Mini Split Heat Pumps Inside Units 192
Overview
AIRSTAGE Series systems eliminate the need for a traditional central system and bulky ductwork by using small tubing that pumps refrigerant directly to discreet wall mounted or concealed units inside. Even more remarkable, this same system works in reverse during the cold season, absorbing heat energy from the outside air and moving it indoors to heat your home. The result? Efficient year-round cooling and heating, zoning flexibility, and optimum comfort in any climate. A heat pump uses electricity to pump refrigerant and transfer heat energy from one space to another. In the summer, heat energy from inside is absorbed and released outdoors. In the winter, heat energy is absorbed from the outside air and released inside. Stylish, slim and elegant, these popular wall mounted units are designed for single rooms. Indoor units have a clean, aesthetic design and are small but mighty and shorter in length than competing units, helping them blend into any room. Do you have a warm or cool spot in your home? Fujitsu AIRSTAGE mini-splits can provide extra cooling or heating capacity for those hard to cool areas. Commercially, their small size makes them ideal for small offices, providing individual temperature control.
Features
- Includes a wireless remote control
- 2 ton cooling capacity - 24,000 BTU's heating capacity
- Four speed fan: 642 CFM, 471 CFM, 377 CFM and 306 CFM
- Operating range for heating: 86 degrees or less
- Operating range for cooling: 64 degrees to 90 degrees
- Auto changeover
- Weekly and 24 hour timer
- Automatic up and down louver adjustment
- Minimum heat mode (Wi-Fi adapter required and sold separately)
- Automatic restart
- Economy mode
- Energy saving program (ESP)
Overview
Fujitsu Airstage VR-II sytems offer simultaneous cooling and heating operation from one refrigerant system by using variable refrigerant flow (VRF) technology. The Airstage VR-II system has a much lower life cycle cost due to the great energy efficiency, high quality and features such as easy to design, install and maintain. The Airstage VR-II systems are always comfortable because the advanced controls react quickly to demand changes to always keep the climate comfortable. Airstage heat recovery systems offer efficient climate control by extracting heat from rooms or zones that require cooling, and transferring the heat to other rooms or zones that, at the same time, require heating. This creates maximum comfort in all areas while optimizing energy efficiency.
Features
- Wired or wireless remotes are not included
- 3/4 ton cooling capacity - 10,900 BTU's heating capacity
- Three speed fan: 359 CFM, 300 CFM and 212 CFM
- One crossflow fan
- Powerful output in a compact design
- Automatic swing louvers
- Built in deodorizing and ionizing filters for better air quality
- Very low power usage
- Compatible with 2 wire remotes only
Overview
The ductless system utilizes electricity to pump refrigerant and transfer heat from one space to another. In cooling mode during warm weather or summer months, the system efficiently moves heat from the inside space to the outdoors. Conversely, in heating mode during cold or winter months, the units utilize refrigerant, which is naturally colder that outdoor temperatures, to absorb heat from outside and transfer it to the inside space. The ductless systems electrical, refrigerant and condensate lines use a 3 inch diameter hole in an exterior wall to connect the outdoor condenser and the indoor units. The ductless system provides high efficiency comfort and can help lower energy costs.
Features
- Includes a remote control
- 3/4 ton cooling capacity - 10,000 BTU's heating capacity
- Three speed fan: 600 RPM, 520 RPM and 460 RPM
- Operating range for heating: 32 degrees to 86 degrees
- Operating range for cooling: 62 degrees to 90 degrees
- Compatible with the Bosch Connected Control Wi-Fi thermostat family (Wi-Fi thermostat not included)
Overview
Tosot heat pump systems eliminate the need for a traditional central system and bulky ductwork by using small tubing that pumps refrigerant directly to discreet wall mounted or concealed units inside. Even more remarkable, this same system works in reverse during the cold season, absorbing heat energy from the outside air and moving it indoors to heat your home. The result is efficient year-round cooling and heating, zoning flexibility, and optimum comfort in any climate. A heat pump uses electricity to pump refrigerant and transfer heat energy from one space to another. In the summer, heat energy from inside is absorbed and released outdoors. In the winter, heat energy is absorbed from the outside air and released inside. Stylish, slim and elegant, these popular wall mounted units are designed for single rooms. Tosot mini-splits can provide extra cooling or heating capacity for those hard to cool areas. Commercially, their small size makes them ideal for small offices, providing individual temperature control.
