Uponor AquaPEX® tubing is used in hot and cold water distribution systems and AquaSAFE™ residential fire safety systems. Uponor AquaPEX® tubing is suitable for use in hydronic heating applications where the system contains no ferrous corrodible components or where any ferrous components are isolated from the tubing. Uponor AquaPEX® tubing coils and straight lengths come in red, white and blue for potable-water applications, and purple for water-reclamation applications. Uponor AquaPEX® tubing is manufactured and listed to ASTM F876 and F877 and CSA B137.5, certified to NSF Standards 14 and 61 and listed by the Hydrostatic Stress Board of PPI at 200 deg F at 80psi, 180 deg F at 100psi and 73.4 deg F at 160psi. Uponor AquaPEX® white tubing (1/2", 3/4", 1" and 1-1/4" only) is also listed to UL 1821 and ULC/ORD C199P and carries an additional rating of 120 deg F at 130psi. Pre-sleeved Uponor AquaPEX® tubing is used in hot and cold potable-water distribution systems. The high density polyethylene (HDPE) corrugated sleeve provides protection for installations in concrete slabs or soil, and allows for removal and replacement of the PEX tubing, if required.
Uponor AquaPEX® Tubing, Pre-Sleeved, 1/2 in Nominal Size, 0.81 in Inside Dia, 1 in Outside Dia, 400 ft Coil Length, 80 to 160 psi Working, 73.4 to 200 deg F, PEX, Blue
Wirsbo hePEX features an oxygen barrier that conforms to DIN 4726 for use in closed-loop hydronic piping and radiant heating and cooling applications. The tubing is rated and listed by the Hydrostatic Stress Board of PPI at 200 deg F at 80 psi, 180 deg F at 100 psi and 73.4 deg F at 160 psi. It is compatible with Uponor ProPEX and QS-style fittings and is manufactured in full compliance to ASTM F876 and F877. It is also listed to NSF 61 for potable-water applications.
Uponor Wirsbo® hePEX™ Tubing, 5/8 in Nominal Size, 0.574 in Inside Dia, 3/4 in Outside Dia, 1000 ft Coil Length, 80 to 160 psi Working, 73.4 to 200 deg F, PEX-A, White
Uponor's pre-insulated PEX pipe offering complies with ASHRAE 90.1-2013 and the 2012 International Energy Conservation Code (IECC). The pipe is available in 1/2" to 2" configurations with 1/2", 1", 11/2" and 2" insulation that features manufactured sealed seams that run the entire length of the coil. Check with local code authorities regarding energy-code requirements for specific applications.
Uponor's pre-insulated PEX pipe offering complies with ASHRAE 90.1-2013 and the 2012 International Energy Conservation Code (IECC). The pipe is available in 1/2" to 2" configurations with 1/2", 1", 11/2" and 2" insulation that features manufactured sealed seams that run the entire length of the coil. Check with local code authorities regarding energy-code requirements for specific applications.
All FasNSeal (single-wall) vent lengths and components feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90 deg from mechanical locking bands. This construction feature allows for ease of installation. The 1/2 in air space between the inner and outer wall on FasNSeal W2 helps to reduce the clearance to combustibles in addition to creating a heat shield for additional safety. All FasNSeal components which come in contact with exhaust gases and condensates are now silicone free. This important design and manufacturing feature greatly reduces the chances of system breakdown and failure. The main problems with silicone are there are too many adhesion factors which are very difficult to control and the process of binding similar materials with an epoxy, which can weaken the bond over time. Welded seams ensure a leak-free product that is meant to last.
