Search results for
All Products
Relevant Product Categories
Power open - Power Close
Overview
Ruud Ultra Series Indoor Coils are designed for use with Ruud outdoor units and are available for vertical upflow, horizontal left or horizontal right airflow.
Features
- This is an upflow or horizontal coil that can be used on air conditioning systems or heat pumps
- Plenum dimensions: 19-7/8 inches front to back - 23-1/2 inches side to side
- Can be used on gas or oil furnaces, but cannot be used on 14 wide oil furnaces
- Coils are tested at the factory with an extensive refrigerant leak check
- Constructed of aluminum fins bonded to intergrooved copper tubing
- Copper sweat refrigerant connections
- Coils have 3/4 inch condensate drain connections for ease of connection
- Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal set material
- Compatible with Germicidal UV Resistant Light System
Overview
All RGEA models feature Scroll compressors for maximum efficiency and quiet operation. This gas / electric package unit features a factory installed tubular stainless steel heat exchanger
Features
- This unit is shipped ready for horizontal installation, but can be converted to side or down discharge
- Scroll compressor for maximum efficiency and quiet operation
- Louvered condenser compartment to protect the coil against yard hazards and weather extremes
- One piece top with a drip flange to help keep water out of the unit
- Supply and return air openings feature a one inch tall flange to prevent water migration into the ductwork
- Access panels have weep holes and channels to further help manage water run off
- Easily accessible blower section complete with a slide out blower
- Conviently located refrigerant connections
- Micro Channel evaporator and condenser delivers superior performance with less refrigerant charge and less weight than conventional copper tube / aluminum fin coils. In addition the all aluminum construction has superior protection against formicary corrosion and aluminum tube rubbing potential. It is easier to clean and has a more robust surface.
- Inside the easily accessible furnace compartment is the draft inducer motor. This motor is specially designed for quiet reliable operation. In addition to the draft inducer motor, the in-shot gas burners and manifold efficiently regulate the flow of gas for combustion. These gas / electric units also feature direct spark ignition and remote flame sensors for added reliability and efficiency
- Easily accessible control box
- Tubular stainless steel heat exchanger
- Standard filter drier
- Rugged base rail is standard equipment
- Molded compressor plugs
- A double sloped evaporator coil drain pan assures all water is removed from the unit to improve indoor air quality.
The Concentric Curb Transition is designed to drop into the curb and convert the square duct unit connections to round duct. For use with both (-)XKG roof curbs. Supply and return duct openings are: 20 inch oval or 21 inch x 17-1/2 inch rectangle
Overview
The Ruud RH1V High Efficiency Air Handler is performance measured across 13 active monitoring points that deliver sustained comfort and maximum efficiency. Reducing your monthly energy bills is easier than ever because the Ruud RH1V Air Handler features a high efficiency, variable speed blower motor that is recognized by the industry for dependable energy savings. Solid construction ensures quiet operation and provides quality assurance
Features
- This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
- Can be used with air conditioning
- Single stage air flow
- Supply dimensions: 10-5/16 inches front to back - 19-1/2 inches side to side - Supply duct flanges are standard
- Return dimensions: 19-3/4 inches front to back - 19-3/8 inches side to side
- The most compact unit design available
- Pre-painted rugged steel cabinet
- 1 inch foil faced insulation mechanically retained in blower cabinet
- Four leg rubber insulated blower motor
- Slide out blower housing with motor, blower and controls for service and maintenance convenience
- Top, left or right side electrical connections
- Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
- Molded polymer, corrosion resistant condensate drain pan
- Coils utilize chatleff metering devices
- High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
- Front refrigerant and drain connections
Overview
The Ruud RH1V High Efficiency Air Handler is performance measured across 13 active monitoring points that deliver sustained comfort and maximum efficiency. Reducing your monthly energy bills is easier than ever because the Ruud RH1V Air Handler features a high efficiency, variable speed blower motor that is recognized by the industry for dependable energy savings. Solid construction ensures quiet operation and provides quality assurance
Features
- This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
- Can be used with air conditioning
- Single stage air flow
- Supply dimensions: 10-5/16 inches front to back - 19-1/2 inches side to side - Supply duct flanges are standard
- Return dimensions: 19-3/4 inches front to back - 19-3/8 inches side to side
- The most compact unit design available
- Pre-painted rugged steel cabinet
- 1 inch foil faced insulation mechanically retained in blower cabinet
- Four leg rubber insulated blower motor
