This 1 inch wye pattern strainer, has an iron body with 20 mesh screen, 100 wire mesh liner, threaded connections, stainless steel screen, threaded iron retainer cap with non-asbestos gasket and tapped blowdown connection. It is designed to protect system components from dirt, rust and other damaging debris in the piping system. It is used in steam and liquid applications. It is furnished with a machined seat that allows the screen to be self-aligning to assure a perfect fit. Maximum pressure (non shock) 400 psi (27.6 bar) at 150 degree F (66 degree C) WOG, 250 psi (17.2 bar) at 406 degree F (208 degree C) WSP.
WATTS® Wye Strainer, Series: 77S-M1, 1 in Nominal, 4-1/2 in Overall Length, FNPT, 3/4 in NPT Blow-Off, PTFE, Cast Iron Body
This cast iron wye pattern strainer, 2 inch Watts Model 77SI, is designed to protect system components from dirt, rust, and other damaging debris in the piping system. It is used in steam and liquid applications and it is furnished with a machined seat that allows the screen to be self-aligning to assure a perfect fit.
WATTS® Wye Strainer, Series: 77SI, 2 in Nominal, 7 in Overall Length, FNPT, 3/4 in NPT Blow-Off, Graphite, Cast Iron Body, Import
This lead free dielectric union is used in commercial and residential applications to prevent accelerated corrosion and deterioration in
the piping system due to galvanic and stray current. It is installed between pipes made from dissimilar metals and is used on applications
such as hot water storage tanks, water and air conditioners, processing tanks, steam, gas, and water piping. It consists of a FIP thread
to FIP thread (galvanized) connections, union nut, two tailpieces, and a Buna-N gasket that separates the tailpieces to prevent an
electric current from occurring. The maximum temperature is rated up to 180 degrees F (82 degrees C) at 250 psi
This 1 inch lead free dielectric union is used to prevent accelerated corrosion and deterioration in the piping system due to galvanic
and stray current. Used in commercial and residential installations, it is used to connect pipes made from dissimilar metals for
applications such as hot water storage tanks, water and air conditioners, processing tanks, steam, gas, and water piping. It consists
of a FIP thread to FIP thread (galvanized) connections, union nut, two tailpieces, and a Buna-N gasket that separates the tailpieces to
prevent an electric current from occurring. The maximum temperature is rated up to 180 degrees F (82 degrees C) at 250 psi
This 4 inch dielectric flange pipe fitting is designed for commercial and residential applications such as the connections of piping of
dissimilar metals on a hot water storage tank, water and air conditioners, processing tanks, steam, gas, and water piping to prevent
accelerated corrosion and deterioration in the piping system due to galvanic and stray current. It is suitable for water, air, oil, natural
gas, propane, gasoline, kerosene, mineral oil, vegetable oil, and alkaline. It consists of an iron pipe threaded flange tailpieces with a
Buna-N gasket and hardware. The maximum temperature is rated up to 180 degrees F (82 degrees C). The maximum pressure is
rated at 175 psi
This 1-1/4 inch lead free dielectric union is used in commercial and residential applications to prevent accelerated corrosion and
deterioration in the piping system due to galvanic and stray current. It is installed between pipes made from dissimilar metals and is
used on applications such as hot water storage tanks, water and air conditioners, processing tanks, steam, gas, and water piping. It
consists of a female iron pipe thread to female iron pipe thread (black) connections, union nut, two tailpieces, and a Buna-N gasket
that separates the tailpieces to prevent an electric current from occurring. The maximum temperature is rated up to 180 degrees F
(82 degrees C) at 250 psi
This 1-1/2 inch lead free dielectric union is used in commercial and residential applications to prevent accelerated corrosion
and deterioration in the piping system due to galvanic and stray current. It is installed between pipes made from dissimilar metals
and is used on applications such as hot water storage tanks, water and air conditioners, processing tanks, steam, gas, and water
piping. It consists of a female iron pipe thread to female iron pipe thread (black) connections, union nut, two tailpieces, and a
Buna-N gasket that separates the tailpieces to prevent an electric current from occurring. The maximum temperature is rated up
to 180 degrees F (82 degrees C) at 250 psi
This 1-1/4 inch dielectric union is used in commercial and residential applications to prevent accelerated corrosion and deterioration
in the piping system due to galvanic and stray current. It is installed between pipes made from dissimilar metals and is used on
applications such as hot water storage tanks, water and air conditioners, processing tanks, steam, gas, and water piping. It consists
of a female iron pipe thread to female brass pipe thread connection, union nut, two tailpieces, and a Buna-N gasket that separates
the tailpieces to prevent an electric current from occurring. The maximum temperature is rated up to 180 degrees F (82 degrees C)
at 250 psi
Welcome back.
Your orders, invoices, and account tools are ready when you are.
