Contact our sales team for more information 860-221-SALE
Search results for
Relevant Product Categories
Old Number HE250A-1005
Includes HumidiPRO digital humidity control - Automatically closes the bypass when not in use
Easy to install with quick snap bypass direction adjustment - Easy to replace pads - Versatile fit designed for more jobs.
Fast installation for labor and time savings - Operational noise reduction for humidity comfort without the ear aches
Old Number PV150
1/2 inch FIPS connection size - 1-1/2 inch FIPS pipe size
Purges air through a no clog vent assembly, to control dirt and debris and minimize air vent fouling in Hydronic heating systems, while eliminating the need for bleeding.
No clog vent - Dirt and Debris resistant - 360 degree adjustable collar ring for installation flexibility - Stainless steel concentrator which eliminates gurgling noise
Bronze body for rigid construction.
Old Number C7835A-1009
For use with W8835 and W8635 - Duct mounted
Old Number L4008E-1156
130 Degrees to 270 degrees - Single pole single throw - Breaks on temperature rise - Fixed differential - Includes 66 inch long capillary and heat conductive compound
Totally enclosed Micro Switch snap-acting switches operate on temperature rise to setpoint.
Visible control point scale and external adjustment screw permit easy setting - Horizontal or vertical mounting
Direct or well immersion of the sensing element
Old Number 50027910-001
Fits TrueSTEAM Humidifiers - Duct or Remote Mount
For 1 heat and 1 cool systems including heat pump without auxilliary heat - 24 volt and/or battery - LCD backlit screen - Touchpad controls
For use with EARD6, VNT5150, VNT5200 and VNT5070 - Operates a fresh air intake damper, and, when neccesary, activates the main HVAC blower to bring in fresh air
Used for 24 volt intermittent pilot boilers - Solenoid operated first automatic valve opens on thermostat call for heat, and closes when call for heat ends - Diaphragm operated second automatic valve opens under control of regulator and closes if gas or power supply is interrupted - Includes natural gas to LP conversion kit
Fits virtually all water heaters up to 1 inch tappings - Inludes an 11 inch flexible stainless steel connector, mixing valve and cold water tee fitting
208 volts, 277 volts or 480 volts Input - 9 inch primary color coded wire leads and 9 inch color coded lead wires for secondary connections - 50VA output - Foot or plate mounted - Button for manually resetting the circuit breaker
Old Number VR8304P-4504
Includes safety shutoff, manual valve, two automatic operators, pressure regulator, and pilot adjustment - LP conversion kit is not available
Single stage - 24 Volt - Step Opening - 300,000 BTU per hour at 1 inch water column - 30,000 BTU per hour minimum - 415,000 BTU per hour maximum
Easy to install, adjust and service; all adjustments and connections are accessible from top of control
Provides two automatic valves: Solenoid operated first automatic valve opens on thermostat call for heat, closes when call for heat ends - Diaphragm operated second automatic valve opens under control of regulator and closes if gas or power supply is interrupted
Meets codes requiring dual safety shutoff - Complete safety shutoff on pilot flame failure - ON-OFF lighting sequence
Old Number VC8114ZZ-11
Used with VC series valves, 1000 series 2 way valves, and 6000 series 3 way valves
Controls central heating and cooling - Use with two-way or three-way valves - Double insulated actuator
Five foot plenum rated cable - Mounts directly on valve - Quick and easy replacement of moving parts
Selectable and switchable electronic fail safe is normally open or normally closed
All VC Series actuator valve combinations provide 60 psi close off
Old Number TRN2427T1
Higher efficiency and lower pressure drop than OEM filter - Captures particles as small as 0.3 microns - Pleated filter for greater media capacityLow pressure drop reduces strain on equipment, provides a comfortable air flow, and helps maintain equipment efficiency.
Easy installation because angled edge fits neatly into offset side of air cleaner frame - MERV 10
Old Number TG512D-1003
Outside Height: 7-1/4 inch - Outside Width: 9-5/8 inch
Depth: 3-1/4 inch
Inside Height: 5-7/8 inch - Inside Width: 8-3/8 inch
Unique double wall construction provides extra measure of tamper resistance - Used in both new and existing applications.
