Approved for use in hot or cold potable water distibution - Approved for use in hydronic heating or cooling applications if the system contains no ferrous corrodible components - Not approved for use in Uponor AquaSAFE systems
Pipes 342
Approved for use in hot or cold potable water distibution - Approved for use in hydronic heating or cooling applications if the system contains no ferrous corrodible components - Not approved for use in Uponor AquaSAFE systems
Clear vinyl hose applications include: air conditioning and refrigeration condensate drains, condensate pump discharge lines and humidifier overflows.
Diversitech Drain Line Tubing, Accessory Type: Drain Line Tubing, 100 ft L, 0.25 in ID x 0.36 in OD, 0.055 in THK, Vinyl, Clear, Domestic
Wirsbo hePEX features an oxygen barrier that conforms to DIN 4726 for use in closed-loop hydronic piping and radiant heating and cooling applications. The tubing is rated and listed by the Hydrostatic Stress Board of PPI at 200 deg F at 80 psi, 180 deg F at 100 psi and 73.4 deg F at 160 psi. It is compatible with Uponor ProPEX and QS-style fittings and is manufactured in full compliance to ASTM F876 and F877. It is also listed to NSF 61 for potable-water applications.
Uponor Wirsbo® hePEX™ Tubing, 5/16 in Nominal Size, 0.292 in Inside Dia, 0.43 in Outside Dia, 250 ft Coil Length, 80 to 160 psi Working, 73.4 to 200 deg F, Polyethylene, White
Overview
Uponor AquaPEX White, Uponor AquaPEX White with Red Print, and Uponor AquaPEX White with Blue Print is piping approved for use in hot and cold potable-water distribution as well as hydronic heating or cooling applications where the system contains no ferrous corrodible components or where any ferrous components are isolated from the pipe. Uponor AquaPEX White is approved for use in AquaSAFE(TM) residential fire safety systems. (Note that Uponor AquaPEX White with Red Print and Uponor AquaPEX White with Blue Print pipe is not approved for use in AquaSAFE systems.) Uponor AquaPEX Reclaimed Water (purple) piping is approved for use in reclaimed-water (graywater) applications.
Pipe shall be manufactured from virgin rigid ABS (acrylonitrile butadiene styrene) compounds with a cell class of 42222 as identified in ASTM D 3965. Fittings shall be manufactured from virgin rigid ABS compounds with a cell class of 32222 as identified in ASTM D 3965. ABS cellular core pipe shall be Iron Pipe Size (IPS) conforming to ASTM F 628. Injection molded ABS DWV fittings shall conform to ASTM D 2661. All systems shall utilize a separate waste and vent system. All pipe and fittings shall be manufactured in the united states. Pipe and fittings shall conform to NSF International Standard 14.
Charlotte DWA Foam Core Pipe, 2 in Nominal, Plain, 2-3/8 in Outside Dia, 20 ft Length, 0.154 in Wall Thickness, SCH 40/STD, ABS, Black, ASTM F628, NSF Approved
For use in Heating, Cooling, and Snow Melt applications - Oxygen diffusion barrier, protective outer layer
Pipe shall be manufactured from virgin rigid ABS (acrylonitrile butadiene styrene) compounds with a cell class of 42222 as identified in ASTM D 3965. Fittings shall be manufactured from virgin rigid ABS compounds with a cell class of 32222 as identified in ASTM D 3965. ABS cellular core pipe shall be Iron Pipe Size (IPS) conforming to ASTM F 628. Injection molded ABS DWV fittings shall conform to ASTM D 2661. All systems shall utilize a separate waste and vent system. All pipe and fittings shall be manufactured in the united states. Pipe and fittings shall conform to NSF International Standard 14.
