay-In, Series 2004CD, 8 in, 23-3/4 in Width, 4-3/4 in Depth, 23-3/4 in Height, Step Down Diffusion Pattern, White, Steel, Powder Coated, Import
Old number MV4S
Virtually air tight butterfly damper with rubber gasket - Damper handle allows smooth easy turning adjustment from below - Stepped collar for use with 4 inch, 5 inch, and 6 inch round duct - Mounting clip accomodates thicknesses up to 1-1/4 inch - Includes ceiling box
Features
- Extruded aluminum construction
- Cores flush with margin
- Two way air diffusion
- Face mount for easy installation
- For sidewall or ceiling application
- Multi-shutter aluminum damper
- Inconspicuous fingertip lever for air volume control
- Bright White finish
Features
- All steel construction
- Step down diffuser rings deflect air stream 360 degrees
- Bright White finish
Features
- Extruded aluminum construction
- Includes air scoop
- Two rows of individually adjustable blades for horizontal and vertical deflection
- Countersunk screw holes
- Satin Anodized finish
Features
- Extruded aluminum construction
- Includes air scoop
- Two rows of individually adjustable blades for horizontal and vertical deflection
- Countersunk screw holes
- Satin Anodized finish
TRUaire's T-Bar Step Down Supply Diffusers go by many names, including cone diffusers, Lay-in diffusers, and T-Bar diffusers. The term "T-Bar" comes from the shapes of the railing that hold the ceiling tiles in a drop ceiling. The railing forms a grid of squares and T-Bar diffusers are designed to fit, or "lay-in" to those grid squares. The "cone" shape of the diffuser allows for maximum volume of airflow into the air-conditioned space. These Step Down Supply Diffusers feature a pristine white powder coat finish, extra heavy gauge steel, Seismic support tabs, and TRUaire's exclusive Super Collar to prevent any flex duct slippage or buckling under the pressure of a zip-screw gun. Options include choice of a two or three cone diffuser, choice of collar size, insulation, and either a SmoothGlide butterfly or radial damper.
TRUaire™ T-Bar Ceiling Diffuser, Lay-In, Series 2004CD, 6 in, 23-3/4 in Width, 4-3/4 in Depth, 23-3/4 in Height, Step Down Diffusion Pattern, White, Steel, Powder Coated, Import
Old number MXE
No damper - Stepped collar for use with 6 inch, 7 inch, and 8 inch round duct - Mounting clip accomodates thicknesses up to 1-1/4 inch - Includes ceiling box
Features
- Extruded aluminum construction
- Cores flush with margin
- Two way corner air diffusion
- Face mount for easy installation
- For sidewall or ceiling application
- Multi-shutter aluminum damper
- Inconspicuous fingertip lever for air volume control
- Bright White finish
Features
- Extruded aluminum construction
- Cores flush with margin
- Two way air diffusion
- Face mount for easy installation
- For sidewall or ceiling application
- Multi-shutter aluminum damper
- Inconspicuous fingertip lever for air volume control
- Bright White finish
Features
- All steel construction
- Step down diffuser rings deflect air stream 360 degrees
- Bright White finish
Old number MV2
Virtually air tight butterfly damper with rubber gasket - Damper handle allows smooth easy turning adjustment from below - Stepped collar for use with 6 inch, 7 inch, and 8 inch round duct - Mounting clip accomodates thicknesses up to 1-1/4 inch - Includes ceiling box
TRUaire's Floor and Baseboard Registers and Grilles simply complete your home's heating and cooling needs. We offer basic models, deluxe register models, and over-sized models with screw holes for mobile homes. All of TRUaire's floor and baseboard registers and grilles proudly feature our exclusive SmoothGlide Technology, 100 percent powder coated for rust and corrosion resistance, and an easy-open slotted face. Options include choice of fin design and spacing, and most models offer the choice of a pristine white or brown finish to fit your home, and of course, exceed expectations.
TRUaire™ Stamped Face Floor Register, Series: 150, 2 x 10 in, 2 in Overall Depth, 50 to 175 cfm, 16 sq-in, 55 deg Deflection, 1/2 in Blade Spacing, Steel, White Powder Coated, Import
TRUaire's Floor and Baseboard Registers and Grilles simply complete your home's heating and cooling needs. We offer basic models, deluxe register models, and over-sized models with screw holes for mobile homes. All of TRUaire's floor and baseboard registers and grilles proudly feature our exclusive SmoothGlide Technology, 100 percent powder coated for rust and corrosion resistance, and an easy-open slotted face. Options include choice of fin design and spacing, and most models offer the choice of a pristine white or brown finish to fit your home, and of course, exceed expectations.
