Old Number 50027998-002
Fits TrueSTEAM Humidifiers
Search results for
All Products
1,080
products found manufactured by Honeywell
Relevant Product Categories
Old Number RRD7
Power open, power closed damper actuator is easily inserted into rigid round ducts for retrofit zoning in forced air heating and cooling systems
2.5 VA allows for many dampers on one zone - Quiet, long life motor automatically shuts itself off in full open and closed positions
Gaskets around blade and under motor housing for low internal leakage and very low external leakage
Range stops with easy adjustment from top of motor - Easy to see and reliable mechanical blade position indicator
Hooks up with conventional thermostat wire - Simple manual blade positioning with push button gear release
Old Number R8225A-1017
Provides general purpose switching for refrigeration and air conditioning equipment, appliances, vending machines and similar applications
Molded terminal numbers and circuit diagram on top of relay provide easy identification for wiring and checking system operation.
Untaped coil assures cooler operation - Laminated magnet construction for higher efficiency - Single pole, double throw (SPDT) switching
Base designed for easy replacement of competitive relays - Plug compatible with Steveco 90-340 and Mars 90340.
Old Number TK30PV-125FM
Kits are a quick way to purchase boiler trim when doing a boiler change out
Kit includes: TK300-30/U Expansion tank, PV125/U 1-1/4 inch Supervent, SCV-050/U Service check valve, and FM911/U 1/2 inch boiler fill valve/backflow preventer combination
For use with VR8205S,T; VR8215S,T; VR82/VR8300A,M,H,K; VR82/VR8304A,M,H,K; VR82/VR8305A,M,H,K; VR42/VR4300A,M,H,K; VR42/VR4304A,M,H,K; VR42/VR4305A,M,H,K Standard and Slow opening valves - Not for use with Step valves
Used for closed loop hydronic systems designed for cycling (not constantly powered on) - Motor can be replaced without removing the valve body or draining the system - Two way normally open valve - 24 volts
Normally open - Molded terminal numbers and circuit diagram on top of relay - Untaped coil for cooler operation - Laminated magnet - The base is designed for easy replacement of competitive relays - Double quick connect coil terminals
Includes: Silicon carbide igniter, bracket, screw, 11 inch lead, and wiring accessories to adapt the igniter to the specific appliance application
Wiring Terminal Type: Stripped ends
Connection Type: Stripped ends
Designed to provide a robust field service replacement igniter in gas fired appliances with 120 VAC silicon carbide hot surface igniters
Uses a 120 volt silicon carbide igniter design with long life and high resistance to damage or burn out in the appliance - Natural Gas or LP
Old Number 40003916-021
Fits V8043A - 18 inch Leads
Old Number 394588
Includes: 1 - Regulator Spring, 1 - "O" Ring, 1 - Adjustment Screw, and 1 - Cap Screw
3 inch to 5 inch Adjustment Range
Old Number ZD16X16TZ
Power close and spring open damper - 24 volt motor used to control circulating air in HVAC systems and used when a normally open damper is required.
Mechanical visual position indicator for damper status - Solid construction using extruded aluminum frame and blades
Parallel blade design for low leakage performance - Simple, easy to wire, two wire installation - Reliable, strong, 24-volt spring return motor.
Fail safe, normally open operation
Old Number ZD14X18TZ
Power close and spring open damper - 24 volt motor used to control circulating air in HVAC systems and used when a normally open damper is required.
Mechanical visual position indicator for damper status - Solid construction using extruded aluminum frame and blades
Parallel blade design for low leakage performance - Simple, easy to wire, two wire installation - Reliable, strong, 24-volt spring return motor.
Fail safe, normally open operation
1400 CFM maximum air flow capacity - Captures 98% of particles - Applicable to all gas, oil and electric forced air furnaces and AC systems
Mounts in the return air duct - Rugged zinc coated, roll formed cabinet resists corrosion - Media post filter
Low profile door with test button to check system operation - Very low pressure drop
Old Number HE150A-1005
Includes HumidiPRO digital humidity control - Automatically closes the bypass when not in use
Easy to install with quick snap bypass direction adjustment - Easy to replace pads - Versatile fit designed for more jobs.
Fast installation for labor and time savings - Operational noise reduction for humidity comfort without the ear aches
Old Number Y8835A-1036
Includes: One W8835 Panel, one VisionPRO IAQ Communicating Thermostat, one FocusPRO communicating thermostat, one C7835 Discharge Air Temperature Sensor, one AT140 Transformer, one C7089U Outdoor Temperature Sensor, and one 50022037-001 Outdoor Temperature Interface Module
Old Number 393690-4
Includes: 1 - 3/4 inch Straight Flange, 1 - "O" Ring, 4 - 9/64 inch Hex Screws, and 1 - Dust Plug
Honeywell AQ252 AQUATROL universal injection/mixing boiler reset controls for single temperature, residential hydronic heating systems ensure ample supply of hot water through energy-efficient outdoor temperature compensated control.