- Slide out blower housing with motor, blower and controls for service and maintenance convenience
- Top, left or right side electrical connections
- Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
- Molded polymer, corrosion resistant condensate drain pan
- Coils utilize chatleff metering devices
- High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
- Front refrigerant and drain connections
Overview
The Ruud RH1V High Efficiency Air Handler is performance measured across 13 active monitoring points that deliver sustained comfort and maximum efficiency. Reducing your monthly energy bills is easier than ever because the Ruud RH1V Air Handler features a high efficiency, variable speed blower motor that is recognized by the industry for dependable energy savings. Solid construction ensures quiet operation and provides quality assurance
Features
- This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
- Can be used with air conditioning
- Single stage air flow
- Supply dimensions: 10-5/16 inches front to back - 23 inches side to side - Supply duct flanges are standard
- Return dimensions: 19-3/4 inches front to back - 22-7/8 inches side to side
- The most compact unit design available
- Pre-painted rugged steel cabinet
- 1 inch foil faced insulation mechanically retained in blower cabinet
- Four leg rubber insulated blower motor
- Slide out blower housing with motor, blower and controls for service and maintenance convenience
- Top, left or right side electrical connections
- Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
- Molded polymer, corrosion resistant condensate drain pan
- Coils utilize chatleff metering devices
- High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
- Front refrigerant and drain connections
Overview
The Ruud RH1V High Efficiency Air Handler is performance measured across 13 active monitoring points that deliver sustained comfort and maximum efficiency. Reducing your monthly energy bills is easier than ever because the Ruud RH1V Air Handler features a high efficiency, variable speed blower motor that is recognized by the industry for dependable energy savings. Solid construction ensures quiet operation and provides quality assurance
Features
- This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
- Can be used with air conditioning
- Single stage air flow
- Supply dimensions: 10-5/16 inches front to back - 19-1/2 inches side to side - Supply duct flanges are standard
- Return dimensions: 19-3/4 inches front to back - 19-3/8 inches side to side
- The most compact unit design available
- Pre-painted rugged steel cabinet
- 1 inch foil faced insulation mechanically retained in blower cabinet
- Four leg rubber insulated blower motor
- Slide out blower housing with motor, blower and controls for service and maintenance convenience
- Top, left or right side electrical connections
- Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
- Molded polymer, corrosion resistant condensate drain pan
- Coils utilize chatleff metering devices
- High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
- Front refrigerant and drain connections
Overview
The Ruud RH1V High Efficiency Air Handler is performance measured across 13 active monitoring points that deliver sustained comfort and maximum efficiency. Reducing your monthly energy bills is easier than ever because the Ruud RH1V Air Handler features a high efficiency, variable speed blower motor that is recognized by the industry for dependable energy savings. Solid construction ensures quiet operation and provides quality assurance
Features
- This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
- Can be used with air conditioning
- Single stage air flow
- Supply dimensions: 10-5/16 inches front to back - 19-1/2 inches side to side - Supply duct flanges are standard
- Return dimensions: 19-3/4 inches front to back - 19-3/8 inches side to side
- The most compact unit design available
- Pre-painted rugged steel cabinet
- 1 inch foil faced insulation mechanically retained in blower cabinet
- Four leg rubber insulated blower motor
- Slide out blower housing with motor, blower and controls for service and maintenance convenience
- Top, left or right side electrical connections
- Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
- Molded polymer, corrosion resistant condensate drain pan
- Coils utilize chatleff metering devices
- High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
- Front refrigerant and drain connections
Overview
The Ruud RH1V High Efficiency Air Handler is performance measured across 13 active monitoring points that deliver sustained comfort and maximum efficiency. Reducing your monthly energy bills is easier than ever because the Ruud RH1V Air Handler features a high efficiency, variable speed blower motor that is recognized by the industry for dependable energy savings. Solid construction ensures quiet operation and provides quality assurance
Features
- This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
- Can be used with air conditioning
- Single stage air flow
- Supply dimensions: 10-5/16 inches front to back - 19-1/2 inches side to side - Supply duct flanges are standard
- Return dimensions: 19-3/4 inches front to back - 19-3/8 inches side to side
- The most compact unit design available
- Pre-painted rugged steel cabinet
- 1 inch foil faced insulation mechanically retained in blower cabinet