TRUaire™ Stamped Face Floor Register, Series: 150, 6 x 10 in, 2 in Overall Depth, 100 to 400 cfm, 43 sq-in, 55 deg Deflection, 1/2 in Blade Spacing, Steel, Brown Powder Coated, Import
Features
- Extruded Aaluminum construction
- Cores flush with margin
- Two way corner air diffusion
- Face mount for easy installation
- For sidewall or ceiling application
- Multi-shutter aluminum damper
- Inconspicuous fingertip lever for air volume control
- Bright White finish
Features
- Steel construction
- For ceiling or exposed duct installation
- Five step positioning of air pattern adjustment
- 360-degree pattern, horizontal to vertical pattern change
- Removable center core
- Diffuser outer shell fastens directly to duct, margins fit tight to ceiling for optimum ceiling appearance
- Optional #19 damper; duct mount only
- Bright White finish
Features
- Extruded aluminum construction
- Includes air scoop
- Two rows of individually adjustable blades for horizontal and vertical deflection
- Countersunk screw holes
- Satin Anodized finish
Features
- Aluminum construction
- Allows installation of T-Bar diffusers in a plaster ceiling
- Accepts standard T-Bar diffusers
- Bright White finish
Features
- Aluminum construction
- Allows installation of T-Bar diffusers in a plaster ceiling
- Accepts standard T-Bar diffusers
- Bright White finish
The 2004 Series is a 2 x 2 ft T-BAR 3 Cone Step Down Diffuser. The "cone" shape of the diffuser allows for a maximum volume of airflow into the air-conditioned space.
TRUaire™ Step-Down Supply Diffuser, 3-Cone, Series: 2004, 24 x 24 in, Square Diffuser Shape, 23-3/4 in Width, 4-3/4 in D, 23-3/4 in Height, 4-Way Diffusion Pattern, Pristine White, 24 ga Steel, Powder Coated, Import
TRUaire's Floor and Baseboard Registers and Grilles simply complete your home's heating and cooling needs. We offer basic models, deluxe register models, and over-sized models with screw holes for mobile homes. All of TRUaire's floor and baseboard registers and grilles proudly feature our exclusive SmoothGlide Technology, 100 percent powder coated for rust and corrosion resistance, and an easy-open slotted face. Options include choice of fin design and spacing, and most models offer the choice of a pristine white or brown finish to fit your home, and of course, exceed expectations.
TRUaire™ Stamped Face Floor Register, Series: 150, 2 x 10 in, 2 in Overall Depth, 50 to 175 cfm, 16 sq-in, 55 deg Deflection, 1/2 in Blade Spacing, Steel, Brown Powder Coated, Import
Old number MV3
Virtually air tight butterfly damper with rubber gasket - Damper handle allows smooth easy turning adjustment from below - Stepped collar for use with 6 inch, 7 inch, and 8 inch round duct - Mounting clip accomodates thicknesses up to 1-1/4 inch - Includes ceiling box
TRUaire's Floor and Baseboard Registers and Grilles simply complete your home's heating and cooling needs. We offer basic models, deluxe register models, and over-sized models with screw holes for mobile homes. All of TRUaire's floor and baseboard registers and grilles proudly feature our exclusive SmoothGlide Technology, 100 percent powder coated for rust and corrosion resistance, and an easy-open slotted face. Options include choice of fin design and spacing, and most models offer the choice of a pristine white or brown finish to fit your home, and of course, exceed expectations.
TRUaire™ Stamped Face Floor Register, Series: 150, 4 x 12 in, 2 in Overall Depth, 50 to 325 cfm, 34 sq-in, 55 deg Deflection, 1/2 in Blade Spacing, Steel, Brown Powder Coated, Import
Old number MXES
No damper - Stepped collar for use with 4 inch, 5 inch, and 6 inch round duct - Mounting clip accomodates thicknesses up to 1-1/4 inch - Includes ceiling box
Features
- Steel construction
- For ceiling or exposed duct installation
- Five step positioning of air pattern adjustment
- 360-degree pattern, horizontal to vertical pattern change
- Removable center core
- Diffuser outer shell fastens directly to duct, margins fit tight to ceiling for optimum ceiling appearance
- Optional #19 damper; duct mount only
- Bright White finish
Features
- Extruded aluminum construction
- Cores flush with margin
- Three way air diffusion
- Face mount for easy installation
- For sidewall or ceiling application
- Multi-shutter aluminum damper
- Inconspicuous fingertip lever for air volume control
- Bright White finish
Features
- Extruded aluminum construction
- Cores flush with margin
- One way air diffusion
- Face mount for easy installation
- For sidewall or ceiling application
- Multi-shutter aluminum damper
- Inconspicuous fingertip lever for air volume control
- Bright White finish
Old number MVASW
With damper - Antique design grille - Stepped collar for use with 4 inch, 5 inch, and 6 inch round duct - Virtually air tight butterfly damper with rubber gasket - Damper handle allows smooth easy turning adjustment from below - Mounting clip accomodates thicknesses up to 1-1/4 inch - Includes ceiling box