Old Number HC26A-1008
Fits Honeywell HE200, HE250, HE260, HE265, HE300, HE360, HE365 Humidifiers
and Aprilaire 350, 360, 560, 568, 600, 700, 760, 768 Humidifiers
Search results for
All Products
1,080
products found manufactured by Honeywell
Relevant Product Categories
Old Number VR8345H-4555
For use with direct spark ignition, hot surface ignition or intermittent pilot ignition
Includes manual valve, two automatic operators, pressure regulator, pilot adjustment, pilot plug, ignition adapter, two 3/4 inch x 1/2 inch bushings, and an LP conversion kit
Single stage - 24 Volt - Slow Opening - 300,000 BTU per hour at 1 inch water column - 30,000 BTU per hour minimum
Easy to install, adjust and service; all adjustments and connections are accessible from top of control
Clearly marked, keyed terminal block allows quick attachment of wires and IP/DSI/HSI jumper - Internal inlet screen blocks contaminants in gas line from entering valve
Old Number CPRD14
1700 CFM Maximum airflow - This constant pressure regulating damper is a round static pressure relief damper. It is used in
forced air bypass applications to relieve excess static pressure when some of the zone dampers are closed
Can be installed in any orientation
Dual purpose mixing or diverting valve - Teflon wear surfaces - 145 degree maximum temperature
Used for 24 volt intermittent pilot boilers - Solenoid operated first automatic valve opens on thermostat call for heat, and closes when call for heat ends - Diaphragm operated second automatic valve opens under control of regulator and closes if gas or power supply is interrupted - Includes natural gas to LP conversion kit - Includes one 3/4 inch to 1/2 inch bushing
Used for 24 volt intermittent pilot boilers - Solenoid operated first automatic valve opens on thermostat call for heat, and closes when call for heat ends - Diaphragm operated second automatic valve opens under control of regulator and closes if gas or power supply is interrupted - Includes natural gas to LP conversion kit - Includes one 3/4 inch to 1/2 inch bushing
Used for three zones with zone valves, and includes a priority zone control - Compatible with most thermostats - "C" terminal is available for every thermostat connection - LED display panel is visible and functional whether the cover is on or off - Labels are coded to the wire colors
Used for four zones with zone valves, and includes a priority zone control - Compatible with most thermostats - "C" terminal is available for every thermostat connection - LED display panel is visible and functional whether the cover is on or off - Labels are coded to the wire colors
Fits V8043F series zone valves
Old Number V4043A-1259
All models may be installed without disassembling the valve - Compact construction for easy installation - Normally closed - Manual opener
Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
Motor may be replaced without removing the valve body or draining the system
Old Number R845A-1030
Provides intermediate switching of a line voltage device from a low voltage controller
Integral transformer provides low voltage power for control circuit - Double pole, Single throw (DPST) switching
Old Number F200F-2002
Uses 16 inch x 25 inch x 4 inch media - MERV 13 - 1400 CFM maximum air flow capacity
High efficiency media filter captures particles as small as 0.3 microns - Applicable to all gas, oil and electric forced air furnaces
and to compressor cooling up to 5 tons - Mounts in the return air duct - Rugged zinc coated, roll formed cabinet resists corrosion
and can support weight of residential furnace and evaporator coil - Requires no electrical connections - Mounts in any position
Requires no maintenance except periodic media filter replacement - Quick and easy media filter replacement
Later upgrade to higher performing media or electronic air cleaner is easy
Old Number 203372
Fits F50A and F50E - Contains 1 - 20 x 25 Filter and 1 - 20 x 12-1/2 Filter
Old Number ZD24X12TZ
Power close and spring open damper - 24 volt motor used to control circulating air in HVAC systems and used when a normally open damper is required.
Mechanical visual position indicator for damper status - Solid construction using extruded aluminum frame and blades
Parallel blade design for low leakage performance - Simple, easy to wire, two wire installation - Reliable, strong, 24 volt spring return motor
Fail safe, normally open operation
Old Number ZD22X10TZ
Power close and spring open damper - 24 volt motor used to control circulating air in HVAC systems and used when a normally open damper is required.