- Four leg rubber insulated blower motor
- Slide out blower housing with motor, blower and controls for service and maintenance convenience
- Top, left or right side electrical connections
- Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
- Molded polymer, corrosion resistant condensate drain pan
- Coils utilize chatleff metering devices
- High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
- Front refrigerant and drain connections
Overview
The Ruud RH1V High Efficiency Air Handler is performance measured across 13 active monitoring points that deliver sustained comfort and maximum efficiency. Reducing your monthly energy bills is easier than ever because the Ruud RH1V Air Handler features a high efficiency, variable speed blower motor that is recognized by the industry for dependable energy savings. Solid construction ensures quiet operation and provides quality assurance
Features
- This is a multiposition air handler: Upflow, downflow, horizontal right or horizontal left
- Can be used with air conditioning
- Single stage air flow
- Supply dimensions: 10-5/16 inches front to back - 16 inches side to side - Supply duct flanges are standard
- Return dimensions: 19-3/4 inches front to back - 15-7/8 inches side to side
- The most compact unit design available
- Pre-painted rugged steel cabinet
- 1 inch foil faced insulation mechanically retained in blower cabinet
- Four leg rubber insulated blower motor
- Slide out blower housing with motor, blower and controls for service and maintenance convenience
- Top, left or right side electrical connections
- Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
- Molded polymer, corrosion resistant condensate drain pan
- Coils utilize chatleff metering devices
- High voltage connections are on the inside of the cabinet - Low voltage connections are on the outside of the cabinet
- Front refrigerant and drain connections
Overview
Introducing the Ruud Commercial Renaissance Line Achiever. This commercial package is the result of years of research and development, creative engineering and innovation. Made with smart new features and exclusive PlusOne advantages, all delivered with world renowned performance and reliability, the Renaissance Line Achiever is a signature piece in the growing portfolio of industry leading, Ruud commercial HVAC solutions.
Features
- This is a convertible airflow air conditioner package; vertical down flow or horizontal side flow
- 1 single stage Scroll compressor for maximum efficiency and quiet operation
- TXV refrigerant metering system
- One piece top cover and one piece base pan with drawn supply and return opening
- Solid core liquid line filter drier
- MicroChannel evaporator and condenser coil
- PlusOne diagnostics with dual 7 segment LED display to meet code compliance
- PlusOne ServiceSmart package includes: Qwik change flex fit rack, Qwik slide blower assembly, and Qwik clean drain pan
- Externally mounted, lockable refrigerant gauge ports
- High pressure and low pressure / loss of charge protection with built in Smart Logic
- Color coded and labeled wiring
- Forkable base rails for easy handling and lifting
- Overflow condensate sensor
- Two piece control door
For use with Ruud gas furnaces when installing in a downflow application on combustible materials. Fits 21 inch wide furnace cabinets.
Overview
Introducing the Ruud Commercial Renaissance Line Achiever Plus. This commercial package is the result of years of research and development, creative engineering and innovation. Made with smart new features and exclusive PlusOne advantages, all delivered with world renowned performance and reliability, the Renaissance Line Achiever Plus is a signature piece in the growing portfolio of industry leading, Ruud commercial HVAC solutions.
Features
- This is a convertible airflow air conditioner package; vertical down flow or horizontal side flow
- 1 two stage Scroll compressor for maximum efficiency and quiet operation
- ClearControl includes: Rooftop unit controller, temperature sensors, and pressure sensors allowing real time monitoring and communication between rooftop units
- TXV refrigerant metering system
- One piece top cover and one piece base pan with drawn supply and return opening
- Solid core liquid line filter drier
- Hinged access
- MicroChannel evaporator and condenser coil
- PlusOne diagnostics with dual 7 segment LED display to meet code compliance
- PlusOne ServiceSmart package includes: Qwik change flex fit rack, Qwik slide blower assembly, and Qwik clean drain pan
- Externally mounted, lockable refrigerant gauge ports
- High pressure and low pressure / loss of charge protection with built in Smart Logic
- Color coded and labeled wiring
- Forkable base rails for easy handling and lifting
- High performance belt drive motor with variable pitch pulleys and quick adjust belt system
- Overflow condensate sensor
- Non-powered convenience outlet
- Economizer
Coil is constructed of copper tubing with enhanced aluminum fins - Factory installed low pressure control - Strong louvered cabinet - Expansion valve with internal check valve - Demand defrost control - Non-cycling reversing valve - Hot gas muffler - Service valves - Motor is mounted to the grille - Easily accessible control box - Bi-directional filter drier (shipped with unit, but not installed)