Charlotte DWA Foam Core Pipe, 2 in Nominal, Plain, 2-3/8 in Outside Dia, 20 ft Length, 0.154 in Wall Thickness, SCH 40/STD, ABS, Black, ASTM F628, NSF Approved
For use in Heating, Cooling, and Snow Melt applications - Oxygen diffusion barrier, protective outer layer
For use with PureFlow Press or PureFlow Crimp
Uponor AquaPEX® white tubing is suitable for use in hydronic heating applications where the system contains no ferrous corrodible components or where any ferrous components are isolated from the tubing. Uponor AquaPEX® white tubing is manufactured and listed to ASTM F876 and F877 and CSA B137.5, certified to NSF Standards 14 and 61 and listed by the Hydrostatic Stress Board of PPI at 200 deg F at 80psi, 180 deg F at 100psi and 73.4 deg F at 160psi. Uponor AquaPEX® tubing (1/2", 3/4", 1" and 1-1/4" only) is also listed to UL 1821 and ULC/ORD C199P and carries an additional rating of 120 deg F at 130psi. Uponor AquaPEX® white tubing is marked with the PEX 5106 designation as required by the most recent edition of ASTM F876-15a, indicating it exceeds ASTM F876 chlorine-resistance requirements for continuous-recirculation systems operating up to 140 deg F while also affording a 30-day UV-resistance level.
Uponor AquaPEX® Tubing, 1/2 in Nominal Size, 0.475 in Inside Dia, 5/8 in Outside Dia, 300 ft Coil Length, 80 to 160 psi Working, 73.4 to 200 deg F, PEX, White
Approved for use in hot or cold potable water distibution - Approved for use in hydronic heating or cooling applications if the system contains no ferrous corrodible components - Not approved for use in Uponor AquaSAFE systems
This 3/8 inch x 200 foot coil of Onix (TM) radiant tubing is used for underfloor radiant heating, snow melting, and hydronic supply and return piping installations. It is an EPDM-based, aramid fiber reinforced tube with an aluminum oxygen barrier. This tubing is highly flexible, does not expand and contract, and is ideal for underfloor applications. It is rated at 180 degrees F at 100 psi.
Watts Radiant™ Onix Radiant Tubing, 3/8 in Nominal, PEX, 3/8 in Inside Dia, 11/16 in Outside Dia, 200 ft Length, 0.31 in Wall Thickness, 180 psi Working, 70 to 180 deg F, EPDM, Black
Wirsbo hePEX features an oxygen barrier that conforms to DIN 4726 for use in closed-loop hydronic piping and radiant heating and cooling applications. The tubing is rated and listed by the Hydrostatic Stress Board of PPI at 200 deg F at 80 psi, 180 deg F at 100 psi and 73.4 deg F at 160 psi. It is compatible with Uponor ProPEX and QS-style fittings and is manufactured in full compliance to ASTM F876 and F877. It is also listed to NSF 61 for potable-water applications.
Uponor Wirsbo® hePEX™ Tubing, 3/8 in Nominal Size, 0.35 in Inside Dia, 1/2 in Outside Dia, 400 ft Coil Length, 80 to 160 psi Working, 73.4 to 200 deg F, PEX-A, White
Approved for use in hot or cold potable water distibution - Approved for use in hydronic heating or cooling applications if the system contains no ferrous corrodible components - Not approved for use in Uponor AquaSAFE systems
Uponor AquaPEX® white tubing is suitable for use in hydronic heating applications where the system contains no ferrous corrodible components or where any ferrous components are isolated from the tubing. Uponor AquaPEX® white tubing is manufactured and listed to ASTM F876 and F877 and CSA B137.5, certified to NSF Standards 14 and 61 and listed by the Hydrostatic Stress Board of PPI at 200 deg F at 80psi, 180 deg F at 100psi and 73.4 deg F at 160psi. Uponor AquaPEX® tubing (1/2", 3/4", 1" and 1-1/4" only) is also listed to UL 1821 and ULC/ORD C199P and carries an additional rating of 120 deg F at 130psi. Uponor AquaPEX® white tubing is marked with the PEX 5106 designation as required by the most recent edition of ASTM F876-15a, indicating it exceeds ASTM F876 chlorine-resistance requirements for continuous-recirculation systems operating up to 140 deg F while also affording a 30-day UV-resistance level.
