Honeywell, TH2110WF4008/U, Thermostat, Series: FocusPRO, 1.188 in Outside Depth, 5.13 in Outside Width, 3.44 in Outside Height, Programmable Thermostat
Thermostats 113
Selectable to 5-1-1 (Weekdays, Saturday, Sunday) or 5-2 (Weekdays, Weekend), or 7 day (All days seaparate) programming
Displays in 5.44 square inch standard backlit screen - Conventional systems have 1 heat and 1 cool stages - Heat pumps have 2 heat and 1 cool stages
Adaptive Intelligent Recovery ensures programmed temperature is reached by programmed time.
Precise comfort control which maintains consistent comfort - Dual powered; battery and/or hard wired
Automatic or manual changeover - Horizontal mount using UWP mounting system - Filter change reminders
Honeywell, TH2320U4006/U, Thermostat, Series: FocusPRO, 1.188 in Outside Depth, 5.13 in Outside Width, 3.44 in Outside Height, Programmable Thermostat
Old Number YTH5320R-1000
Includes: one TH5320R-1002/U Wireless FocusPRO Non-Programmable Thermostat, one C7735A-1000/U Return Air Sensor, and one THM5320R-1000/U Equipment Interface Module
RedLINK compatible - 2 heat and 2 cool stages for conventional systems - 3 heat and 2 cool stages for heat pumps - Automatic or manual changeover
Overview
Thermostatic technology allows you to maintain consistent temperature and flow control for the ultimate shower experience. This sleek thermostatic valve control panel with recessed push buttons is designed for use with an Anthem two-port thermostatic valve (K-26340). The trim plate includes a temperature control knob with integrated adjustable high-temperature limit stop as well as shower outlet activation buttons that pop out for the adjustment of water flow (up to 8 gpm).
Features
- Trim plate includes temperature control knob with integrated adjustable high-temperature limit stop and shower outlet on/off buttons
- When pressed once, shower outlet turns on and button pops out, becoming a knob for water flow adjustment
- When pressed back in, water turns off and outlet button aligns with control plate surface; flow setting remains intact
- High-temperature limit setting for added safety
- Low-profile design with easy-to-clean water-resistant casing
- Requires two-port thermostatic valve with integral volume control (sold separately)
- Handles up to 8 gpm (30.3 lpm) flow capacity (rate may vary by installation)
Installation
- Mounts on finished wall surface
Honeywell, TH1320U4002/U, Thermostat, Series: FocusPRO, 1.188 in Outside Depth, 5.13 in Outside Width, 3.44 in Outside Height, Non-Programmable Thermostat
Old Number T87K-1007
For low voltage control of 2 or 3 wire heating systems only
Overview
Pro1 thermostats are professional grade, built on proven performance and reliability. It s a difference you can see and feel. All Pro1 thermostats have the same size footprint, so you never have to worry about wall marks left by old models. You can also upgrade to new models, including WIFI, without rewiring using the interchangeable subbase system. Pro1 offers a full line of thermostats for nearly every application. Whether you need a basic 1 heat, 1 cool non-programmable or a 4 heat, 2 cool WIFI thermostat, Pro1 has you covered. All Pro1 thermostats share a removable badge that can easily be replaced with a custom badge that has your contact information. This free service is a great way to generate future business for your company.
Features
- Thermostat can be used with gas, electric or oil heat
- Millivolt heating: Yes
- Programming: None
- Display: Slider
- Stages of heat / cool (Conventional): 1H or 1C
- Auto changeover: No
- Programmable fan: No
- System switches: On - Off
- Fan switch: On - Auto
Overview
Pro1 thermostats are professional grade, built on proven performance and reliability. It s a difference you can see and feel. All Pro1 thermostats have the same size footprint, so you never have to worry about wall marks left by old models. You can also upgrade to new models, including WIFI, without rewiring using the interchangeable subbase system. Pro1 offers a full line of thermostats for nearly every application. Whether you need a basic 1 heat, 1 cool non-programmable or a 4 heat, 2 cool WIFI thermostat, Pro1 has you covered. All Pro1 thermostats share a removable badge that can easily be replaced with a custom badge that has your contact information. This free service is a great way to generate future business for your company.
