Skip to main content

Contact our sales team for more information 860-221-SALE

Inside Sales
860-221-SALE

Unit Heaters 60

Manufacturer Filter

Manufacturer

Reset

Search within Unit Heaters

25 products — from Beacon Morris / Sterling / Suntemp, including out-of-stock

    Beacon Morris K-42 Twin Flo III Kickspace Unit Heater

    Beacon Morris / Sterling / Suntemp

    Item SKU - 55K42

    EDP - 114804

    In stock

    Overview

    4,278 BTU heating capacity at 180 degree water temperature with one gallon flow rate

    4 inches high - 12-1/4 inches wide - 12-3/4 inches deep

    TWIN-FLO III heaters are for use with forced hot water residential heating systems and consist of

    a copper tube, aluminum finned heating element, with an electric motor and blower of unique cross flow design.

    Their purpose is to deliver a comfortable stream of warmed air, at or near floor level, and their construction is extremely

    compact so minimum space is required for installation. The type K heater is used in horizontal floor installation, for

    example: under a kitchen counter cabinet, bathroom sink enclosure, or under a stair riser. They are ideal for hot water systems

    and are NOT for use with any steam system.

    All models have heating elements with 1/2" nominal (5/8" O.D.) copper tube connections, and a 115V electric blower motor

    interwired with a 120 degree F (49 degrees C) reverse acting aquastat that prevents operation until hot water is circulating.

    For gravity fed systems, it is recommended that a separate circulator pump be installed for the kickspace heater.

    Beacon Morris K-84 Twin Flo III Kickspace Unit Heater

    Beacon Morris / Sterling / Suntemp

    Item SKU - 55K84

    EDP - 241625

    In stock

    Overview

    8,460 BTU heating capacity at 180 degree water temperature with one gallon flow rate

    4 inches high - 19-1/4 inches wide - 12-3/4 inches deep

    TWIN-FLO III heaters are for use with forced hot water residential heating systems and consist of

    a copper tube, aluminum finned heating element, with an electric motor and blower of unique cross flow design.

    Their purpose is to deliver a comfortable stream of warmed air, at or near floor level, and their construction is extremely

    compact so minimum space is required for installation. The type K heater is used in horizontal floor installation, for

    example: under a kitchen counter cabinet, bathroom sink enclosure, or under a stair riser. They are ideal for hot water systems

    and are NOT for use with any steam system.

    All models have heating elements with 1/2" nominal (5/8" O.D.) copper tube connections, and a 115V electric blower motor

    interwired with a 120 degree F (49 degrees C) reverse acting aquastat that prevents operation until hot water is circulating.

    For gravity fed systems, it is recommended that a separate circulator pump be installed for the kickspace heater.

    Beacon Morris K-120 Twin Flo III Kickspace Unit Heater

    Beacon Morris / Sterling / Suntemp

    Item SKU - 55K120

    EDP - 326568

    In stock

    Overview

    11,585 BTU heating capacity at 180 degree water temperature with one gallon flow rate

    4 inches high - 19-1/4 inches wide - 12-3/4 inches deep

    TWIN-FLO III heaters are for use with forced hot water residential heating systems and consist of

    a copper tube, aluminum finned heating element, with an electric motor and blower of unique cross flow design.

    Their purpose is to deliver a comfortable stream of warmed air, at or near floor level, and their construction is extremely

    compact so minimum space is required for installation. The type K heater is used in horizontal floor installation, for

    example: under a kitchen counter cabinet, bathroom sink enclosure, or under a stair riser. They are ideal for hot water systems

    and are NOT for use with any steam system.

    All models have heating elements with 1/2" nominal (5/8" O.D.) copper tube connections, and a 115V electric blower motor

    interwired with a 120 degree F (49 degrees C) reverse acting aquastat that prevents operation until hot water is circulating.

    For gravity fed systems, it is recommended that a separate circulator pump be installed for the kickspace heater.

