The Hart & Cooley double wall, air insulated B Vent system is secured by locking joints. Properly installed, the
vent won't come apart through vibration, and offers protection against vent failure or fire hazard. Type B Gas Vent
is designed for negative pressure applications and flue gas temperatures not exceeding 400 Degrees above ambient for
Category I appliances. By using high quality materials and skilled workmanship, the galvanized outer pipe and aluminum
inner pipe provide protection against corrosion and external damage. Hart & Cooley's simple two step engagement helps
installers achieve installation quickly and easily. Simply engage pipe sections and secure by sliding the lock ring over
security tabs. This unique system creates a strong connection without the use of screws. With our complete offering of
fittings, supports, and caps, Hart & Cooley B Vent is your most valuable teammate to complete any installation.
Features
The assembled length is the total length less 1-3/8" overlap
The outside diameter is the size plus 1"
The inner and outer ends of the pipe are curled together as an integral unit
Reinforced ends: curled bead on end of outer pipe provides rigidity and strength
Deep locking groove assures a solid joint and secure lock
Positive stop provides proper alignment and positive fit for mating end of pipe
Hart and Cooley model TLC All Fuel Chimney offers current technology in a factory built chimney design by providing
superior performance, durability and safety. Model TLC is extremely corrosion resistant. Both the inner liner and outer casings
are constructed of type 304 stainless steel. Embossed couplers do not allow moisture to penetrate the chimney's outer wall.
Sections simply twist lock together and are secured with Locking Bands. The Model TLC product line features deluxe chimney
support components that will enhance any installation. Black trims are used to embellish the chimney support component parts
that may be installed inside the home. All Model TLC supports are designed to carry four times the UL listed weight of the listed
height. Model TLC is safety tested and listed to applicable UL safety standards for chimneys serving solid fuel and liquid fuel
appliances. This includes UL 103. This chimney system is designed for use on appliances that use solid, liquid or gas fuels
under natural draft conditions.
Features
All fuel for use with oil, gas or wood burning appliances
Includes a locking band
The outside diameter is 2" larger than the inside diameter
The assembled length is the total length less 1-1/4" overlap
Type HT 5" to 8" allowable flue gas temperatures:
Maximum continuous: 1000 degrees - Brief forced firing (1 hour): 1400 degrees - Creosote burn out (10 minutes): 2100 degrees
Type NON-HT 10" to 14" allowable flue gas temperatures:
Maximum continuous: 1000 degrees - Brief forced firing (1 hour): 1400 degrees - Creosote burn out (10 minutes): 1700 degrees
Embossed coupler prevents moisture penetration
Mineral wool insulation is augered in for better insulation value and to keep the outside pipe temperatures low for safety while the
inside temperatures remain high for performance
Twist lock connection for easy assembly
The chimney must extend at least 3' above the highest point where it passes through the roof surface, and at least 2' higher than
any part of the building within a horizontal distance of 10'
The Hart & Cooley double wall, air insulated B Vent system is secured by locking joints. Properly installed, the
vent won't come apart through vibration, and offers protection against vent failure or fire hazard. Type B Gas Vent
is designed for negative pressure applications and flue gas temperatures not exceeding 400 Degrees above ambient for
Category I appliances. By using high quality materials and skilled workmanship, the galvanized outer pipe and aluminum
inner pipe provide protection against corrosion and external damage. Hart & Cooley's simple two step engagement helps
installers achieve installation quickly and easily. Simply engage pipe sections and secure by sliding the lock ring over
security tabs. This unique system creates a strong connection without the use of screws. With our complete offering of
fittings, supports, and caps, Hart & Cooley B Vent is your most valuable teammate to complete any installation.
