Zone Manifolds 76
For use with PureFlow Pex, FostaPEX, or ViegaPEX Barrier tubing - Must be used with lock clip number 58075
For use with PureFlow Pex, FostaPEX, or ViegaPEX Barrier tubing - Must be used with lock clip number 58075
Old Number 15906
Stainless manifolds are to be used in closed loop hydronic heating, cooling and snow melting system. These preassembled 1-1/4" diameter stainless supply and return manifolds come attached to two 6-5/8" spacing brackets for compact remote mounting. This stainless manifold provides shut off and balancing valves for each circuit. Manifolds used with flow rates up to 2 gpm per circuit, maximum of 18 gpm per manifold. The air bleeder and purge valve are connected and factory tested. 1-1/4" Union connection, 1" NPT removable end caps. SVC Circuit connection fittings are sold separately.
Overview
The EP Heating Manifold Assemblies feature isolation valves and balancing valves with flow meters, and come fully assembled, ready for installation. The manifolds are available in 2- through 8-loop configurations with a maximum flow of 15.4 gpm. The body ends feature R32 unions and the loop outlets have R20 male threads. The manifold mounts on a bracket (A2670006) that comes with the assembly.
For use as a hub in a boiler room - 1-1/4 inch main run with three 3/4 inch male zone connections - 7 inch space between zone connections - Thread protectors on all outlets
For use as zone manifold, radiant manifold, return manifold and boiler headers in a boiler room - 1 inch sweat 6 foot long main run with eighteen 3/4 inch sweat zone connections - Zone connections are on 4 inch centers - Type "L" copper tubing
For use as a hub in a boiler room - 1-1/2 inch main run with six 3/4 inch male zone connections - 7 inch space between zone connections - Thread protectors on all outlets
For use as a hub in a boiler room - 1-1/4 inch main run with three 1 inch male zone connections - 7 inch space between zone connections - Thread protectors on all outlets
For use as a hub in a boiler room - 1-1/4 inch main run with two 3/4 inch male zone connections - 7 inch space between zone connections - Thread protectors on all outlets
For use as a hub in a boiler room - 1-1/4 inch main run with four 3/4 inch male zone connections - 7 inch space between zone connections - Thread protectors on all outlets
For use as a hub in a boiler room - 1-1/4 inch main run with four 1 inch male zone connections - 6 inch space between zone connections - Thread protectors on all outlets
Overview
The EP Heating Manifold Assemblies feature isolation valves and balancing valves with flow meters, and come fully assembled, ready for installation. The manifolds are available in 2- through 8-loop configurations with a maximum flow of 15.4 gpm. The body ends feature R32 unions and the loop outlets have R20 male threads. The manifold mounts on a bracket (A2670006) that comes with the assembly.
For use as a hub in a boiler room - 1-1/4 inch main run with two 1 inch male zone connections - 7 inch space between zone connections - Thread protectors on all outlets
For use as a hub in a boiler room - 2 inch main run with six 1-1/4 inch male zone connections - 7 inch space between zone connections - Thread protectors on all outlets
Overview
The EP Heating Manifold Assemblies feature isolation valves and balancing valves with flow meters, and come fully assembled, ready for installation. The manifolds are available in 2- through 8-loop configurations with a maximum flow of 15.4 gpm. The body ends feature R32 unions and the loop outlets have R20 male threads. The manifold mounts on a bracket (A2670006) that comes with the assembly.
For use as a hub in a boiler room - 2 inch main run with six 1 inch male zone connections - 7 inch space between zone connections - Thread protectors on all outlets
For use with PureFlow Pex, FostaPEX, or ViegaPEX Barrier tubing - Must be used with lock clip number 58075
Overview
The EP Heating Manifold Assemblies feature isolation valves and balancing valves with flow meters, and come fully assembled, ready for installation. The manifolds are available in 2- through 8-loop configurations with a maximum flow of 15.4 gpm. The body ends feature R32 unions and the loop outlets have R20 male threads. The manifold mounts on a bracket (A2670006) that comes with the assembly.
Not for potable water - For sweat system piping - For boilers with external circulators - Includes: 1 - hot and cold double boiler drain manifold, and 2 - rigid copper supply lines with 1 inch female fitting
Overview
The recessed-style manifold wall cabinets feature a removable door-trim package and are adjustable to accommodate stainless-steel, brass or EP manifolds mounted in either a 2x4 or 2x6 stud wall. Mount an Uponor zone control module or wireless zoning base unit inside the cabinet for ease of wiring and protection from exposure or possible damage.Note: When recessing the cabinet in a wall, add 1/2" to the height and width of the cabinet dimensions (shown in the part description) for easier installation. The adjustable door will cover the additional space surrounding the cabinet.
Old Number 15900
Stainless manifolds are to be used in closed loop hydronic heating, cooling and snow melting system. These preassembled 1-1/4" diameter stainless supply and return manifolds come attached to two 6-5/8" spacing brackets for compact remote mounting. This stainless manifold provides shut off and balancing valves for each circuit. Manifolds used with flow rates up to 2 gpm per circuit, maximum of 18 gpm per manifold. The air bleeder and purge valve are connected and factory tested. 1-1/4" Union connection, 1" NPT removable end caps. SVC Circuit connection fittings are sold separately.
For use as a hub in a boiler room - 1 inch main run with three 3/4 inch male zone connections - 7 inch space between zone connections - Thread protectors on all outlets
Old Number 15901
For use in closed loop hydronic heating, cooling and snow melting system. These preassembled 1-1/4" diameter stainless supply and return manifolds come attached to two 6-5/8" spacing brackets for compact remote mounting. This stainless manifold provides shut off and balancing valves for each circuit. Manifolds used with flow rates up to 2 gpm per circuit, maximum of 18 gpm per manifold
For use as a hub in a boiler room - 1-1/2 inch main run with three 1 inch male zone connections - 7 inch space between zone connections - Thread protectors on all outlets
For use as a hub in a boiler room - 1 inch main run with two 3/4 inch male zone connections - 7 inch space between zone connections - Thread protectors on all outlets
Old Number 15902
Stainless manifolds are to be used in closed loop hydronic heating, cooling and snow melting system. These preassembled 1-1/4" diameter stainless supply and return manifolds come attached to two 6-5/8" spacing brackets for compact remote mounting. This stainless manifold provides shut off and balancing valves for each circuit. Manifolds used with flow rates up to 2 gpm per circuit, maximum of 18 gpm per manifold. The air bleeder and purge valve are connected and factory tested. 1-1/4" Union connection, 1" NPT removable end caps. SVC Circuit connection fittings are sold separately.
Old Number 15908
Stainless manifolds are to be used in closed loop hydronic heating, cooling and snow melting system. These preassembled 1-1/4" diameter stainless supply and return manifolds come attached to two 6-5/8" spacing brackets for compact remote mounting. This stainless manifold provides shut off and balancing valves for each circuit. Manifolds used with flow rates up to 2 gpm per circuit, maximum of 18 gpm per manifold. The air bleeder and purge valve are connected and factory tested. 1-1/4" Union connection, 1" NPT removable end caps. SVC Circuit connection fittings are sold separately.
For use as zone manifold, radiant manifold, return manifold and boiler headers in a boiler room - 1 inch sweat 6 foot long main run with twenty four 1/2 inch sweat zone connections - Zone connections are on 3 inch centers - Type "K" copper tubing
For use in heating, cooling, and snow melt applications - Includes branch shutoff valves - 45 gallon per minute - Type L copper tubing
For use in heating, cooling, and snow melt applications - Includes branch shutoff / balancing valves - 45 gallon per minute - Type L copper tubing