Features
- Thermostat can be used with gas, electric or oil heat
- Power: 24 volt hard wired
- Millivolt heating: Yes
- Programming: 7 separate days and 5,1,1
- Display: 4 inch square LCD
- Stages of heat / cool (Conventional): 1H / 1C
- Stages of heat / cool (Heat pump): 1H / 1C
- Auto changeover: No
- Programmable fan: No
- System switches: Cool - Heat - Off
- Adjustable heat and cool temperature swings: Yes
- Compressor short cycle delay: Yes
- Fan switch: On - Auto
- Always on display light: No
- Adjustable setpoint limits: Yes
Battery operated and included - Uniform equipment compatible with dry contact switching (Normally open & Normally closed) - LCD Digital temperature display shows current or set temperature - Simple installation and functionality - Icons for heating call & low battery The Taco 568 is an extremely versatile digital thermostat. It is battery operated, with dry contact switching and is compatible with most types of hot water heating systems. It can operate conventional heating systems that require a contact closure when room temperature is below set temperature. It can also operate some failsafe systems that require a contact closure when room temperature is above set temperature.
Includes: one THX9421R-5021WW/U Programmable touchscreen thermostat, one THM5421R-1021/U equipment interface module, one C7089R-1013/U wireless outdoor sensor, and two duct sensors
3 heat and 2 cool stages for conventional systems - 4 heat and 2 cool stages for heat pumps - Automatic or manual changeover
Control heating, cooling and IAQ equipment with only 2 wires at the thermostat - Heating, cooling and IAQ equipment wires to the Equipment Interface Module
Smart Schedule programs in seconds for any lifestyle - Interview based programming and installer setup - RedLINK wireless communication
Selectable for residential and light commercial applications - Meets commercial code and is title 24 compliant
Light commercial or commercial language (occupied and unoccupied), schedule holidays and custom events, remote setback, economizer and time of day
Delta T Alerts and Diagnostics informs customers when their system is not performing as expected with instructions to contact the dealer - Comes standard with a return and discharge air temperature sensor to measure Delta T.
Alerts and User Interactions Log that keeps a searchable history of alerts and setting changes to the thermostat to determine if there is a system malfunction or if the issue was caused by user error
Performance Logs that keeps a history of heating and cooling performance - The performance log includes Minimum and Maximum Delta T, Minimum and Maximum Discharge Temperature, Minimum and Maximum Return Temperature, Minimum and Maximum Indoor Temperature/Humidity, Minimum and Maximum Outdoor Temperature/Humidity and Run Time
Customizable Service Reminders allow dealers to remind their customers when its time to call for service, when their warranty is expiring and to provide customized alerts
USB port for transferring Installer Setup, Customizable Reminders, Custom Events and Holidays to multiple thermostats or for adding the dealer's full color business logo on the screen
3 assignable outputs to control humidification, dehumidification, ventilation and a stage of heating or cooling - 4 assignable inputs on the Equipment Interface Module can be used with wired outdoor, indoor or discharge sensors, occupancy sensor for remote setback and dry contact devices to trip pre-packaged or custom alerts
Extend wireless range of the Equipment Interface Module by connecting a THM4000R1000 Wireless Adapter (sold separetly) to the ABCD terminals
Features
- Can monitor walk-in fridges/freezers with wired sensors
- Triggers automatic thermostat response for temperature alerts
- Ideal for restaurants and retail buildings
- Fahrenheit or Celsius display
- 365 day schedulin
- Automatic daylight saving time adjustment
- Adjustable Auto change-over dead-band
- Installer programmable options including:
-
- Heat and cool differential temperature
- Minimum compressor off time
- Heat and cool fan dissipation time
- Display temperature offse
- Outdoor temperature detection (requires internet connection)
- Reminders & alerts on screen or via emai
Honeywell, TH2110U4004/U, Thermostat, 0.02 to 1 A, Programmable Thermostat