Features
The assembled length is the total length less 1-3/8" overlap
The outside diameter is the size plus 1"
The inner and outer ends of the pipe are curled together as an integral unit
Reinforced ends: curled bead on end of outer pipe provides rigidity and strength
Deep locking groove assures a solid joint and secure lock
Positive stop provides proper alignment and positive fit for mating end of pipe
The Heatfab Saf-T Vent SC is a concentric vent system designed for zero clearance installation in residential and light
commercial applications. It is approved for use on ANSI Category I, II, III, and IV Gas Burning Appliances, and Direct Vent or
Sealed Combustion Appliances as approved by the appliance manufacturer. The Saf-T Vent SC factory built Special Gas
Vent and Gas Vent Connector is Tested and Listed by Underwriters Laboratories to UL 1738/ULC S636 and is for use with
listed natural gas or propane burning equipment. The system is to be installed and sealed per the manufacturers'
instructions so the flue gas conduit is gas tight, preventing leakage of products of combustion into a building. Saf-T Vent SC
is a double wall product that consists of a flue gas conduit fabricated from AL 29-4C, which is ideal for use with modern
gas burning equipment that may produce excessive amounts of condensation in the vent. The outer jacket of the system is
constructed from stainless steel with a space of approximately one inch between the flue gas conduit and the jacket.
Features
Adjustable from 12-1/2" to 19-1/2" long
Factory built for high quality, durability and long life
Concentric venting speeds installation with exhaust and intake through one vent that requires only one wall penetration
7" outside diameter
Component connection system engineered with an overlapping joint design to keep acidic condensate away from the seal
The Heatfab Saf-T Vent SC is a concentric vent system designed for zero clearance installation in residential and light
commercial applications. It is approved for use on ANSI Category I, II, III, and IV Gas Burning Appliances, and Direct Vent or
Sealed Combustion Appliances as approved by the appliance manufacturer. The Saf-T Vent SC factory built Special Gas
Vent and Gas Vent Connector is Tested and Listed by Underwriters Laboratories to UL 1738/ULC S636 and is for use with
listed natural gas or propane burning equipment. The system is to be installed and sealed per the manufacturers'
instructions so the flue gas conduit is gas tight, preventing leakage of products of combustion into a building. Saf-T Vent SC
is a double wall product that consists of a flue gas conduit fabricated from AL 29-4C, which is ideal for use with modern
gas burning equipment that may produce excessive amounts of condensation in the vent. The outer jacket of the system is
constructed from stainless steel with a space of approximately one inch between the flue gas conduit and the jacket.
Features
Factory built for high quality, durability and long life
Concentric venting speeds installation with exhaust and intake through one vent that requires only one wall penetration
7" outside diameter
Component connection system engineered with an overlapping joint design to keep acidic condensate away from the seal
All FasNSeal (single-wall) vent lengths and components feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90 deg from mechanical locking bands. This construction feature allows for ease of installation. The 1/2 in air space between the inner and outer wall on FasNSeal W2 helps to reduce the clearance to combustibles in addition to creating a heat shield for additional safety. All FasNSeal components which come in contact with exhaust gases and condensates are now silicone free. This important design and manufacturing feature greatly reduces the chances of system breakdown and failure. The main problems with silicone are there are too many adhesion factors which are very difficult to control and the process of binding similar materials with an epoxy, which can weaken the bond over time. Welded seams ensure a leak-free product that is meant to last.
DuraVent® FasNSeal® Special Gas Vent Pipe, Single Wall, 4 in Dia, 24 in Length, Stainless Steel
The Hart & Cooley double wall, air insulated B Vent system is secured by locking joints. Properly installed, the
vent won't come apart through vibration, and offers protection against vent failure or fire hazard. Type B Gas Vent
is designed for negative pressure applications and flue gas temperatures not exceeding 400 Degrees above ambient for
Category I appliances. By using high quality materials and skilled workmanship, the galvanized outer pipe and aluminum
inner pipe provide protection against corrosion and external damage. Hart & Cooley's simple two step engagement helps
installers achieve installation quickly and easily. Simply engage pipe sections and secure by sliding the lock ring over
security tabs. This unique system creates a strong connection without the use of screws. With our complete offering of
fittings, supports, and caps, Hart & Cooley B Vent is your most valuable teammate to complete any installation.
Features
The assembled length is the total length less 1-3/8" overlap
The outside diameter is the size plus 1/2"
The inner and outer ends of the pipe are curled together as an integral unit
Reinforced ends: curled bead on end of outer pipe provides rigidity and strength
Deep locking groove assures a solid joint and secure lock
Positive stop provides proper alignment and positive fit for mating end of pipe
The Hart & Cooley double wall, air insulated B Vent system is secured by locking joints. Properly installed, the
vent won't come apart through vibration, and offers protection against vent failure or fire hazard. Type B Gas Vent
is designed for negative pressure applications and flue gas temperatures not exceeding 400 Degrees above ambient for
Category I appliances. By using high quality materials and skilled workmanship, the galvanized outer pipe and aluminum
inner pipe provide protection against corrosion and external damage. Hart & Cooley's simple two step engagement helps
installers achieve installation quickly and easily. Simply engage pipe sections and secure by sliding the lock ring over
security tabs. This unique system creates a strong connection without the use of screws. With our complete offering of
fittings, supports, and caps, Hart & Cooley B Vent is your most valuable teammate to complete any installation.