Tamper resistant lock; key cannot be removed unless in locked position - All models mount vertically or horizontally on wall or exposed junction box.
Vents in guard base allow airflow for optimum thermostat performance.
Old Number TB7220U-1012
Seven day programmable thermostat that provides universal system compatibility, precise comfort control and is easy to program
Provides temperature control for gas, oil, electric and heat pumps for up to 2 heat and 2 cool systems.
Large, clear display with backlight shows the current and set temperature and time - Menu driven programming.
Real time clock keeps time during power failures and automatically updates to daylight savings.
Saving Changes notification lets you know when the schedule changes have been saved.
Change reminders let you know when to replace the batteries - Holiday Override options allow you to override the program schedule
Speedy same schedule programming; no need to copy multiple days.
Armchair programming allows you to remove the thermostat from the wall for programming
Old Number SV9641M-4510
SmartValve gas valve combines gas flow control and electronic intermittent pilot sequencing functions into a single unit
The Q3450 or Q3480 Pilot hardware (not included) supplies the low voltage igniter, flame sensor and pilot burner
These ignition system controls provide all gas ignition safety functions by controlling gas flow, ignition source, and a 120 Vac or 240 Vac combustion air blower
The controls also monitor the appliance airflow proving switch and limit string to assure proper appliance operation, and provide prepurge, postpurge, and timed trial for pilot ignition with 100 percent shutoff and continuous retry
Includes a diagnostic LED indicator for system status - It can directly interface with the appropriate power supplies and a system thermostat for additional appliance applications
When controlled directly by a thermostat, the control does not provide a postpurge function, as power to the control is removed when the thermostat call for heat ends
Includes LP conversion kit and two 3/4 x 1/2 bushings
Old Number SV9520H-8513
SmartValve gas valve combines gas flow control and electronic direct main burner ignition sequencing functions into a single unit
The ignition source is 120V hot surface igniter lighting the main burner flame
Provides all gas ignition safety functions by controlling gas flow, ignition source, and a 120 Vac combustion air blower
The control also monitors the appliance airflow proving switch circuit and limit string to assure proper appliance operation
Provides prepurge, postpurge and timed trial for ignition with multiple ignition trials and auto reset from lockout
Diagnostic LED indicates system status - Communicates directly with the ST9160 Electronic Fan Timer (EFT) in typical forced warm air furnace applications.
can directly interface with the appropriate power supplies and a system thermostat for additional appliance applications.
When controlled directly by a thermostat, the control does not provide a postpurge function, as power to the control is removed when the thermostat call for heat ends
Includes LP conversion kit
Includes: Silicon carbide igniter, bracket, screw, 5-11/16 inch lead, and wiring accessories to adapt the igniter to the specific appliance application
Wiring Terminal Type: 1/4 inch female QC terminals
Connection Type: 1/4 inch female QC terminals
Designed to provide a robust field service replacement igniter in gas fired appliances with 120 VAC silicon carbide hot surface igniters
Uses a 120 volt silicon carbide igniter design with long life and high resistance to damage or burn out in the appliance - Natural Gas or LP
Includes: Silicon carbide igniter, bracket, screw, 5-1/4 inch lead, and wiring accessories to adapt the igniter to the specific appliance application
Wiring Terminal Type: Receptacle with .093 inch male pins
Connection Type: Receptacle with .093 inch male pins
Designed to provide a robust field service replacement igniter in gas fired appliances with 120 VAC silicon carbide hot surface igniters
Uses a 120 volt silicon carbide igniter design with long life and high resistance to damage or burn out in the appliance - Natural Gas or LP
Includes: Silicon carbide igniter, bracket, screw, 1-3/8 inch lead, and wiring accessories to adapt the igniter to the specific appliance application
Wiring Terminal Type: 1/4 inch female QC terminals
Connection Type: 1/4 inch female QC terminals
Designed to provide a robust field service replacement igniter in gas fired appliances with 120 VAC silicon carbide hot surface igniters
Uses a 120 volt silicon carbide igniter design with long life and high resistance to damage or burn out in the appliance - Natural Gas or LP
Includes: Silicon carbide igniter, bracket, screw, 5-1/4 inch lead, and wiring accessories to adapt the igniter to the specific appliance application
Wiring Terminal Type: Molex side lock connector with .092 male pins
