Mini Split Heat Pumps Inside Units 192
Controls Features
- Left / right and up / down auto swing
- 24-Hour on/off timer
- Auto operation
- Auto restart
- Group control
- Inverter (variable speed fan)
- Jet cool / Jet heat
- 3M Micro Dust Filter
- Self-cleaning indoor coil
- Sleep mode
- R32 leak detection sensor
- Built-in Wi-Fi via Smart ThinQ app
- Compatible with applicable Single Zone Outdoor Units (see single zone literature for matching system details)
Overview
The ductless system utilizes electricity to pump refrigerant and transfer heat from one space to another. In cooling mode during warm weather or summer months, the system efficiently moves heat from the inside space to the outdoors. Conversely, in heating mode during cold or winter months, the units utilize refrigerant, which is naturally colder that outdoor temperatures, to absorb heat from outside and transfer it to the inside space. The ductless systems electrical, refrigerant and condensate lines use a 3 inch diameter hole in an exterior wall to connect the outdoor condenser and the indoor units. Using an infrared sensor, the Intelligent Eye feature saves energy and provides improved humidity control by lowering the speed of the compressor when nobody is in the room.The ductless system provides high efficiency comfort and can help lower energy costs.
Features
- Includes a remote control
- 3 ton cooling capacity - 36,000 BTU's heating capacity
- Three speed fan: 1050 RPM, 882 RPM and 798 RPM
- Operating range for heating: 32 degrees to 86 degrees
- Operating range for cooling: 60 degrees to 90 degrees
- Includes Intelligent Eye infrared sensor
- Compatible with the Bosch Connected Control Wi-Fi thermostat family (Wi-Fi thermostat not included)
Overview
Tosot heat pump systems eliminate the need for a traditional central system and bulky ductwork by using small tubing that pumps refrigerant directly to discreet wall mounted or concealed units inside. Even more remarkable, this same system works in reverse during the cold season, absorbing heat energy from the outside air and moving it indoors to heat your home. The result is efficient year-round cooling and heating, zoning flexibility, and optimum comfort in any climate. A heat pump uses electricity to pump refrigerant and transfer heat energy from one space to another. In the summer, heat energy from inside is absorbed and released outdoors. In the winter, heat energy is absorbed from the outside air and released inside. Stylish, slim and elegant, these popular wall or floor mounted units are designed for single rooms. Tosot mini-splits can provide extra cooling or heating capacity for those hard to cool areas. Commercially, their small size makes them ideal for small offices, providing individual temperature control.
Features
- Includes a wireless remote control
- 1 ton cooling capacity - 12,969 BTU's heating capacity
- Multi speed fan: 353 CFM maximum air flow
- Swing type louver adjustment
Overview
The 4-Way Ceiling Cassette indoor units, available in standard heat pump and LGRED-degree options in 2 x 2 and 3 x 3 sizes, provide duct-free installation and a sleek design. They ensure even air distribution and are equipped with four-way-controlled louvers and adjustable fan speeds, making them ideal for large, open spaces. Each unit has a wireless remote for convenient control, and an option to upgrade to a wired, wall-mounted controller is available.
Features
- All models are ENERGY STAR(R) and ENERGY STAR Cold Climate certified, which can help customers potentially qualify for rebates and incentives.
- Wide operation range with heating down to -13 - degree F (LGRED-degree models) and cooling up to 118 - degree F ensures comfort throughout the year, even in extreme weather conditions.
- Powerful heating performance provides maximum heating capacity up to 100% of rated capacity at 5 degree F for LGRED-degree models.
- Factory-installed refrigerant leak detection sensor for release mitigation.
Overview
The ducted indoor unit requires very little duct work. The ducted indoor unit utilizes electricity to pump refrigerant and transfer heat from one space to another. In cooling mode during warm weather or summer months, the system efficiently moves heat from the inside space to the outdoors. Conversely, in heating mode during cold or winter months, the units utilize refrigerant, which is naturally colder that outdoor temperatures, to absorb heat from outside and transfer it to the inside space. The ducted indoor unit systems electrical, refrigerant and condensate lines use a 3 inch diameter hole in an exterior wall to connect the outdoor condenser and the indoor units. The ducted indoor unit system provides high efficiency comfort and can help lower energy costs.