Features
The assembled length is the total length less 1-3/8" overlap
The outside diameter is the size plus 1/2"
The inner and outer ends of the pipe are curled together as an integral unit
Reinforced ends: curled bead on end of outer pipe provides rigidity and strength
Deep locking groove assures a solid joint and secure lock
Positive stop provides proper alignment and positive fit for mating end of pipe
The Hart & Cooley double wall, air insulated B Vent system is secured by locking joints. Properly installed, the
vent won't come apart through vibration, and offers protection against vent failure or fire hazard. Type B Gas Vent
is designed for negative pressure applications and flue gas temperatures not exceeding 400 Degrees above ambient for
Category I appliances. By using high quality materials and skilled workmanship, the galvanized outer pipe and aluminum
inner pipe provide protection against corrosion and external damage. Hart & Cooley's simple two step engagement helps
installers achieve installation quickly and easily. Simply engage pipe sections and secure by sliding the lock ring over
security tabs. This unique system creates a strong connection without the use of screws. With our complete offering of
fittings, supports, and caps, Hart & Cooley B Vent is your most valuable teammate to complete any installation.
Features
The assembled length is the total length less 1-3/8" overlap
The outside diameter is the size plus 1/2"
The inner and outer ends of the pipe are curled together as an integral unit
Reinforced ends: curled bead on end of outer pipe provides rigidity and strength
Deep locking groove assures a solid joint and secure lock
Positive stop provides proper alignment and positive fit for mating end of pipe
All FasNSeal (single-wall) vent lengths and components feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90 deg from mechanical locking bands. This construction feature allows for ease of installation. The 1/2 in air space between the inner and outer wall on FasNSeal W2 helps to reduce the clearance to combustibles in addition to creating a heat shield for additional safety. All FasNSeal components which come in contact with exhaust gases and condensates are now silicone free. This important design and manufacturing feature greatly reduces the chances of system breakdown and failure. The main problems with silicone are there are too many adhesion factors which are very difficult to control and the process of binding similar materials with an epoxy, which can weaken the bond over time. Welded seams ensure a leak-free product that is meant to last.
DuraVent® FasNSeal® Vent, Single Wall, 4 in Dia, 18 in Adjustable Length, Stainless Steel
The Hart & Cooley double wall, air insulated B Vent system is secured by locking joints. Properly installed, the
vent won't come apart through vibration, and offers protection against vent failure or fire hazard. Type B Gas Vent
is designed for negative pressure applications and flue gas temperatures not exceeding 400 Degrees above ambient for
Category I appliances. By using high quality materials and skilled workmanship, the galvanized outer pipe and aluminum
inner pipe provide protection against corrosion and external damage. Hart & Cooley's simple two step engagement helps
installers achieve installation quickly and easily. Simply engage pipe sections and secure by sliding the lock ring over
security tabs. This unique system creates a strong connection without the use of screws. With our complete offering of
fittings, supports, and caps, Hart & Cooley B Vent is your most valuable teammate to complete any installation.
Features
The length is adjustable from 1" to 10" longer
The assembled length is the total length less 1-3/8" overlap
The outside diameter is the size plus 1/2"
The inner and outer ends of the pipe are curled together as an integral unit
Reinforced ends: curled bead on end of outer pipe provides rigidity and strength
Deep locking groove assures a solid joint and secure lock
Positive stop provides proper alignment and positive fit for mating end of pipe
Hart and Cooley model TLC All Fuel Chimney offers current technology in a factory built chimney design by providing
superior performance, durability and safety. Model TLC is extremely corrosion resistant. Both the inner liner and outer casings
are constructed of type 304 stainless steel. Embossed couplers do not allow moisture to penetrate the chimney's outer wall.