Honeywell Aquatrol® Boiler Reset Control Panel, Injection/Mixing, Series: AQ252, User Interface: DIP Switch, 4 Zones, Boiler Output: 24 VAC 0.5 A 12 VA, 38 VA, 10 ft Lead Length, 2 x 14 AWG Wire, Wire-Clamp Screw Terminal, 8 in H x 16-1/2 in W x 3-3/8 in D, Import
Old Number RA832A-1066
Provides intermediate switching of a line voltage device from a low voltage controller - Triple pole, single throw (TPST) switching
One relay pole is designed for low voltage or millivoltage (PowerPile) auxiliary load. Two other relay poles are for line voltage loads
Integral transformer provides low voltage power for control circuit
Old Number REM5000R-1001
Control the temperature from anywhere in the home to experience a new level of comfort and convenience. Works in both zoned and non-zoned applications.
No interference with other wireless devices in the home - Works with compatible RedLINK enabled thermostats and accessories
Installs in minutes - Touchscreen interface with backlit display - Can display outdoor temperature and humidity
Built in pager with an audible noise helps locate the device in the home - Screen lock feature helps prevent accidental changes
1 year battery life - 2 month low battery warning
In Non-Zoned Applications: Bring it with you anywhere in the home to sense and control temperature from the room that you are in
In Zoned Applications: View and adjust all RedLINK enabled thermostats from a single control
Controls up to 16 thermostats
Old Number PV100
1/2 inch FIPS connection size - 1 inch FIPS pipe size
Purges air through a no clog vent assembly, to control dirt and debris and minimize air vent fouling in Hydronic heating systems, while eliminating the need for bleeding.
No clog vent - Dirt and Debris resistant - 360 degree adjustable collar ring for installation flexibility - Stainless steel concentrator which eliminates gurgling noise
Bronze body for rigid construction.
Dual purpose mixing or diverting valve - Teflon wear surfaces - 145 degree maximum temperature
Used for 24 volt direct ignition boilers - Two automatic operators - Pressure regulator - Manual switch - Can be used for LP gas when an LP conversion kit is installed
Used for fresh air intake for ventilation or for combustion makeup air - 24 volts
Used for a single zone with a circulator - Compatible with most thermostats - "C" terminal is available for every thermostat connection - LED display panel is visible and functional whether the cover is on or off - Labels are coded to the wire colors
Dual purpose mixing or diverting valve - 0.5 GPM minimum flow - EPDM "O" rings - 212 degree maximum temperature
Fits FocusPRO TH5110 thermostat - Includes one 4-5/16 inch x 5 inch small cover plate and one 5 inch x 6-7/8 inch medium cover plate
Provides low voltage control of line voltage fan motors and auxiliary circuits - Includes NEMA standard transformer - Mounts on standard 4 inch x 4 inch junction box - Double pole, double throw (DPDT) switch
Includes: W8150A-1001 ventilation controller, AT120B-1028 24 volt transformer, and EARD6TZ TrueZONE damper/actuator - Can be used with an HRV or ERV for balanced ventilation
Old Number T4398A-1021
Provides high performance, precise line voltage control of resistive rated electric heating equipment
Extremely sensitive to temperature changes - Color coded leads allow easy installation - Includes long lasting Micro Switch mechanism.
Rugged plastic mounting base - Cover thermometer indicates room temperature.
Fits V110 valves
Automatic temperature control in two pipe steam or hot water systems for free standing radiators, convectors, and other heating units with standard capacity requirements
Controls include sensor, setpoint dial and valve actuator - Connect to actuator on valve body by 6-1/2 foot capillary tube
Requires no electrical connections.
Old Number RRD8
Power open, power closed damper actuator is easily inserted into rigid round ducts for retrofit zoning in forced air heating and cooling systems
2.5 VA allows for many dampers on one zone - Quiet, long life motor automatically shuts itself off in full open and closed positions
Gaskets around blade and under motor housing for low internal leakage and very low external leakage
Range stops with easy adjustment from top of motor - Easy to see and reliable mechanical blade position indicator
Hooks up with conventional thermostat wire - Simple manual blade positioning with push button gear release
Old Number RA889A-1001
Provides intermediate switching of line and low voltage devices from a line or low voltage controller
High load switching capability - Troubleshooting LED - Push to test button - Replaceable transformer fuse.
Long life DC relay drive control technology - Relay for use with external 24 Volt AC or 24 Volt DC supply, with line voltage control, or with internal 24 V transformer supply.