Connection Type: Molex side lock connector with .092 male pins
Designed to provide a robust field service replacement igniter in gas fired appliances with 120 VAC silicon carbide hot surface igniters
Uses a 120 volt silicon carbide igniter design with long life and high resistance to damage or burn out in the appliance - Natural Gas or LP
Includes: Silicon carbide igniter, round bracket, screw, 5-1/4 inch lead, and wiring accessories to adapt the igniter to the specific appliance application
Wiring Terminal Type: Receptacle with .093 inch male pins
Connection Type: Receptacle with .093 inch male pins
Designed to provide a robust field service replacement igniter in gas fired appliances with 120 VAC silicon carbide hot surface igniters
Uses a 120 volt silicon carbide igniter design with long life and high resistance to damage or burn out in the appliance - Natural Gas or LP
Includes: Silicon carbide igniter, bracket, screw, 6 inch lead, and wiring accessories to adapt the igniter to the specific appliance application
Wiring Terminal Type: Receptacle with .093 inch male pins
Connection Type: Receptacle with .093 inch male pins
Designed to provide a robust field service replacement igniter in gas fired appliances with 120 VAC silicon carbide hot surface igniters
Uses a 120 volt silicon carbide igniter design with long life and high resistance to damage or burn out in the appliance - Natural Gas or LP
Includes: Silicon carbide igniter, bracket, screw, 5-1/4 inch lead, and wiring accessories to adapt the igniter to the specific appliance application
Wiring Terminal Type: Receptacle with .093 inch male pins
Connection Type: Receptacle with .093 inch male pins
Designed to provide a robust field service replacement igniter in gas fired appliances with 120 VAC silicon carbide hot surface igniters
Uses a 120 volt silicon carbide igniter design with long life and high resistance to damage or burn out in the appliance - Natural Gas or LP
Old Number L4008A-1015
100 Degrees to 240 degrees - Single pole single throw - Breaks on temperature rise - Adjustable differential - Includes 66 inch long capillary
Totally enclosed Micro Switch snap-acting switches operate on temperature rise to setpoint.
Visible control point scale and external adjustment screw permit easy setting - Horizontal or vertical mounting
Direct or well immersion of the sensing element
Old Number 50041883-001
Fits HE150, HE250, and HE300 Humidifiers
Old Number ZD6X8TZ
Power close and spring open damper - 24 volt motor used to control circulating air in HVAC systems and used when a normally open damper is required.
Mechanical visual position indicator for damper status - Solid construction using extruded aluminum frame and blades
Parallel blade design for low leakage performance - Simple, easy to wire, two wire installation - Reliable, strong, 24 volt spring return motor
Fail safe, normally open operation
Old Number ZD28X8TZ
Power close and spring open damper - 24 volt motor used to control circulating air in HVAC systems and used when a normally open damper is required.
Mechanical visual position indicator for damper status - Solid construction using extruded aluminum frame and blades
Parallel blade design for low leakage performance - Simple, easy to wire, two wire installation - Reliable, strong, 24 volt spring return motor
Fail safe, normally open operation
Old Number ZD6X14TZ
Power close and spring open damper - 24 volt motor used to control circulating air in HVAC systems and used when a normally open damper is required.
Mechanical visual position indicator for damper status - Solid construction using extruded aluminum frame and blades
Parallel blade design for low leakage performance - Simple, easy to wire, two wire installation - Reliable, strong, 24 volt spring return motor
Fail safe, normally open operation
Old Number ZD6X18TZ
Power close and spring open damper - 24 volt motor used to control circulating air in HVAC systems and used when a normally open damper is required.
Mechanical visual position indicator for damper status - Solid construction using extruded aluminum frame and blades
Parallel blade design for low leakage performance - Simple, easy to wire, two wire installation - Reliable, strong, 24 volt spring return motor
Fail safe, normally open operation
Old Number ZD28X10TZ
Power close and spring open damper - 24 volt motor used to control circulating air in HVAC systems and used when a normally open damper is required.
Mechanical visual position indicator for damper status - Solid construction using extruded aluminum frame and blades
Parallel blade design for low leakage performance - Simple, easy to wire, two wire installation - Reliable, strong, 24 volt spring return motor
Fail safe, normally open operation
Old Number ZD26X10TZ
Power close and spring open damper - 24 volt motor used to control circulating air in HVAC systems and used when a normally open damper is required.