Sections simply twist lock together and are secured with Locking Bands. The Model TLC product line features deluxe chimney
support components that will enhance any installation. Black trims are used to embellish the chimney support component parts
that may be installed inside the home. All Model TLC supports are designed to carry four times the UL listed weight of the listed
height. Model TLC is safety tested and listed to applicable UL safety standards for chimneys serving solid fuel and liquid fuel
appliances. This includes UL 103. This chimney system is designed for use on appliances that use solid, liquid or gas fuels
under natural draft conditions.
Features
All fuel for use with oil, gas or wood burning appliances
Includes a locking band
The outside diameter is 2" larger than the inside diameter
The assembled length is the total length less 1-1/8" overlap
Type HT 5" to 8" allowable flue gas temperatures:
Maximum continuous: 1000 degrees - Brief forced firing (1 hour): 1400 degrees - Creosote burn out (10 minutes): 2100 degrees
Type NON-HT 10" to 14" allowable flue gas temperatures:
Maximum continuous: 1000 degrees - Brief forced firing (1 hour): 1400 degrees - Creosote burn out (10 minutes): 1700 degrees
Embossed coupler prevents moisture penetration
Mineral wool insulation is augered in for better insulation value and to keep the outside pipe temperatures low for safety while the
inside temperatures remain high for performance
Twist lock connection for easy assembly
The chimney must extend at least 3' above the highest point where it passes through the roof surface, and at least 2' higher than
any part of the building within a horizontal distance of 10'
All FasNSeal (single-wall) vent lengths and components feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90 deg from mechanical locking bands. This construction feature allows for ease of installation. The 1/2 in air space between the inner and outer wall on FasNSeal W2 helps to reduce the clearance to combustibles in addition to creating a heat shield for additional safety. All FasNSeal components which come in contact with exhaust gases and condensates are now silicone free. This important design and manufacturing feature greatly reduces the chances of system breakdown and failure. The main problems with silicone are there are too many adhesion factors which are very difficult to control and the process of binding similar materials with an epoxy, which can weaken the bond over time. Welded seams ensure a leak-free product that is meant to last.
DuraVent® FasNSeal® Special Gas Vent Pipe, Single Wall, 4 in Dia, 18 in Length, Stainless Steel
All FasNSeal (single-wall) vent lengths and components feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90 deg from mechanical locking bands. This construction feature allows for ease of installation. The 1/2 in air space between the inner and outer wall on FasNSeal W2 helps to reduce the clearance to combustibles in addition to creating a heat shield for additional safety. All FasNSeal components which come in contact with exhaust gases and condensates are now silicone free. This important design and manufacturing feature greatly reduces the chances of system breakdown and failure. The main problems with silicone are there are too many adhesion factors which are very difficult to control and the process of binding similar materials with an epoxy, which can weaken the bond over time. Welded seams ensure a leak-free product that is meant to last.
DuraVent® FasNSeal® Vent, Single Wall, 3 in Dia, 18 in Adjustable Length, Stainless Steel
The Hart & Cooley double wall, air insulated B Vent system is secured by locking joints. Properly installed, the
vent won't come apart through vibration, and offers protection against vent failure or fire hazard. Type B Gas Vent
is designed for negative pressure applications and flue gas temperatures not exceeding 400 Degrees above ambient for
Category I appliances. By using high quality materials and skilled workmanship, the galvanized outer pipe and aluminum
inner pipe provide protection against corrosion and external damage. Hart & Cooley's simple two step engagement helps
installers achieve installation quickly and easily. Simply engage pipe sections and secure by sliding the lock ring over
security tabs. This unique system creates a strong connection without the use of screws. With our complete offering of
fittings, supports, and caps, Hart & Cooley B Vent is your most valuable teammate to complete any installation.
Features
The assembled length is the total length less 1-3/8" overlap
The outside diameter is the size plus 1/2"
The inner and outer ends of the pipe are curled together as an integral unit
Reinforced ends: curled bead on end of outer pipe provides rigidity and strength
Deep locking groove assures a solid joint and secure lock
Positive stop provides proper alignment and positive fit for mating end of pipe
Hart and Cooley model TLC All Fuel Chimney offers current technology in a factory built chimney design by providing
superior performance, durability and safety. Model TLC is extremely corrosion resistant. Both the inner liner and outer casings
are constructed of type 304 stainless steel. Embossed couplers do not allow moisture to penetrate the chimney's outer wall.