Features
- 2 ton cooling capacity - 24,400 BTU's heating capacity
- Three speed fan: 880 RPM, 820 RPM and 690 RPM
- Operating range for heating: 32 degrees to 86 degrees
- Operating range for cooling: 62 degrees to 90 degrees
- Compatible with the Bosch Connected Control Wi-Fi thermostat family (Wi-Fi thermostat not included)
Controls Features
- Left / right and up / down auto swing
- 24-Hour on/off timer
- Auto operation
- Auto restart
- Group control
- Inverter (variable speed fan)
- Jet cool / Jet heat
- 3M Micro Dust Filter
- Self-cleaning indoor coil
- Sleep mode
- R32 leak detection sensor
- Built-in Wi-Fi via Smart ThinQ app
- Compatible with applicable Single Zone Outdoor Units (see single zone literature for matching system details)
Controls Features
- Left / right and up / down auto swing
- 24-Hour on/off timer
- Auto operation
- Auto restart
- Group control
- Inverter (variable speed fan)
- Jet cool / Jet heat
- 3M Micro Dust Filter
- Self-cleaning indoor coil
- Sleep mode
- R32 leak detection sensor
- Built-in Wi-Fi via Smart ThinQ app
- Compatible with applicable Single Zone Outdoor Units (see single zone literature for matching system details)
Overview
Fujitsu Airstage VR-II sytems offer simultaneous cooling and heating operation from one refrigerant system by using variable refrigerant flow (VRF) technology. The Airstage VR-II system has a much lower life cycle cost due to the great energy efficiency, high quality and features such as easy to design, install and maintain. The Airstage VR-II systems are always comfortable because the advanced controls react quickly to demand changes to always keep the climate comfortable. Airstage heat recovery systems offer efficient climate control by extracting heat from rooms or zones that require cooling, and transferring the heat to other rooms or zones that, at the same time, require heating. This creates maximum comfort in all areas while optimizing energy efficiency. The Airstage VR-II compact cassette indoor unit fits in place of a standard 24 inch square ceiling tile. The compact cassette unit features a two stage turbo fan design with dual airflow for even air distribution across the heat exchanger. The optimized fan blade design allows for low noise and high perfomance.
Features
- Required grille is not included, but is sold separately; UTG-CCGVG (White)
- Infrared receiver is standard for communicationg with optional wireless remote control (Remote sold separately)
- Compatible with two wire remotes only
- 1/2 ton (Up to 7,500 BTU's) cooling capacity - 9,500 BTU's heating capacity
- Three speed fan: 318 CFM, 271 CFM and 230 CFM
- Two stage turbo fan
- Optimized fan blade design for low noise and high performance
- Built in condensate drain pump with transparent parts
- Support for fresh air intake (Fresh air intake not included)
- Auxiliary heat operation capability (Auxiliary heat not included)
Overview
Fujitsu Airstage VR-II sytems offer simultaneous cooling and heating operation from one refrigerant system by using variable refrigerant flow (VRF) technology. The Airstage VR-II system has a much lower life cycle cost due to the great energy efficiency, high quality and features such as easy to design, install and maintain. The Airstage VR-II systems are always comfortable because the advanced controls react quickly to demand changes to always keep the climate comfortable. Airstage heat recovery systems offer efficient climate control by extracting heat from rooms or zones that require cooling, and transferring the heat to other rooms or zones that, at the same time, require heating. This creates maximum comfort in all areas while optimizing energy efficiency.
Features
- Wired remote is not included
- 3/4 ton cooling capacity - 10,900 BTU's heating capacity
- Three speed fan: 294 CFM, 235 CFM and 194 CFM
- Two crossflow fans
- Quiet and powerful airflow
- Louver automatic swing in two directions
- Automatic closing louvers
- Very low power usage
- Compatible with 2 wire remotes only
Overview
Fujitsu Airstage VR-II sytems offer simultaneous cooling and heating operation from one refrigerant system by using variable refrigerant flow (VRF) technology. The Airstage VR-II system has a much lower life cycle cost due to the great energy efficiency, high quality and features such as easy to design, install and maintain. The Airstage VR-II systems are always comfortable because the advanced controls react quickly to demand changes to always keep the climate comfortable. Airstage heat recovery systems offer efficient climate control by extracting heat from rooms or zones that require cooling, and transferring the heat to other rooms or zones that, at the same time, require heating. This creates maximum comfort in all areas while optimizing energy efficiency.