Features
- Includes a wireless remote control
- 1-1/2 ton cooling capacity - 18,000 BTU's heating capacity
- Seven speed Crossflow fan: From 324 CFM to 589 CFM
- Operating range for heating: Minus 22 degrees to 86 degrees
- Operating range for cooling: Minus 4 degrees to 122 degrees
- Auto changeover
- Timer and sleep mode
- Auto clean
- Variable speed two stage rotary compressor
- Memory / power failure recovery
Overview
Tosot heat pump systems eliminate the need for a traditional central system and bulky ductwork by using small tubing that pumps refrigerant directly to discreet wall mounted or concealed units inside. Even more remarkable, this same system works in reverse during the cold season, absorbing heat energy from the outside air and moving it indoors to heat your home. The result is efficient year-round cooling and heating, zoning flexibility, and optimum comfort in any climate. A heat pump uses electricity to pump refrigerant and transfer heat energy from one space to another. In the summer, heat energy from inside is absorbed and released outdoors. In the winter, heat energy is absorbed from the outside air and released inside. Stylish, slim and elegant, these popular wall or floor mounted units are designed for single rooms. Tosot mini-splits can provide extra cooling or heating capacity for those hard to cool areas. Commercially, their small size makes them ideal for small offices, providing individual temperature control.
Features
- Includes a wireless remote control
- 3/4 ton cooling capacity - 9,556 BTU's heating capacity
- Multi speed fan: 294 CFM maximum air flow
- Swing type louver adjustment
Overview
The ductless system utilizes electricity to pump refrigerant and transfer heat from one space to another. In cooling mode during warm weather or summer months, the system efficiently moves heat from the inside space to the outdoors. Conversely, in heating mode during cold or winter months, the units utilize refrigerant, which is naturally colder that outdoor temperatures, to absorb heat from outside and transfer it to the inside space. The ductless systems electrical, refrigerant and condensate lines use a 3 inch diameter hole in an exterior wall to connect the outdoor condenser and the indoor units. Using an infrared sensor, the Intelligent Eye feature saves energy and provides improved humidity control by lowering the speed of the compressor when nobody is in the room.The ductless system provides high efficiency comfort and can help lower energy costs.
Features
- Includes a remote control
- 3/4 ton cooling capacity - 10,000 BTU's heating capacity
- Three speed fan: 1020 RPM, 892 RPM and 828 RPM
- Operating range for heating: 32 degrees to 86 degrees
- Operating range for cooling: 60 degrees to 90 degrees
- Includes Intelligent Eye infrared sensor
- Compatible with the Bosch Connected Control Wi-Fi thermostat family (Wi-Fi thermostat not included)
Overview
Fujitsu Airstage VR-II sytems offer simultaneous cooling and heating operation from one refrigerant system by using variable refrigerant flow (VRF) technology. The Airstage VR-II system has a much lower life cycle cost due to the great energy efficiency, high quality and features such as easy to design, install and maintain. The Airstage VR-II systems are always comfortable because the advanced controls react quickly to demand changes to always keep the climate comfortable. Airstage heat recovery systems offer efficient climate control by extracting heat from rooms or zones that require cooling, and transferring the heat to other rooms or zones that, at the same time, require heating. This creates maximum comfort in all areas while optimizing energy efficiency.
Features
- Wired or wireless remotes are not included
- 1/3 ton cooling capacity - 4,400 BTU's heating capacity
- Three speed fan: 265 CFM, 235 CFM and 212 CFM
- One crossflow fan
- Powerful output in a compact design
- Automatic swing louvers
- Built in deodorizing and ionizing filters for better air quality
- Very low power usage
- Compatible with 2 wire remotes only
Overview
AIRSTAGE Series systems eliminate the need for a traditional central system and bulky ductwork by using small ductwork that connects to concealed units inside. Even more remarkable, this same system works in reverse during the cold season, absorbing heat energy from the outside air and moving it indoors to heat your home. The result? Efficient year-round cooling and heating, zoning flexibility, and optimum comfort in any climate. A heat pump uses electricity to pump refrigerant and transfer heat energy from one space to another. In the summer, heat energy from inside is absorbed and released outdoors. In the winter, heat energy is absorbed from the outside air and released inside.