DuraVent® FasNSeal® Special Gas Vent Pipe, Single Wall, 6 in Dia, 24 in Length, Stainless Steel
Uponor AquaPEX® white tubing is suitable for use in hydronic heating applications where the system contains no ferrous corrodible components or where any ferrous components are isolated from the tubing. Uponor AquaPEX® white tubing is manufactured and listed to ASTM F876 and F877 and CSA B137.5, certified to NSF Standards 14 and 61 and listed by the Hydrostatic Stress Board of PPI at 200 deg F at 80psi, 180 deg F at 100psi and 73.4 deg F at 160psi. Uponor AquaPEX® tubing (1/2", 3/4", 1" and 1-1/4" only) is also listed to UL 1821 and ULC/ORD C199P and carries an additional rating of 120 deg F at 130psi. Uponor AquaPEX® white tubing is marked with the PEX 5106 designation as required by the most recent edition of ASTM F876-15a, indicating it exceeds ASTM F876 chlorine-resistance requirements for continuous-recirculation systems operating up to 140 deg F while also affording a 30-day UV-resistance level.
Uponor AquaPEX® Tubing, 1 in Nominal Size, 0.862 in Inside Dia, 1-1/8 in Outside Dia, 100 ft Coil Length, 80 to 160 psi Working, 73.4 to 200 deg F, PEX, White
Uponor AquaPEX White, Uponor AquaPEX White with Red Print, and Uponor AquaPEX White with Blue Print is piping approved for use in hot and cold potable-water distribution as well as hydronic heating or cooling applications where the system contains no ferrous corrodible components or where any ferrous components are isolated from the pipe. Uponor AquaPEX White is approved for use in AquaSAFE(TM) residential fire safety systems. (Note that Uponor AquaPEX White with Red Print and Uponor AquaPEX White with Blue Print pipe is not approved for use in AquaSAFE systems.) Uponor AquaPEX Reclaimed Water (purple) piping is approved for use in reclaimed-water (graywater) applications.
Wirsbo hePEX™ tubing is used for closed-loop heating and cooling applications, including radiant and hydronic distribution. Wirsbo hePEX tubing has an EVOH oxygen diffusion barrier that meets German DIN 4726/9. A polyethylene layer extruded over the EVOH barrier protects tubing from site abuse and moisture saturation.
Uponor Wirsbo® hePEX™ Tubing, 1/2 in Nominal Size, 0.475 in Inside Dia, 5/8 in Outside Dia, 20 ft Straight Length, 80 to 160 psi Working, 73.4 to 200 deg F, PEX-A, White
Uponor AquaPEX® tubing is used in hot and cold water distribution systems and AquaSAFE™ residential fire safety systems. Uponor AquaPEX® tubing is suitable for use in hydronic heating applications where the system contains no ferrous corrodible components or where any ferrous components are isolated from the tubing. Uponor AquaPEX® tubing coils and straight lengths come in red, white and blue for potable-water applications, and purple for water-reclamation applications. Uponor AquaPEX® tubing is manufactured and listed to ASTM F876 and F877 and CSA B137.5, certified to NSF Standards 14 and 61 and listed by the Hydrostatic Stress Board of PPI at 200 deg F at 80psi, 180 deg F at 100psi and 73.4 deg F at 160psi. Uponor AquaPEX® white tubing (1/2", 3/4", 1" and 1-1/4" only) is also listed to UL 1821 and ULC/ORD C199P and carries an additional rating of 120 deg F at 130psi.
Uponor AquaPEX® Tubing, 2 in Nominal Size, 1.629 in Inside Dia, 2-1/8 in Outside Dia, 20 ft Straight Length, 80 to 160 psi Working, 73.4 to 200 deg F, PEX, White
Wirsbo hePEX™ tubing is used for closed-loop heating and cooling applications, including radiant and hydronic distribution. Wirsbo hePEX tubing has an EVOH oxygen diffusion barrier that meets German DIN 4726/9. A polyethylene layer extruded over the EVOH barrier protects tubing from site abuse and moisture saturation.
Uponor Wirsbo® hePEX™ Tubing, 1 in Nominal Size, 0.862 in Inside Dia, 1-1/4 in Outside Dia, 20 ft Straight Length, 80 to 160 psi Working, 73.4 to 200 deg F, PEX-A, White