Features
- Wired remote is not included
- 1/4 ton cooling capacity - 4,400 BTU's heating capacity
- Three speed fan: 224 CFM, 188 CFM and 165 CFM
- Two crossflow fans
- Quiet and powerful airflow
- Louver automatic swing in two directions
- Automatic closing louvers
- Very low power usage
- Compatible with 2 wire remotes only
Overview
AIRSTAGE Series systems eliminate the need for a traditional central system and bulky ductwork by using small ductwork that connects to concealed units inside. Even more remarkable, this same system works in reverse during the cold season, absorbing heat energy from the outside air and moving it indoors to heat your home. The result? Efficient year-round cooling and heating, zoning flexibility, and optimum comfort in any climate. A heat pump uses electricity to pump refrigerant and transfer heat energy from one space to another. In the summer, heat energy from inside is absorbed and released outdoors. In the winter, heat energy is absorbed from the outside air and released inside.
Features
- 1/2 ton cooling capacity - 7,500 BTU's heating capacity
- Four speed fan: 324 CFM, 288 CFM, 277 CFM and 259 CFM
- Automatic changeover
- Weekly and 24 hour timer
- Modes: auto - cool - dry - fan - heat
- Auxiliary heat control logic
- Automatic restart
- Economy mode
- Built in condensate pump
Overview
AIRSTAGE Series systems eliminate the need for a traditional central system and bulky ductwork by using small tubing that pumps refrigerant directly to discreet wall mounted or concealed units inside. Even more remarkable, this same system works in reverse during the cold season, absorbing heat energy from the outside air and moving it indoors to heat your home. The result? Efficient year-round cooling and heating, zoning flexibility, and optimum comfort in any climate. A heat pump uses electricity to pump refrigerant and transfer heat energy from one space to another. In the summer, heat energy from inside is absorbed and released outdoors. In the winter, heat energy is absorbed from the outside air and released inside. Stylish, slim and elegant, these popular ceiling mounted units are designed for single rooms. Indoor units have a clean, aesthetic design and are small but mighty and shorter in length than competing units, helping them blend into any room. Do you have a warm or cool spot in your home? Fujitsu AIRSTAGE mini-splits can provide extra cooling or heating capacity for those hard to cool areas. Commercially, their small size makes them ideal for small offices, providing individual temperature control.
Features
- 1-1/2 ton cooling capacity - 21,600 BTU's heating capacity
- Four speed fan: 494 CFM, 465 CFM, 418 CFM and 383 CFM
- Operating range for heating: 60 degrees to 86 degrees
- Operating range for cooling: 64 degrees to 90 degrees
- Automatic changeover
- 24 hour timer
- Automatic restart
- Automatic defrost
- Economy mode
- Minimum heat mode
Overview
The ducted indoor unit requires very little duct work. The ducted indoor unit utilizes electricity to pump refrigerant and transfer heat from one space to another. In cooling mode during warm weather or summer months, the system efficiently moves heat from the inside space to the outdoors. Conversely, in heating mode during cold or winter months, the units utilize refrigerant, which is naturally colder that outdoor temperatures, to absorb heat from outside and transfer it to the inside space. The ducted indoor unit systems electrical, refrigerant and condensate lines use a 3 inch diameter hole in an exterior wall to connect the outdoor condenser and the indoor units. The ducted indoor unit system provides high efficiency comfort and can help lower energy costs.
Features
- 3/4 ton cooling capacity - 10,000 BTU's heating capacity
- Three speed fan: 352.94 CFM, 282.35 CFM and 176.47 CFM
- Operating range for heating: -13 degrees to 86 degrees
- Operating range for cooling: -13 degrees to 122 degrees
- Compatible with the Bosch Connected Control Wi-Fi thermostat family (Wi-Fi thermostat not included)