Uponor AquaPEX® Tubing, 3/4 in Nominal Size, 0.671 in Inside Dia, 7/8 in Outside Dia, 100 ft Coil Length, 80 to 160 psi Working, 73.4 to 200 deg F, PEX, White
Approved for use in hot or cold potable water distibution - Approved for use in hydronic heating or cooling applications if the system contains no ferrous corrodible components - Not approved for use in Uponor AquaSAFE systems
Wirsbo hePEX™ tubing is used for closed-loop heating and cooling applications, including radiant and hydronic distribution. Wirsbo hePEX tubing has an EVOH oxygen diffusion barrier that meets German DIN 4726/9. A polyethylene layer extruded over the EVOH barrier protects tubing from site abuse and moisture saturation.
Uponor Wirsbo® hePEX™ Tubing, 3/4 in Nominal Size, 0.671 in Inside Dia, 7/8 in Outside Dia, 300 ft Straight Length, 80 to 160 psi Working, 73.4 to 200 deg F, Polyethylene, White
Overview
Uponor AquaPEX White, Uponor AquaPEX White with Red Print, and Uponor AquaPEX White with Blue Print is piping approved for use in hot and cold potable-water distribution as well as hydronic heating or cooling applications where the system contains no ferrous corrodible components or where any ferrous components are isolated from the pipe. Uponor AquaPEX White is approved for use in AquaSAFE(TM) residential fire safety systems. (Note that Uponor AquaPEX White with Red Print and Uponor AquaPEX White with Blue Print pipe is not approved for use in AquaSAFE systems.) Uponor AquaPEX Reclaimed Water (purple) piping is approved for use in reclaimed-water (graywater) applications.
For use with PureFlow Press or PureFlow Crimp
Uponor AquaPEX® tubing is used in hot and cold water distribution systems and AquaSAFE™ residential fire safety systems. Uponor AquaPEX® tubing is suitable for use in hydronic heating applications where the system contains no ferrous corrodible components or where any ferrous components are isolated from the tubing. Uponor AquaPEX® tubing coils and straight lengths come in red, white and blue for potable-water applications, and purple for water-reclamation applications. Uponor AquaPEX® tubing is manufactured and listed to ASTM F876 and F877 and CSA B137.5, certified to NSF Standards 14 and 61 and listed by the Hydrostatic Stress Board of PPI at 200 deg F at 80psi, 180 deg F at 100psi and 73.4 deg F at 160psi. Uponor AquaPEX® white tubing (1/2", 3/4", 1" and 1-1/4" only) is also listed to UL 1821 and ULC/ORD C199P and carries an additional rating of 120 deg F at 130psi.
Uponor AquaPEX® Tubing, 1-1/2 in Nominal Size, 1.244 in Inside Dia, 1-5/8 in Outside Dia, 20 ft Straight Length, 80 to 160 psi Working, 73.4 to 200 deg F, PEX, White
Wirsbo hePEX features an oxygen barrier that conforms to DIN 4726 for use in closed-loop hydronic piping and radiant heating and cooling applications. The tubing is rated and listed by the Hydrostatic Stress Board of PPI at 200 deg F at 80 psi, 180 deg F at 100 psi and 73.4 deg F at 160 psi. It is compatible with Uponor ProPEX and QS-style fittings and is manufactured in full compliance to ASTM F876 and F877. It is also listed to NSF 61 for potable-water applications.
Uponor Wirsbo® hePEX™ Tubing, 1/2 in Nominal Size, 0.475 in Inside Dia, 5/8 in Outside Dia, 300 ft Coil Length, 80 to 160 psi Working, 73.4 to 200 deg F, Polyethylene, White
Approved for use in hot or cold potable water distibution - Approved for use in hydronic heating or cooling applications if the system contains no ferrous corrodible components - Not approved for use in Uponor AquaSAFE systems