Fieldpiece Folding Pocket In-Duct Thermometer, -58 to 392 deg F, +/-3.6 deg F Accuracy, 0.1 deg Resolution, AA Battery
Honeywell, TH2320WF4010/U, Thermostat, Series: FocusPRO, 1.188 in Outside Depth, 5.13 in Outside Width, 3.44 in Outside Height, Programmable Thermostat
Overview
Pro1 thermostats are professional grade, built on proven performance and reliability. It s a difference you can see and feel. All Pro1 thermostats have the same size footprint, so you never have to worry about wall marks left by old models. You can also upgrade to new models, including WIFI, without rewiring using the interchangeable subbase system. Pro1 offers a full line of thermostats for nearly every application. Whether you need a basic 1 heat, 1 cool non-programmable or a 4 heat, 2 cool WIFI thermostat, Pro1 has you covered. All Pro1 thermostats share a removable badge that can easily be replaced with a custom badge that has your contact information. This free service is a great way to generate future business for your company.
Features
- Thermostat can be used with gas, electric or oil heat
- Millivolt heating: Yes
- Programming: None
- Display: Slider
- Stages of heat / cool (Conventional): 1H / 1C
- Stages of heat / cool (Heat Pump): 1H / 1C
- Auto changeover: No
- Programmable fan: No
- System switches: Cool - Heat - Off
- Fan switch: On - Auto
Overview
The WiFi Thermostat 562 provides precise temperature control of a heating and cooling system. When connected to the Internet, the mobile app and website allow you to control the thermostat remotely. The thermostat and mobile app include an away feature that overrides the schedule to lower the temperature and increase energy savings. The thermostat is designed to support radiant floor heating and optional floor sensors can be installed to enhance comfort and protect floor coverings.
Features
- 3.5" color touchscreen
- 7 day programmable schedule
- Automatic software updates
- Away energy savings mode
- Early start
- Email error and warning notifications
- Energy monitoring
- English/Francais/Espanol languages
- Local weather
- Mobile app for iOS and Android
- Outdoor temperature
- Selectable background colors
- Supports optional floor sensor
- Time clock updated from Internet
Overview
With the Nest Temperature Sensor, you can let your Nest Thermostat E or Nest Learning Thermostat know which room should be a certain temperature at a certain time of day.
Features
- Works with the Nest Thermostat E or the 3rd gen Nest Learning Thermostat.
- Helps make sure a certain room is the exact temperature you want it to be.
- Put temperature sensors in different rooms. And choose which room to prioritize when.
- Place it on a wall or shelf. Set it up in the Nest app. Then forget that its even there.
- Up to 2-year battery life
Wireless connectivity from thermostat to smart phone, tablet, or other devices
7 day (All days seaparate) programming
Displays in 10 square inch standard backlit screen - Conventional systems have 2 heat and 2 cool stages - Heat pumps have 3 heat and 2 cool stages
Precise comfort control which maintains consistent comfort - Automatic or manual changeover - Horizontal mount
Selectable to 5-1-1 (Weekdays, Saturday, Sunday) or 5-2 (Weekdays, Weekend), or 7 day (All days separate) programming - Filter change reminder
Displays in 5.44 square inch standard backlit screen - Conventional systems have 2 heat and 2 cool stages - Heat pumps have 3 heat and 2 cool stages
Precise comfort control which maintains consistent comfort - Automatic or manual changeover - Horizontal mount using UWP mounting system
Overview
Pro1 thermostats are professional grade, built on proven performance and reliability. It s a difference you can see and feel. All Pro1 thermostats have the same size footprint, so you never have to worry about wall marks left by old models. You can also upgrade to new models, including WIFI, without rewiring using the interchangeable subbase system. Pro1 offers a full line of thermostats for nearly every application. Whether you need a basic 1 heat, 1 cool non-programmable or a 4 heat, 2 cool WIFI thermostat, Pro1 has you covered. All Pro1 thermostats share a removable badge that can easily be replaced with a custom badge that has your contact information. This free service is a great way to generate future business for your company.