Mechanical visual position indicator for damper status - Solid construction using extruded aluminum frame and blades
Parallel blade design for low leakage performance - Simple, easy to wire, two wire installation - Reliable, strong, 24 volt spring return motor
Fail safe, normally open operation
Old Number ZD24X14TZ
Power close and spring open damper - 24 volt motor used to control circulating air in HVAC systems and used when a normally open damper is required.
Mechanical visual position indicator for damper status - Solid construction using extruded aluminum frame and blades
Parallel blade design for low leakage performance - Simple, easy to wire, two wire installation - Reliable, strong, 24 volt spring return motor
Fail safe, normally open operation
Old Number ZD20X20TZ
Power close and spring open damper - 24 volt motor used to control circulating air in HVAC systems and used when a normally open damper is required.
Mechanical visual position indicator for damper status - Solid construction using extruded aluminum frame and blades
Parallel blade design for low leakage performance - Simple, easy to wire, two wire installation - Reliable, strong, 24 volt spring return motor
Fail safe, normally open operation
Old Number ZD18X6TZ
Power close and spring open damper - 24 volt motor used to control circulating air in HVAC systems and used when a normally open damper is required.
Mechanical visual position indicator for damper status - Solid construction using extruded aluminum frame and blades
Parallel blade design for low leakage performance - Simple, easy to wire, two wire installation - Reliable, strong, 24 volt spring return motor
Fail safe, normally open operation
Old Number ZD18X14TZ
Power close and spring open damper - 24 volt motor used to control circulating air in HVAC systems and used when a normally open damper is required.
Mechanical visual position indicator for damper status - Solid construction using extruded aluminum frame and blades
Parallel blade design for low leakage performance - Simple, easy to wire, two wire installation - Reliable, strong, 24 volt spring return motor
Fail safe, normally open operation
Old Number ZD14X20TZ
Power close and spring open damper - 24 volt motor used to control circulating air in HVAC systems and used when a normally open damper is required.
Mechanical visual position indicator for damper status - Solid construction using extruded aluminum frame and blades
Parallel blade design for low leakage performance - Simple, easy to wire, two wire installation - Reliable, strong, 24-volt spring return motor.
Fail safe, normally open operation
Old Number ZD14X16TZ
Power close and spring open damper - 24 volt motor used to control circulating air in HVAC systems and used when a normally open damper is required.
Mechanical visual position indicator for damper status - Solid construction using extruded aluminum frame and blades
Parallel blade design for low leakage performance - Simple, easy to wire, two wire installation - Reliable, strong, 24-volt spring return motor.
Fail safe, normally open operation
Old Number ZD12X18TZ
Power close and spring open damper - 24 volt motor used to control circulating air in HVAC systems and used when a normally open damper is required.
Mechanical visual position indicator for damper status - Solid construction using extruded aluminum frame and blades
Parallel blade design for low leakage performance - Simple, easy to wire, two wire installation - Reliable, strong, 24-volt spring return motor.
Fail safe, normally open operation
Old Number YTL9160AR-1000
Includes one TL9160AR-1002/U line voltage thermostat. and one TLM1110R-1000/U equipmenr interface module
Easily relocate line voltage thermostats or upgrade electric baseboard heaters with built in thermostat without running new wires
Wireless Installation eliminates opening walls for system or control upgrades - Precise Temperature Control
User friendly plain language Interface - RedLINK compatible
Old Number T812A-1002
For low voltage control of single stage heating - Snap acting bimetal switch uses no mercury and does not require leveling
Single pole, single throw (SPST) switching
Old Number TG512A-1009
Outside Height: 7-1/4 inch - Outside Width: 9-3/4 inch
Depth: 3-3/8 inch
Inside Height: 5-7/8 inch - Inside Width: 8-3/8 inch
Unique double wall construction provides extra measure of tamper resistance - Used in both new and existing applications.
Tamper resistant lock; key cannot be removed unless in locked position - All models mount vertically or horizontally on wall or exposed junction box.
Vents in guard base allow airflow for optimum thermostat performance.