Sections simply twist lock together and are secured with Locking Bands. The Model TLC product line features deluxe chimney
support components that will enhance any installation. Black trims are used to embellish the chimney support component parts
that may be installed inside the home. All Model TLC supports are designed to carry four times the UL listed weight of the listed
height. Model TLC is safety tested and listed to applicable UL safety standards for chimneys serving solid fuel and liquid fuel
appliances. This includes UL 103. This chimney system is designed for use on appliances that use solid, liquid or gas fuels
under natural draft conditions.
Features
All fuel for use with oil, gas or wood burning appliances
Includes a locking band
The outside diameter is 2" larger than the inside diameter
The assembled length is the total length less 1-1/8" overlap
Type HT 5" to 8" allowable flue gas temperatures:
Maximum continuous: 1000 degrees - Brief forced firing (1 hour): 1400 degrees - Creosote burn out (10 minutes): 2100 degrees
Type NON-HT 10" to 14" allowable flue gas temperatures:
Maximum continuous: 1000 degrees - Brief forced firing (1 hour): 1400 degrees - Creosote burn out (10 minutes): 1700 degrees
Embossed coupler prevents moisture penetration
Mineral wool insulation is augered in for better insulation value and to keep the outside pipe temperatures low for safety while the
inside temperatures remain high for performance
Twist lock connection for easy assembly
The chimney must extend at least 3' above the highest point where it passes through the roof surface, and at least 2' higher than
any part of the building within a horizontal distance of 10'
The Hart & Cooley double wall, air insulated B Vent system is secured by locking joints. Properly installed, the
vent won't come apart through vibration, and offers protection against vent failure or fire hazard. Type B Gas Vent
is designed for negative pressure applications and flue gas temperatures not exceeding 400 Degrees above ambient for
Category I appliances. By using high quality materials and skilled workmanship, the galvanized outer pipe and aluminum
inner pipe provide protection against corrosion and external damage. Hart & Cooley's simple two step engagement helps
installers achieve installation quickly and easily. Simply engage pipe sections and secure by sliding the lock ring over
security tabs. This unique system creates a strong connection without the use of screws. With our complete offering of
fittings, supports, and caps, Hart & Cooley B Vent is your most valuable teammate to complete any installation.
Features
The assembled length is the total length less 1-3/8" overlap
The outside diameter is the size plus 1/2"
The inner and outer ends of the pipe are curled together as an integral unit
Reinforced ends: curled bead on end of outer pipe provides rigidity and strength
Deep locking groove assures a solid joint and secure lock
Positive stop provides proper alignment and positive fit for mating end of pipe
The Hart & Cooley double wall, air insulated B Vent system is secured by locking joints. Properly installed, the
vent won't come apart through vibration, and offers protection against vent failure or fire hazard. Type B Gas Vent
is designed for negative pressure applications and flue gas temperatures not exceeding 400 Degrees above ambient for
Category I appliances. By using high quality materials and skilled workmanship, the galvanized outer pipe and aluminum
inner pipe provide protection against corrosion and external damage. Hart & Cooley's simple two step engagement helps
installers achieve installation quickly and easily. Simply engage pipe sections and secure by sliding the lock ring over
security tabs. This unique system creates a strong connection without the use of screws. With our complete offering of
fittings, supports, and caps, Hart & Cooley B Vent is your most valuable teammate to complete any installation.
Features
The assembled length is the total length less 1-3/8" overlap
The outside diameter is the size plus 1/2"
The inner and outer ends of the pipe are curled together as an integral unit
Reinforced ends: curled bead on end of outer pipe provides rigidity and strength
Deep locking groove assures a solid joint and secure lock
Positive stop provides proper alignment and positive fit for mating end of pipe
All FasNSeal (single-wall) vent lengths and components feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90 deg from mechanical locking bands. This construction feature allows for ease of installation. The 1/2 in air space between the inner and outer wall on FasNSeal W2 helps to reduce the clearance to combustibles in addition to creating a heat shield for additional safety. All FasNSeal components which come in contact with exhaust gases and condensates are now silicone free. This important design and manufacturing feature greatly reduces the chances of system breakdown and failure. The main problems with silicone are there are too many adhesion factors which are very difficult to control and the process of binding similar materials with an epoxy, which can weaken the bond over time. Welded seams ensure a leak-free product that is meant to last.