Features
- 1 ton cooling capacity - 12,800 BTU's heating capacity
- Four speed fan: 382 CFM, 353 CFM, 324 CFM and 283 CFM
- Automatic changeover
- Weekly and 24 hour timer
- Modes: auto - cool - dry - fan - heat
- Auxiliary heat control logic
- Automatic restart
- Economy mode
- Built in condensate pump
Controls Features
- Inverter (variable speed fan)
- Long-life washable prefilter
- Hot start
- Self diagnosis
- Soft dry operation
- Auto operation
- Horizontal or vertical installation
- Horizontal rear or horizontal bottom return
- Auto restart
- Sleep mode
- Timer (on/off/weekly)
- Drain pump
- ESP control
- R32 leak detection sensor
Overview
Fujitsu Airstage VR-II sytems offer simultaneous cooling and heating operation from one refrigerant system by using variable refrigerant flow (VRF) technology. The Airstage VR-II system has a much lower life cycle cost due to the great energy efficiency, high quality and features such as easy to design, install and maintain. The Airstage VR-II systems are always comfortable because the advanced controls react quickly to demand changes to always keep the climate comfortable. Airstage heat recovery systems offer efficient climate control by extracting heat from rooms or zones that require cooling, and transferring the heat to other rooms or zones that, at the same time, require heating. This creates maximum comfort in all areas while optimizing energy efficiency. The Airstage VR-II compact cassette indoor unit fits in place of a standard 24 inch square ceiling tile. The compact cassette unit features a two stage turbo fan design with dual airflow for even air distribution across the heat exchanger. The optimized fan blade design allows for low noise and high perfomance.
Features
- Required grille is not included, but is sold separately; UTG-CCGVG (White)
- Infrared receiver is standard for communicationg with optional wireless remote control (Remote sold separately)
- Compatible with two wire remotes only
- 1-1/2 ton cooling capacity - 20,000 BTU's heating capacity
- Three speed fan: 418 CFM, 348 CFM and 259 CFM
- Two stage turbo fan
- Optimized fan blade design for low noise and high performance
- Built in condensate drain pump with transparent parts
- Support for fresh air intake (Fresh air intake not included)
- Auxiliary heat operation capability (Auxiliary heat not included)
Overview
Tosot heat pump systems eliminate the need for a traditional central system and bulky ductwork by using small tubing that pumps refrigerant directly to discreet wall mounted or concealed units inside. Even more remarkable, this same system works in reverse during the cold season, absorbing heat energy from the outside air and moving it indoors to heat your home. The result is efficient year-round cooling and heating, zoning flexibility, and optimum comfort in any climate. A heat pump uses electricity to pump refrigerant and transfer heat energy from one space to another. In the summer, heat energy from inside is absorbed and released outdoors. In the winter, heat energy is absorbed from the outside air and released inside. Stylish, slim and elegant, these popular wall or floor mounted units are designed for single rooms. Tosot mini-splits can provide extra cooling or heating capacity for those hard to cool areas. Commercially, their small size makes them ideal for small offices, providing individual temperature control.
Features
- Includes a wireless remote control
- 1-1/2 ton cooling capacity - 19,795 BTU's heating capacity
- Multi speed fan: 383 CFM maximum air flow
- Swing type louver adjustment
Overview
Fujitsu Airstage VR-II sytems offer simultaneous cooling and heating operation from one refrigerant system by using variable refrigerant flow (VRF) technology. The Airstage VR-II system has a much lower life cycle cost due to the great energy efficiency, high quality and features such as easy to design, install and maintain. The Airstage VR-II systems are always comfortable because the advanced controls react quickly to demand changes to always keep the climate comfortable. Airstage heat recovery systems offer efficient climate control by extracting heat from rooms or zones that require cooling, and transferring the heat to other rooms or zones that, at the same time, require heating. This creates maximum comfort in all areas while optimizing energy efficiency.
Features
- Wired or wireless remotes are not included
- 1 ton cooling capacity - 13,500 BTU's heating capacity
- Three speed fan: 406 CFM, 330 CFM and 277 CFM
- One crossflow fan
- Powerful output in a compact design
- Automatic swing louvers
- Built in deodorizing and ionizing filters for better air quality
- Very low power usage
- Compatible with 2 wire remotes only
Overview
Fujitsu Airstage VR-II sytems offer simultaneous cooling and heating operation from one refrigerant system by using variable refrigerant flow (VRF) technology. The Airstage VR-II system has a much lower life cycle cost due to the great energy efficiency, high quality and features such as easy to design, install and maintain. The Airstage VR-II systems are always comfortable because the advanced controls react quickly to demand changes to always keep the climate comfortable. Airstage heat recovery systems offer efficient climate control by extracting heat from rooms or zones that require cooling, and transferring the heat to other rooms or zones that, at the same time, require heating. This creates maximum comfort in all areas while optimizing energy efficiency.
Features
- Wired or wireless remotes are not included
- 1-1/2 ton cooling capacity - 20,000 BTU's heating capacity
- Three speed fan: 494 CFM, 453 CFM and 406 CFM
- One crossflow fan
- Powerful output in a compact design
- Automatic swing louvers
- Built in deodorizing and ionizing filters for better air quality
- Very low power usage
- Compatible with 2 wire remotes only
Overview
The ducted indoor unit requires very little duct work. The ducted indoor unit utilizes electricity to pump refrigerant and transfer heat from one space to another. In cooling mode during warm weather or summer months, the system efficiently moves heat from the inside space to the outdoors. Conversely, in heating mode during cold or winter months, the units utilize refrigerant, which is naturally colder that outdoor temperatures, to absorb heat from outside and transfer it to the inside space. The ducted indoor unit systems electrical, refrigerant and condensate lines use a 3 inch diameter hole in an exterior wall to connect the outdoor condenser and the indoor units. The ducted indoor unit system provides high efficiency comfort and can help lower energy costs.