Secondary of transformer protected by replaceable 1A automotive fuse - Single pole, double throw (SPDT) switching
Includes: Silicon carbide igniter, bracket, screw, 5-5/16 inch lead, and wiring accessories to adapt the igniter to the specific appliance application
Wiring Terminal Type: Amp 1-480699-0 connector housing with .093 inch male pins
Connection Type: Amp 1-480699-0 connector housing with .093 inch male pins
Designed to provide a robust field service replacement igniter in gas fired appliances with 120 VAC silicon carbide hot surface igniters
Uses a 120 volt silicon carbide igniter design with long life and high resistance to damage or burn out in the appliance - Natural Gas or LP
Includes: Silicon carbide igniter, bracket, screw, 5-1/4 inch lead, and wiring accessories to adapt the igniter to the specific appliance application
Wiring Terminal Type: Receptacle with .093 male pins
Connection Type: Receptacle with .093 male pins
Designed to provide a robust field service replacement igniter in gas fired appliances with 120 VAC silicon carbide hot surface igniters
Uses a 120 volt silicon carbide igniter design with long life and high resistance to damage or burn out in the appliance - Natural Gas or LP
Includes: Silicon carbide igniter, bracket, screw, 5-1/2 inch lead, and wiring accessories to adapt the igniter to the specific appliance application
Wiring Terminal Type: Molex internally keyed connector with .084 pins
Connection Type: Molex internally keyed connector with .084 pins
Designed to provide a robust field service replacement igniter in gas fired appliances with 120 VAC silicon carbide hot surface igniters
Uses a 120 volt silicon carbide igniter design with long life and high resistance to damage or burn out in the appliance - Natural Gas or LP
Old Number L8148E-1299
180 to 240 degrees high limit - High limit 15 degree fixed differential - For low volt or millivolt systems
Combines high limit protection with switching relay control of burner and circulator motors - High limit opens burner circuit only
Includes: 50VA transformer and heat conductive compound
Well mount only and in vertical position only
Old Number HM750A-1000
Includes: Humidifier, H6062 Digital humidity control, and HM750ACLY2 cylinder - Wall or duct mounted - 120 or 240 volts
Auto adaptive technology adjusts for changes in the weather, water and voltage - Automatically protects against window condensation and frost
Humidity Boost can be used to increase relative humidity by 5 or 10 percent - Easy to use with any of the control options - When used with
Prestige IAQ and VisionPRO 8000 thermostats, the humidifier communicates with the wireless outdoor sensor to make automatic humidity adjustments
Old Number 50063805-009
Includes: 1 - Ventilation Cap, 1 - Face Plate, 1 - Connector Plate, 2 - Insulated Transition Pieces
8 - #10 x 5/8 Screws, 3 - #10 x 2 Screws, 4 - Vinyp Panel Retainer, 1 - 1/4 inch Mesh Screen, and 2 - Tie Wraps
Old Number ZD8X26TZ
Power close and spring open damper - 24 volt motor used to control circulating air in HVAC systems and used when a normally open damper is required.
Mechanical visual position indicator for damper status - Solid construction using extruded aluminum frame and blades
Parallel blade design for low leakage performance - Simple, easy to wire, two wire installation - Reliable, strong, 24 volt spring return motor
Fail safe, normally open operation
Old Number ZD20X14TZ
Power close and spring open damper - 24 volt motor used to control circulating air in HVAC systems and used when a normally open damper is required.
Mechanical visual position indicator for damper status - Solid construction using extruded aluminum frame and blades
Parallel blade design for low leakage performance - Simple, easy to wire, two wire installation - Reliable, strong, 24 volt spring return motor
Fail safe, normally open operation
Old Number ZD18X18TZ
Power close and spring open damper - 24 volt motor used to control circulating air in HVAC systems and used when a normally open damper is required.
Mechanical visual position indicator for damper status - Solid construction using extruded aluminum frame and blades
Parallel blade design for low leakage performance - Simple, easy to wire, two wire installation - Reliable, strong, 24 volt spring return motor
Fail safe, normally open operation
Old Number ZD12X22TZ
Power close and spring open damper - 24 volt motor used to control circulating air in HVAC systems and used when a normally open damper is required.
Mechanical visual position indicator for damper status - Solid construction using extruded aluminum frame and blades
Parallel blade design for low leakage performance - Simple, easy to wire, two wire installation - Reliable, strong, 24-volt spring return motor.
Fail safe, normally open operation
High flow capacity water filter used to remove sediment and debris from residential or commercial water systems
Whole House Protection - Ideally suited for sediment removal applications that would quickly plug and restrict the flow of normal filters.
Used as a prefilter, the F76 protects elements of the water system, including specialized treatment devices or other common fixtures and appliances.
The flow filtering capacity and ease of cleaning make the F76S ideal for the most demanding applications - 100 Micron screen
Built-in secondary filter provides an uninterrupted supply of filtered water during backwashing - 3/4 MIPS or 3/4 inch sweat union connections
Old Number RA89A-1074
Provides intermediate switching of a line voltage device from a low voltage controller - Single pole, single throw (SPST) switching
Integral transformer provides low voltage power for control circuit - Turns circulator on or off, but not the burner
Old Number HE200A-1000
Includes HumidiPRO digital humidity control
Easy to install with quick snap bypass direction adjustment - Easy to replace pads - Versatile fit designed for more jobs.
Fast installation for labor and time savings - Operational noise reduction for humidity comfort without the ear aches