DuraVent® FasNSeal® Special Gas Vent Pipe, Single Wall, 3 in Dia, 6 in Length, Stainless Steel
All FasNSeal (single-wall) vent lengths and components feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90 deg from mechanical locking bands. This construction feature allows for ease of installation. The 1/2 in air space between the inner and outer wall on FasNSeal W2 helps to reduce the clearance to combustibles in addition to creating a heat shield for additional safety. All FasNSeal components which come in contact with exhaust gases and condensates are now silicone free. This important design and manufacturing feature greatly reduces the chances of system breakdown and failure. The main problems with silicone are there are too many adhesion factors which are very difficult to control and the process of binding similar materials with an epoxy, which can weaken the bond over time. Welded seams ensure a leak-free product that is meant to last.
DuraVent® FasNSeal® Special Gas Vent Pipe, Single Wall, 3 in Dia, 18 in Length, Stainless Steel
Hart and Cooley model TLC All Fuel Chimney offers current technology in a factory built chimney design by providing
superior performance, durability and safety. Model TLC is extremely corrosion resistant. Both the inner liner and outer casings
are constructed of type 304 stainless steel. Embossed couplers do not allow moisture to penetrate the chimney's outer wall.
Sections simply twist lock together and are secured with Locking Bands. The Model TLC product line features deluxe chimney
support components that will enhance any installation. Black trims are used to embellish the chimney support component parts
that may be installed inside the home. All Model TLC supports are designed to carry four times the UL listed weight of the listed
height. Model TLC is safety tested and listed to applicable UL safety standards for chimneys serving solid fuel and liquid fuel
appliances. This includes UL 103. This chimney system is designed for use on appliances that use solid, liquid or gas fuels
under natural draft conditions.
Features
All fuel for use with oil, gas or wood burning appliances
Includes a locking band
The outside diameter is 2" larger than the inside diameter
The assembled length is the total length less 1-1/4" overlap
Type HT 5" to 8" allowable flue gas temperatures:
Maximum continuous: 1000 degrees - Brief forced firing (1 hour): 1400 degrees - Creosote burn out (10 minutes): 2100 degrees
Type NON-HT 10" to 14" allowable flue gas temperatures:
Maximum continuous: 1000 degrees - Brief forced firing (1 hour): 1400 degrees - Creosote burn out (10 minutes): 1700 degrees
Embossed coupler prevents moisture penetration
Mineral wool insulation is augered in for better insulation value and to keep the outside pipe temperatures low for safety while the
inside temperatures remain high for performance
Twist lock connection for easy assembly
The chimney must extend at least 3' above the highest point where it passes through the roof surface, and at least 2' higher than
any part of the building within a horizontal distance of 10'
Hart and Cooley model TLC All Fuel Chimney offers current technology in a factory built chimney design by providing
superior performance, durability and safety. Model TLC is extremely corrosion resistant. Both the inner liner and outer casings
are constructed of type 304 stainless steel. Embossed couplers do not allow moisture to penetrate the chimney's outer wall.
Sections simply twist lock together and are secured with Locking Bands. The Model TLC product line features deluxe chimney
support components that will enhance any installation. Black trims are used to embellish the chimney support component parts
that may be installed inside the home. All Model TLC supports are designed to carry four times the UL listed weight of the listed
height. Model TLC is safety tested and listed to applicable UL safety standards for chimneys serving solid fuel and liquid fuel
appliances. This includes UL 103. This chimney system is designed for use on appliances that use solid, liquid or gas fuels
under natural draft conditions.