Features
- Thermostat can be used with gas, electric or oil heat
- Power: 24 volt hard wired
- Millivolt heating: Yes
- Programming: 7 day using the keypad
- Display: 8 inch square LCD
- Stages of heat / cool (Conventional): 4H / 2C
- Stages of heat / cool (Heat pump): 5H / 3C
- Stages of dual fuel (HP / Gas): 3 / 2 - outdoor sensor is required (not included)
- Auto changeover: Yes
- Programmable fan: Yes
- System switches: Cool - Heat - Off
- Adjustable heat and cool temperature swings: Yes
- Compressor short cycle delay: Yes
- Fan switch: On - Auto
- Always on display light: Yes
- Adjustable setpoint limits: Yes
Heat-only thermostats with touchscreen are designed specifically for radiant floor heating. They use fully automatic differential and pulse width modulation (PWM) to ensure each zone or area is comfortable and energy efficient. The touchscreen provides a simple, intuitive display with large, easy-to-read numbers. The thermostat can control room temperature through operative temperature sensing, an optional floor sensor or a combination of both. The floor sensor can be used to maintain warm floors throughout the heating season as well as provide temperature limit protection. The thermostat is designed to operate using two wires, making it simple to install and service.
Uponor Heat-Only Thermostat, 24 V DC, 3-1/4 in W x 3/4 in D x 5-3/8 in H, Domestic
Old Number T4398A-1021
Provides high performance, precise line voltage control of resistive rated electric heating equipment
Extremely sensitive to temperature changes - Color coded leads allow easy installation - Includes long lasting Micro Switch mechanism.
Rugged plastic mounting base - Cover thermometer indicates room temperature.
Overview
This clean, minimalist remote on/off button is a simple way to provide actuation of your shower without having to step in. Designed to work seamlessly with your Anthem digital shower system, the wall-mount button acts as a secondary power control. Pairs with digital thermostatic valve via BLUETOOTH(R) wireless technology.
Features
- Acts as an auxiliary control for the Anthem digital shower system
- Pairs with your digital thermostatic valve using Bluetooth(R) wireless technology
- Provides simple on/off actuation of shower outlets
- Sleek, minimalist design
Installation
- Wall-mount
- Intended for outside of showering space
- Includes mounting hardware
- Requires Anthem digital valve (K-28209, K-28210, K-28211, or K-28212) and Anthem digital control (K-28214), each sold separately
Overview
This temporary construction thermostat is preset to a non-adjustable temperature. Ideal for saving on energy costs during construction.
RedLINK compatible - Can be connected to the equipment with the THM5421R-1021 Equipment Interface Module or with the THM4000R-1000 TrueZONE Wireless Adapter
7 day (All days seaparate) programming - Smart Schedule; programs in seconds for any lifestyle - Interview based programming and installer setup
Displays in 10 square inch standard backlit screen - Conventional systems have 2 heat and 2 cool stages - Heat pumps have 3 heat and 2 cool stages
Selectable for residential and light commercial applications - Light commercial - Commercial language (occupied and unoccupied), schedule holidays and custom events, economizer and time of day.