Features
- 1 ton cooling capacity - 12,000 BTU's heating capacity
- Three speed fan: 1,170 RPM, 1,030 RPM and 850 RPM
- Operating range for heating: -13 degrees to 86 degrees
- Operating range for cooling: -13 degrees to 90 degrees
- Compatible with the Bosch Connected Control Wi-Fi thermostat family (Wi-Fi thermostat not included)
Overview
AIRSTAGE Series systems eliminate the need for a traditional central system and bulky ductwork by using small tubing that pumps refrigerant directly to discreet wall mounted or concealed units inside. Even more remarkable, this same system works in reverse during the cold season, absorbing heat energy from the outside air and moving it indoors to heat your home. The result? Efficient year-round cooling and heating, zoning flexibility, and optimum comfort in any climate. A heat pump uses electricity to pump refrigerant and transfer heat energy from one space to another. In the summer, heat energy from inside is absorbed and released outdoors. In the winter, heat energy is absorbed from the outside air and released inside. Stylish, slim and elegant, these popular ceiling mounted units are designed for single rooms. Indoor units have a clean, aesthetic design and are small but mighty and shorter in length than competing units, helping them blend into any room. Do you have a warm or cool spot in your home? Fujitsu AIRSTAGE mini-splits can provide extra cooling or heating capacity for those hard to cool areas. Commercially, their small size makes them ideal for small offices, providing individual temperature control.
Features
- Grill is not included, but is sold separately - UTG-CCGFGA (White)
- 1-1/2 ton cooling capacity - 19,200 BTU's heating capacity
- Four speed fan: 436 CFM, 341 CFM, 288 CFM and 241 CFM
- Automatic airflow adjustment
- Modes: Auto - cool - dry - fan - heat
- 24 hour timer
- Powerful mode
- Automatic changeover
- Cold prevention
- Fresh air knockout
Overview
AIRSTAGE Series systems eliminate the need for a traditional central system and bulky ductwork by using small tubing that pumps refrigerant directly to discreet wall mounted or concealed units inside. Even more remarkable, this same system works in reverse during the cold season, absorbing heat energy from the outside air and moving it indoors to heat your home. The result? Efficient year-round cooling and heating, zoning flexibility, and optimum comfort in any climate. A heat pump uses electricity to pump refrigerant and transfer heat energy from one space to another. In the summer, heat energy from inside is absorbed and released outdoors. In the winter, heat energy is absorbed from the outside air and released inside. Stylish, slim and elegant, these popular ceiling mounted units are designed for single rooms. Indoor units have a clean, aesthetic design and are small but mighty and shorter in length than competing units, helping them blend into any room. Do you have a warm or cool spot in your home? Fujitsu AIRSTAGE mini-splits can provide extra cooling or heating capacity for those hard to cool areas. Commercially, their small size makes them ideal for small offices, providing individual temperature control.
Features
- Grill is not included, but is sold separately - UTG-CCGFGA (White)
- 1/2 ton cooling capacity - 7,500 BTU's heating capacity
- Four speed fan: 318 CFM, 288 CFM, 259 CFM and 230 CFM
- Automatic airflow adjustment
- Modes: Auto - cool - dry - fan - heat
- 24 hour timer
- Powerful mode
- Automatic changeover
- Cold prevention
- Fresh air knockout
Overview
The ductless system utilizes electricity to pump refrigerant and transfer heat from one space to another. In cooling mode during warm weather or summer months, the system efficiently moves heat from the inside space to the outdoors. Conversely, in heating mode during cold or winter months, the units utilize refrigerant, which is naturally colder that outdoor temperatures, to absorb heat from outside and transfer it to the inside space. The ductless systems electrical, refrigerant and condensate lines use a 3 inch diameter hole in an exterior wall to connect the outdoor condenser and the indoor units. The ductless system provides high efficiency comfort and can help lower energy costs.
Features
- Includes a remote control
- 2 ton cooling capacity - 25,000 BTU's heating capacity
- Three speed fan: 680 RPM, 568 RPM and 512 RPM
- Operating range for heating: 32 degrees to 86 degrees
- Operating range for cooling: 62 degrees to 90 degrees
- Compatible with the Bosch Connected Control Wi-Fi thermostat family (Wi-Fi thermostat not included)
