The Ultra Series U97V is part of a new line of Ruud smart heating and cooling products. Using the latest in sensor technology and a powerful EcoNet
monitoring system, Ruud provides homeowners with a new level of protection, control and energy savings. Ruud smart heating and cooling products
will alert the homeowner if there is ever an issue via the EcoNet Smart Thermostat 1 and the EcoNet Mobile app. The EcoNet Mobile App makes it easy
for homeowners to manage their home comfort environment at home or on the go, while enjoying the convenience and savings benefits of a highly
efficient system.
Features
This is a multiposition furnace: Downflow or horizontal
Pre-painted galvanized steel cabinet
Can be converted to LP with an LP conversion kit (not included)
Up to 5 tons of air conditioning can be added to this furnace
Removable heat exchanger is constructed of aluminized steel primary, and stainless steel secondary for maximum corrosion resistance
Plus One diagnostics include a 7 segment LED
Plus One ignition system is DSI for reliability and longevity
Plus One water management system with blocked drain sensor
This furnace is EcoNet enabled
When used with an EcoNet control center modulating thermostat, modulation rate is between 40% and 100% of total capacity
When used with a two stage thermostat, the furnace operates between 40% and 65% on the first stage, then 100% on the second stage
When used with a single stage thermostat, the furnace functions as a three stage furnace, operating at 40%, 65% and 100% of total capacity
Pre-marked hoses insure proper system drainage
Vent with 2 inch or 3 inch PVC
Replaceable collector box
Variable speed ECM motor
Integrated control boards feature dip switches for easy system set up
The Ruud RHMV EcoNet enabled air handler is equipped with an electronic expansion valve (EEV), which can intelligently change the
EEV position based on system demands. By the measurement of the suction pressure via the vapor line pressure transducer (factory
installed) and the vapor line thermistor (field connected to the vapor line, but factory provided within the air handler) the EcoNet enabled air
handler control calculates the suction superheat at the indoor coil. This calculation permits the air handler control to make decisions for when
to open and close the EEV for the purpose of maintaining a predetermined suction superheat. The EEV is equipped with a 4 pole removable
external stator, and inlet and outlet chatleff fittings for optimal serviceability. These valves also have an internal check valve to provide heat
pump compatibility. When operating in heating mode, the air handler control will open the EEV completely to permit the check valve to operate
and maximize reverse refrigerant flow.
Features
This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
Can be used with air conditioning or heat pumps
Modulating air flow
Supply dimensions: 10-5/16 inches front to back - 19-1/2 inches side to side - Supply duct flanges are standard
Return dimensions: 19-3/4 inches front to back - 19-3/8 inches side to side
EcoNet controls
The most compact unit design available
Pre-painted rugged steel cabinet
1 inch foil faced insulation mechanically retained in blower cabinet
Four leg blower motor
Slide out blower housing with motor, blower and controls for service and maintenance convenience
Top, left or right side electrical connections
Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
Molded polymer, corrosion resistant condensate drain pan
Coils utilize chatleff metering devices
High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
Up to 4 tons of air conditioning can be added to this unit
If .50 gallon nozzle is used, input is 70,000 BTU's and output is 60,000 BTU's - If .75 gallon nozzle is used, input is 105,000 BTU's and output is 89,000 BTU's
Can be configured to highboy, horizontal left, or horizontal right - Front or rear flue - 3 firing rates - Quick disconnect burner harness - Control board works with PSC and ECM
3 pass heat exchanger - 2 large accessible clean out posts - Standard Honeywell controls - Barometric draft control - Includes filter rack
Enables remote operation from the EcoNet App on Apple mobile devices using iOS version 7.0 or later - Enables remote
operation from the EcoNet App on Android based smart phones or tablets using Android version 4.4 or later - Works with any HVAC
system which includes an EcoNet enabled furnace or air handler and an EcoNet control center
Up to 4 tons of air conditioning can be added to this unit
Can be configured to highboy, horizontal left, or horizontal right - Front or rear flue - 3 firing rates - Quick disconnect burner harness - Control board works with PSC and ECM
3 pass heat exchanger - 2 large accessible clean out posts - Standard Honeywell controls - Barometric draft control - Includes filter rack
The Ruud RW1T hydronic air handler with an ECM motor, features a hydronic heating coil in place of either electric heating elements or
gas fired heat exchangers. When in heating mode, the hydro pump circulates hot water between the tankless water heater (not included) or
boiler (not included) and the hydronic coil.
Features
This unit does not include an air conditioning coil - If air conditioning is required, a 3 ton cased coil must be purchased separately
60,000 BTU heating capacity
This is a multiposition air handler shipped as an upflow unit, but convertible to downflow, horizontal right or horizontal left
Supply dimensions: 20 inches front to back - 16-1/2 inches side to side - Supply duct flanges are standard
Return dimensions: 20 inches front to back - 16-1/2 inches side to side
Low profile design is lighter and easier to handle while also leaving room for an optional cased coil
Pre-painted galvanized steel cabinet
Insulated blower compartment
Integrated control board features diagnostics and manages all operational functions while providing hookups for a humidifier and an
electronic air cleaner
Left or right side electrical connections
Molded, permanent air filter
Transformer and control fuse protection
Standard solid bottom
Stainless steel circulator pump
Front 3/4 inch sweat inlet and outlet water connections
Ruud Indoor Furnace cased coils and replacement uncased coils are designed for use with Ruud outdoor units and are available for vertical upflow or
downflow, and horizontal left or horizontal right airflow.
Features
This is a multiposition coil
This coil uses an EEV metering device
Plenum dimensions: 19-7/8 inches front to back - 20 inches side to side - Flanges are provided for field installation
Can be used on gas or oil furnaces, but cannot be used on 14 wide oil furnaces and cannot be installed as horizontal left application on
any oil furnace
Coils are tested at the factory with an extensive refrigerant leak check
Constructed of aluminum fins bonded to internally grooved aluminum tubing
Copper sweat refrigerant connections
Coils feature two sets of 3/4 inch condensate drain connections for ease of connection
Unique drain pan design maximizes application flexibility and condensate removal
Chatleff metering device connections at inlet and outlet of EEV and equalizer connection
Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal set material
Compatible with Germicidal UV Resistant Light System
Bi-directional air flow eliminates the need to switch any internal components from horizontal left to right
Welcome back.
Your orders, invoices, and account tools are ready when you are.