Plain language setup, no manual needed - Alerts and User Interactions Log keeps a searchable history of alerts and setting changes to the thermostat to determine if there is a system malfunction or if the issue was caused by a user error - Saves time in troubleshooting and points the technician in the right direction - The Alert and User Interaction Logs are viewable on a computer after you download them from the thermostat to a microSD card
Customizable Service Reminders allow dealers to remind their customers when its time to call for service, when their warranty is expiring and to provide customized alerts
MicroSD port for copying the Installer Setup, Customizable Reminders, Custom Events and Holidays to multiple thermostats - MicroSD port for adding the dealer's contact information on the screen
Precise comfort control which maintains consistent comfort - Automatic or manual changeover - Horizontal mount
Wireless connectivity from thermostat to smart phone, tablet, or other devices
Selectable to 5-1-1 (Weekdays, Saturday, Sunday) or 5-2 (Weekdays, Weekend), or 7 day (All days seaparate) or Geolocation programming
Displays in 6.89 square inch standard backlit screen - Conventional systems have 2 heat and 2 cool stages - Heat pumps have 2 heat and 1 cool stages
Setup and scheduling can be done at the wall on the thermostat, or using the Lyric app
Simple homeowner hand off process enables customers to complete the Wi-Fi connection process on their own
Integrates with smart home Apple HomeKit and Amazon Alexa for customers who want to control their smart home devices from a single app
Customers can program a schedule or use location based control with geofence technology, which uses their smartphone location to save energy when they're away and make the home comfortable when they return
Precise comfort control which maintains consistent comfort - Automatic or manual changeover - Horizontal mount using UWP mounting system
RedLINK compatible - Can be connected to the equipment with the THM5421R-1021 Equipment Interface Module or with the THM4000R-1000 TrueZONE Wireless Adapter
7 day (All days seaparate) programming - Smart Schedule; programs in seconds for any lifestyle - Interview based programming and installer setup
Displays in 10 square inch standard backlit screen - Conventional systems and heat pumps have 1 heat and 1 cool stages
Selectable for residential and light commercial applications - Light commercial - Commercial language (occupied and unoccupied), schedule holidays and custom events, economizer and time of day.
Plain language setup, no manual needed - Alerts and User Interactions Log keeps a searchable history of alerts and setting changes to the thermostat to determine if there is a system malfunction or if the issue was caused by a user error - Saves time in troubleshooting and points the technician in the right direction - The Alert and User Interaction Logs are viewable on a computer after you download them from the thermostat to a microSD card
Customizable Service Reminders allow dealers to remind their customers when its time to call for service, when their warranty is expiring and to provide customized alerts
MicroSD port for copying the Installer Setup, Customizable Reminders, Custom Events and Holidays to multiple thermostats - MicroSD port for adding the dealer's contact information on the screen
Precise comfort control which maintains consistent comfort - Automatic or manual changeover - Horizontal mount
Old Number TH9320WF-5003
Wireless connectivity from thermostat to smart phone, tablet, or other devices
7 day (All days seaparate) programming - Color touchscreen programming - Customize the screen color to match any decor
Displays in 8.06 square inch standard touchscreen - Conventional systems have 2 heat and 2 cool stages - Heat pumps have 3 heat and 2 cool stages
Automatic or manual changeover - Horizontal mount
<
Old Number T87N-1000
For low voltage control of heating and cooling systems, including heat pumps with no auxillary heating
Manual changeover from heating to cooling
Old Number TH4210D-1005
Weekday/Weekend programming - 5-2 (Weekdays, Weekend) programming - Horizontal mounting
Heat pump compatible - Backlit digital display - Current and set temperatures are easy to read in various lighting conditions
Precise comfort control maintains consistent comfort to the highest level of accuracy
Basic operation - Easy to use slide switches allow selection of the heat or cool mode, and operate the fan
Manual switchover from heating to cooling - Built in instructions - simple, pull out instruction manual
Adaptive Intelligent Recovery ensures programmed temperature is reached by programmed time
Features
- Reliable - No common wire? No problem. Comes with a Power Extender Kit so it doesn't rely on other equipment to charge itself.
- Simple - Designed for quick and easy installation- everything you need is in the box.