    STERLING HB036 UNIT HEATER

    Beacon Morris / Sterling / Suntemp

    Item SKU - MISID_1342422

    EDP - 1342422

    Out of stock

    BEA FS1005 12 CAB HEATER

    Beacon Morris / Sterling / Suntemp

    Item SKU - FS100512

    EDP - 1324066

    Out of stock

    BEA FS1005 14 CAB HEATER

    Beacon Morris / Sterling / Suntemp

    Item SKU - FS100514

    EDP - 1324067

    Out of stock

    BEA FS1000 08 CAB HEATER

    Beacon Morris / Sterling / Suntemp

    Item SKU - FS100008

    EDP - 1324069

    Out of stock

    BEA FS1005-04 CAB HEATER

    Beacon Morris / Sterling / Suntemp

    Item SKU - FS100504

    EDP - 1324064

    Out of stock

    BEA FS1005 08 CAB HEATER

    Beacon Morris / Sterling / Suntemp

    Item SKU - FS100508

    EDP - 1324065

    Out of stock

    BEA F1000-03 UNIT HEATER

    Beacon Morris / Sterling / Suntemp

    Item SKU - MISID_950488

    EDP - 950488

    Out of stock

    Beacon Morris BRT60-61NSA11C Natural Gas Unit Heater

    Beacon Morris / Sterling / Suntemp

    Item SKU - BRT60-61NSA11C

    EDP - 396235

    Out of stock

    60,000 BTU input - 49,800 BTU output - 83.0% thermal efficiency - 30 inches wide - 31-1/2 inches deep - 16 inches high

    Redundant single stage gas valve - Residential certification - 120/24V Control transformer - 115 volt, single phase, 60 herz fan motor with internal overload protection

    Direct spark ignition - 20 Gauge cabinet with baked enamel finish - High limit switch - Right hand control access

    Air pressure switch - Natural Gas with LP conversion kit included - Stainless steel burner box - 20 Gauge Aluminized heat exchanger

    Power vent

    Beacon Morris BRT30-61NSA11C Natural Gas Unit Heater

    Beacon Morris / Sterling / Suntemp

    Item SKU - BRT30-61NSA11C

    EDP - 677813

    Out of stock

    30,000 BTU input - 24,900 BTU output - 83.0% thermal efficiency - 30 inches wide - 20-3/4 inches deep - 13-1/4 inches high

    Redundant single stage gas valve - Residential certification - 120/24V Control transformer - 115 volt, single phase, 60 herz fan motor with internal overload protection

    Direct spark ignition - 20 Gauge cabinet with baked enamel finish - High limit switch - Right hand control access

    Air pressure switch - Natural Gas with LP conversion kit included - Stainless steel burner box - 20 Gauge Aluminized heat exchanger

    Power vent

    Beacon Morris HBB084-11 Hot Water or Steam Unit Heater

    Beacon Morris / Sterling / Suntemp

    Item SKU - HBB084-11

    EDP - 333271

    Out of stock

    Water: 61,000 BTU output based on 200 degree water temperaure

    Steam: 84,000 BTU output based on two pounds steam pressure at the heater

    20.875 inches wide - 11.8125 inches deep - 24-1/4 inches high - Weighs 41 pounds - Aluminum fins on copper heat exchanger

    Standard header type coil heat exchanger - 1-1/4 inch feed and return

    115 volt, single phase, 60 herz fan motor - 14 inch diameter fan - OSHA type wire fan guard - Horizontal louvers

    Beacon Morris HBB060-11 Hot Water or Steam Unit Heater

    Beacon Morris / Sterling / Suntemp

    Item SKU - HBB060-11

    EDP - 333269

    Out of stock

    Water: 43,600 BTU output based on 200 degree water temperaure

    Steam: 60,000 BTU output based on two pounds steam pressure at the heater

    17.125 inches wide - 10.9375 inches deep - 20-1/2 inches high - Weighs 41 pounds - Aluminum fins on copper heat exchanger

    Standard header type coil heat exchanger - 1-1/4 inch feed and return

    115 volt, single phase, 60 herz fan motor - 12 inch diameter fan - OSHA type wire fan guard - Horizontal louvers