Mechanical visual position indicator for damper status - Solid construction using extruded aluminum frame and blades
Parallel blade design for low leakage performance - Simple, easy to wire, two wire installation - Reliable, strong, 24 volt spring return motor
Fail safe, normally open operation
Old Number ZD10X22TZ
Power close and spring open damper - 24 volt motor used to control circulating air in HVAC systems and used when a normally open damper is required.
Mechanical visual position indicator for damper status - Solid construction using extruded aluminum frame and blades
Parallel blade design for low leakage performance - Simple, easy to wire, two wire installation - Reliable, strong, 24-volt spring return motor.
Fail safe, normally open operation
Includes one THM5421R-1021/U equipment interface module and two duct sensors
Controls up to 3 stages of heat and 2 stages of cool in a conventional system - 4 stages of heat and 2 stages of cool in a heat pump system - Three sets of Universal IAQ contacts to control humidification, dehumidification, and ventilation - Four sensor inputs for wired sensors or dry contact devices
Used with all THX9421R-5021/U Prestige 2 Wire IAQ Thermostats, all versions of Prestige IAQ Thermostats, and the VisionPRO thermostats with RedLINK technology
Old Number HE100A-1000
Includes HumidiPRO digital humidity control
Easy to install with quick snap bypass direction adjustment - Easy to replace pads - Versatile fit designed for more jobs.
Fast installation for labor and time savings - Operational noise reduction for humidity comfort without the ear aches
Old Number R8184G-4066
Provides automatic, non-recycling control of an intermittent ignition oil burner system.
Controls oil burner, oil valve (if desired) and the ignition transformer in response to a call for heat - Solid state flame sensing circuit.
LED on terminal strip indicates system lockout - 15 second safety lockout - Enclosed safety switch with external reset button.
Manual trip lever opens safety switch for system maintenance - Mounts on standard 4 x 4 inch junction box or directly on the burner
Old Number TRN2121T1
Higher efficiency and lower pressure drop than OEM filter - Captures particles as small as 0.3 microns - Pleated filter for greater media capacityLow pressure drop reduces strain on equipment, provides a comfortable air flow, and helps maintain equipment efficiency.
Easy installation because angled edge fits neatly into offset side of air cleaner frame - MERV 10
Old Number AQ25742B
Allows the addition of 4 zones of 2 wire zone valves to AQ2000 series boiler control panels
Old Number VR8305M-3506
Includes manual valve, two automatic operators, pressure regulator, one 3/4 inch x 1/2 inch bushings, one 3/4 inch straight flange, and an LP conversion kit
Single stage - 24 Volt - Standard Opening - 270,000 BTU per hour at 1 inch water column - 30,000 BTU per hour minimum - 370,000 BTU per hour maximum
Easy to install, adjust and service; all adjustments and connections are accessible from top of control
Provides two automatic valves: Solenoid operated first automatic valve opens on thermostat call for heat, closes when call for heat ends - Diaphragm operated second automatic valve opens under control of regulator and closes if gas or power supply is interrupted
Meets codes requiring dual safety shutoff - Complete safety shutoff on pilot flame failure - ON-OFF lighting sequence
Old Number FR8000A-2020
Fits FH8000A-2020MERV 15
Old Number 50046086-001
Fits Reverse Osmosis Water Filter System
Includes: 1 - Number 1 Sediment Filter, 1 - Number 2 Reverse Osmosis Filter, and 1 - Flow Control Screen
Old Number 32001639-002
Fits HE225 and HE265
Old Number CHW3610W-1001Y
Detector and 4 foot water sensing cable can both detect a water leak
The detector can also detect a pipe freezing incident - 100 decibel alarm
Runs on WiFi; No extra hub or hardware purchase required - Extra cable sensors can be daisy chained to cover up to 500 feet of space with 1 detector
Re-usable after detecting a leak - Comes with 3 AA batteries
Old Number M847D-1004 and M847D-VENT
Two position, 24 Volt spring return actuator
Fits EARD ventilation dampers
Equipped with anti-rotation and drive shaft extensions for direct mounting to 7/16 inch diameter coupling style dampers.
Adjustable range stops.
Old Number ZD8X22TZ
Power close and spring open damper - 24 volt motor used to control circulating air in HVAC systems and used when a normally open damper is required.