- Compatible - Works with gas, oil, electric, and dual fuel systems. Supports conventional (2H/2C) and heat pump (4H/2C) systems; ventilator, humidifier, dehumidifier, HRV, or ERV accessories.
- Comfort - Includes a SmartSensor to keep important rooms comfortable by adjusting your thermostat based on occupancy and temperature.
- Savings - Reduces energy use and helps homeowners save up to 23%* on heating and cooling costs. *Compared to a hold of 72 F. Learn more at ecobee.com/savings
- Advanced Control - With Alexa built-in, your customers can ask to play music, hear the news, check weather, control smart home devices, and more. Plus they can control from anywhere with any iOS or Android device.
Overview
Thermostatic technology allows you to maintain consistent temperature and flow control for the ultimate shower experience. This sleek thermostatic valve control panel with recessed push button is designed for use with an Anthem single-port thermostatic valve (K-26339). The trim plate includes a temperature control knob with integrated adjustable high-temperature limit stop as well as a shower outlet activation button that pops out for the adjustment of water flow (up to 7 gpm).
Features
- Trim plate includes temperature control knob with integrated adjustable high-temperature limit stop and shower outlet on/off button
- When pressed once, shower outlet turns on and button pops out, becoming a knob for water flow adjustment
- When pressed back in, water turns off and outlet button aligns with control plate surface; flow setting remains intact
- High-temperature limit setting for added safety
- Low-profile design with easy-to-clean water-resistant casing
- Requires one-port thermostatic valve with integral volume control (sold separately)
- Handles up to 7 gpm (26.5 lpm) flow capacity (rate may vary by installation)
Installation
- Mounts on finished wall surface
Overview
Thermostatic technology allows you to maintain consistent temperature and flow control for the ultimate shower experience. This sleek thermostatic valve control panel with recessed push buttons is designed for use with an Anthem four-port thermostatic valve (K-26342). The trim plate includes a temperature control knob with integrated adjustable high-temperature limit stop as well as shower outlet activation buttons that pop out for the adjustment of water flow (up to 8 gpm).
Features
- Trim plate includes temperature control knob with integrated adjustable high-temperature limit stop and shower outlet on/off buttons
- When pressed once, shower outlet turns on and button pops out, becoming a knob for water flow adjustment
- When pressed back in, water turns off and outlet button aligns with control plate surface; flow setting remains intact
- High-temperature limit setting for added safety
- Low-profile design with easy-to-clean water-resistant casing
- Requires four-port thermostatic valve with integral volume control (sold separately)
- Handles up to 8 gpm (30.3 lpm) flow capacity (rate may vary by installation)
Material
- Mounts on finished wall surface
Overview
The innovative Anthem digital control puts the control of your custom shower at your fingertips. A sleek, minimalist display lets you configure and control your outlets, temperature, and flow, creating a personalized showering experience every time. Optional built-in eco mode lets you conserve water by using just one outlet at a time, and the summary screen helps to promote mindful water usage.
Features
- Digital control with easy-to-read icons and configurable touch screen
- Control temperature, flow, and up to six shower outlets from a simple, intuitive interface
- Turn the large KOHLER(R) dial for easy temperature and flow rate adjustment
- Nine user-definable presets let you save your favorite shower settings
- Use with the KOHLER Konnect(R) app to unlock additional Anthem system features, Kohler-developed experiences, and system updates.
- System warm-up and pause feature
- Includes optional flow restrictor, limiting total flow to 1.75 gpm (6.6 lpm), for installations where water conservation or CEC compliance is desired
- Available in multiple languages
- Connect up to two controls within your digital shower system
- Requires an Anthem digital thermostatic valve (K-28209, K-28210, K-28211 or K-28212); sold separately
- Pair with optional Anthem remote on/off button (K-28213); sold separately
Material
- Premium material construction for durability and reliability
Installation
- After digital control is connected to valve and power source, follow on-screen prompts for easy setup; no Internet needed
- Wall-mount