    Beacon Morris HBB036-11 Hot Water or Steam Unit Heater

    Beacon Morris / Sterling / Suntemp

    Item SKU - HBB036-11

    EDP - 333267

    Out of stock

    Water: 26,100 BTU output based on 200 degree water temperaure

    Steam: 36,000 BTU output based on two pounds steam pressure at the heater

    14.625 inches wide - 9.375 inches deep - 1 inches high - Weighs 30 pounds - Aluminum fins on copper heat exchanger

    Standard header type coil heat exchanger - 1-1/4 inch feed and return

    115 volt, single phase, 60 herz fan motor - 10 inch diameter fan - OSHA type wire fan guard - Horizontal louvers

    Beacon Morris HBB024-11 Hot Water or Steam Unit Heater

    Beacon Morris / Sterling / Suntemp

    Item SKU - HBB024-11

    EDP - 333266

    Out of stock

    Water: 17,400 BTU output based on 200 degree water temperaure

    Steam: 24,000 BTU output based on two pounds steam pressure at the heater

    14.625 inches wide - 9.375 inches deep - 18 inches high - Weighs 30 pounds - Aluminum fins on copper heat exchanger

    Standard header type coil heat exchanger - 1-1/4 inch feed and return

    115 volt, single phase, 60 herz fan motor - 10 inch diameter fan - OSHA type wire fan guard - Horizontal louvers

    Beacon Morris HBB018-11 Hot Water or Steam Unit Heater

    Beacon Morris / Sterling / Suntemp

    Item SKU - HBB018-11

    EDP - 333264

    Out of stock

    Water: 13,050 BTU output based on 200 degree water temperaure

    Steam: 18,000 BTU output based on two pounds steam pressure at the heater

    14.625 inches wide - 9.375 inches deep - 15 inches high - Weighs 26 pounds - Aluminum fins on copper heat exchanger

    Standard header type coil heat exchanger - 1-1/4 inch feed and return

    115 volt, single phase, 60 herz fan motor - 9 inch diameter fan - OSHA type wire fan guard - Horizontal louvers

    Beacon Morris HBB048-11 Hot Water or Steam Unit Heater

    Beacon Morris / Sterling / Suntemp

    Item SKU - HBB048-11

    EDP - 333258

    Out of stock

    Water: 34,800 BTU output based on 200 degree water temperaure

    Steam: 48,000 BTU output based on two pounds steam pressure at the heater

    17.125 inches wide - 11.4375 inches deep - 20-1/2 inches high - Weighs 41 pounds - Aluminum fins on copper heat exchanger

    Standard header type coil heat exchanger - 1-1/4 inch feed and return

    115 volt, single phase, 60 herz fan motor - 12 inch diameter fan - OSHA type wire fan guard - Horizontal louvers

    Beacon Morris BRT45-61NSA11C Natural Gas Unit Heater

    Beacon Morris / Sterling / Suntemp

    Item SKU - BRT45-61NSA11C

    EDP - 674559

    Out of stock

    45,000 BTU input - 37,350 BTU output - 83.0% thermal efficiency - 30 inches wide - 20-3/4 inches deep - 13-1/4 inches high

    Redundant single stage gas valve - Residential certification - 120/24V Control transformer - 115 volt, single phase, 60 herz fan motor with internal overload protection

    Direct spark ignition - 20 Gauge cabinet with baked enamel finish - High limit switch - Right hand control access

    Air pressure switch - Natural Gas with LP conversion kit included - Stainless steel burner box - 20 Gauge Aluminized heat exchanger

    Power vent

    Beacon Morris BRT75-61NSA11C Natural Gas Unit Heater

    Beacon Morris / Sterling / Suntemp

    Item SKU - BRT75-61NSA11C

    EDP - 569864

    Out of stock

    75,000 BTU input - 61,500 BTU output - 82.0% thermal efficiency - 30 inches wide - 26-3/16 inches deep - 16-13/16 inches high

    Redundant single stage gas valve - Residential certification - 120/24V Control transformer - 115 volt, single phase, 60 herz fan motor with internal overload protection

    Direct spark ignition - 20 Gauge cabinet with baked enamel finish - High limit switch - Right hand control access

    Air pressure switch - Natural Gas with LP conversion kit included - Stainless steel burner box - 20 Gauge Aluminized heat exchanger

    Power vent