Mechanical visual position indicator for damper status - Solid construction using extruded aluminum frame and blades
Parallel blade design for low leakage performance - Simple, easy to wire, two wire installation - Reliable, strong, 24 volt spring return motor
Fail safe, normally open operation
Old Number ZD22X12TZ
Power close and spring open damper - 24 volt motor used to control circulating air in HVAC systems and used when a normally open damper is required.
Mechanical visual position indicator for damper status - Solid construction using extruded aluminum frame and blades
Parallel blade design for low leakage performance - Simple, easy to wire, two wire installation - Reliable, strong, 24 volt spring return motor
Fail safe, normally open operation
Old Number ZD16X14TZ
Power close and spring open damper - 24 volt motor used to control circulating air in HVAC systems and used when a normally open damper is required.
Mechanical visual position indicator for damper status - Solid construction using extruded aluminum frame and blades
Parallel blade design for low leakage performance - Simple, easy to wire, two wire installation - Reliable, strong, 24-volt spring return motor.
Fail safe, normally open operation
Old Number ARD5TZ
Honeywell Automatic Round Damper power-close, spring-open models ensure low leakage while controlling circulating air in heating, cooling and ventilation systems.
Features galvanized steel with single-blade damper, which closes off tightly against gasket for minimal leakage
Can be field-converted when used as an idependent zone or for fresh air intake
Old Number YTH9421C-1010
Includes: one TH9421C-1004/U VisionPRO IAQ Programmable Thermostat one C7089U-1006/U outdoor temperature sensor, and one THM5421C-1008/U Equipment Interface Module
3 heat and 2 cool stages for conventional units - 4 heat and 2 cool stages for heat pumps - Automatic or manual changeover
Humidification control with or without Frost Protection - Dehumidification using whole house dehumidifier or air conditioning with high or low speed fan - Advanced ventilation Control - Advanced dual fuel heat pump control
Old Number TH2110DH-1002
Weekday/Weekend programming - 5-2 (Weekdays, Weekend) programming - Horizontal mounting
Heat pump compatible if no auxillary heat
Backlit digital display - Current and set temperatures are easy to read in various lighting conditions
Precise comfort control maintains consistent comfort to the highest level of accuracy
Basic operation - Easy to use slide switches allow selection of the heat or cool mode, and operate the fan
Manual switchover from heating to cooling - Built in instructions - simple, pull out instruction manual
Adaptive Intelligent Recovery ensures programmed temperature is reached by programmed time
Old Number W8735S-1000
Includes C7089U-1006/U wired outdoor sensor and outdoor reset module
Old Number V8043F-1051
All models may be installed without disassembling the valve - Compact construction for easy installation - Normally closed - Manual opener - Single pole, single throw (SPST) end switch
Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system - Terminal block for wire connections
Motor may be replaced without removing the valve body or draining the system
Old Number AMX101-US-1LF
Operating Temperature from 70 Degrees to 145 Degrees - 3/4 inch Sweat Unions - Teflon Coated, Stainless Steel/Brass Body
Designed to be Directly Installed on Water Heater Outlet Port - EPDM Rubber "O" Rings - Check Valves on Hot and Cold Ports
Old Number R8222B-1067
Provides general purpose heavy duty switching for refrigeration and air conditioning equipment, appliances, vending machines and similar applications
Molded terminal numbers and circuit diagram on top of relay provide easy identification for wiring and checking system operation.
Untaped coil assures cooler operation - Laminated magnet construction for higher efficiency - Single pole, double throw (SPDT) switching
Base designed for easy replacement of competitive relays - Plug compatible with Steveco 90-340 and Mars 90340.
Old Number V8043E-5012
All models may be installed without disassembling the valve - Compact construction for easy installation - Normally closed - Manual opener - Single pole, single throw (SPST) end switch
Quick Fit pushbutton powerhead may be removed or replaced without breaking plumbing line connections or draining the system
Innovative motor technology offers silent operation, water hammer resistance and longer life
Overview
- Old Number 121371L
- 3/8 inch Internal - 1-1/2 inch Insulation Depth
Old Number FC37A-1064
Fits E300E-1035Electronic air cleaner cell consisting of an ionizer section and a collector section