Features
All fuel for use with oil, gas or wood burning appliances
Includes a locking band
The outside diameter is 2" larger than the inside diameter
The assembled length is the total length less 1-1/8" overlap
Type HT 5" to 8" allowable flue gas temperatures:
Maximum continuous: 1000 degrees - Brief forced firing (1 hour): 1400 degrees - Creosote burn out (10 minutes): 2100 degrees
Type NON-HT 10" to 14" allowable flue gas temperatures:
Maximum continuous: 1000 degrees - Brief forced firing (1 hour): 1400 degrees - Creosote burn out (10 minutes): 1700 degrees
Embossed coupler prevents moisture penetration
Mineral wool insulation is augered in for better insulation value and to keep the outside pipe temperatures low for safety while the
inside temperatures remain high for performance
Twist lock connection for easy assembly
The chimney must extend at least 3' above the highest point where it passes through the roof surface, and at least 2' higher than
any part of the building within a horizontal distance of 10'
The Hart & Cooley double wall, air insulated B Vent system is secured by locking joints. Properly installed, the
vent won't come apart through vibration, and offers protection against vent failure or fire hazard. Type B Gas Vent
is designed for negative pressure applications and flue gas temperatures not exceeding 400 Degrees above ambient for
Category I appliances. By using high quality materials and skilled workmanship, the galvanized outer pipe and aluminum
inner pipe provide protection against corrosion and external damage. Hart & Cooley's simple two step engagement helps
installers achieve installation quickly and easily. Simply engage pipe sections and secure by sliding the lock ring over
security tabs. This unique system creates a strong connection without the use of screws. With our complete offering of
fittings, supports, and caps, Hart & Cooley B Vent is your most valuable teammate to complete any installation.
Features
The length is adjustable from 1" to 16" longer
The assembled length is the total length less 1-3/8" overlap
The outside diameter is the size plus 1"
The inner and outer ends of the pipe are curled together as an integral unit
Reinforced ends: curled bead on end of outer pipe provides rigidity and strength
Deep locking groove assures a solid joint and secure lock
Positive stop provides proper alignment and positive fit for mating end of pipe
The Hart & Cooley double wall, air insulated B Vent system is secured by locking joints. Properly installed, the
vent won't come apart through vibration, and offers protection against vent failure or fire hazard. Type B Gas Vent
is designed for negative pressure applications and flue gas temperatures not exceeding 400 Degrees above ambient for
Category I appliances. By using high quality materials and skilled workmanship, the galvanized outer pipe and aluminum
inner pipe provide protection against corrosion and external damage. Hart & Cooley's simple two step engagement helps
installers achieve installation quickly and easily. Simply engage pipe sections and secure by sliding the lock ring over
security tabs. This unique system creates a strong connection without the use of screws. With our complete offering of
fittings, supports, and caps, Hart & Cooley B Vent is your most valuable teammate to complete any installation.
Features
The assembled length is the total length less 1" overlap
The outside diameter is the size plus 1"
The inner and outer ends of the pipe are curled together as an integral unit
Reinforced ends: curled bead on end of outer pipe provides rigidity and strength
Deep locking groove assures a solid joint and secure lock
Positive stop provides proper alignment and positive fit for mating end of pipe
Hart and Cooley model TLC All Fuel Chimney offers current technology in a factory built chimney design by providing
superior performance, durability and safety. Model TLC is extremely corrosion resistant. Both the inner liner and outer casings
are constructed of type 304 stainless steel. Embossed couplers do not allow moisture to penetrate the chimney's outer wall.
Sections simply twist lock together and are secured with Locking Bands. The Model TLC product line features deluxe chimney
support components that will enhance any installation. Black trims are used to embellish the chimney support component parts
that may be installed inside the home. All Model TLC supports are designed to carry four times the UL listed weight of the listed
height. Model TLC is safety tested and listed to applicable UL safety standards for chimneys serving solid fuel and liquid fuel
appliances. This includes UL 103. This chimney system is designed for use on appliances that use solid, liquid or gas fuels
under natural draft conditions.
Features
All fuel for use with oil, gas or wood burning appliances
Includes a locking band
The outside diameter is 2" larger than the inside diameter
The assembled length is the total length less 1-1/4" overlap
Type HT 5" to 8" allowable flue gas temperatures:
Maximum continuous: 1000 degrees - Brief forced firing (1 hour): 1400 degrees - Creosote burn out (10 minutes): 2100 degrees
Type NON-HT 10" to 14" allowable flue gas temperatures:
Maximum continuous: 1000 degrees - Brief forced firing (1 hour): 1400 degrees - Creosote burn out (10 minutes): 1700 degrees
Embossed coupler prevents moisture penetration
Mineral wool insulation is augered in for better insulation value and to keep the outside pipe temperatures low for safety while the
inside temperatures remain high for performance
Twist lock connection for easy assembly
The chimney must extend at least 3' above the highest point where it passes through the roof surface, and at least 2' higher than
any part of the building within a horizontal distance of 10'
Welcome back.
Your orders, invoices, and account tools are ready when you are.
