Series LFB6400 2-Piece, Standard Port, Lead Free Ball Valves are used in commercial and industrial applications for a full range of liquids and gases. It comes standard with actuator mounting pads. The LFB6400 standard port orifice ensures minimal pressure drop, while Durafill seats, blow-out proof pressure retaining stem and stainless steel ball provide lasting service.
WATTS® Ball Valve, 2-Piece, 3/4 in Nominal, 600 psi Pressure, -55 to 450 deg F, Standard Port, Media: Gas/Liquids, 11/16 in Orifice, 316 Stainless Steel Ball, 2-7/8 in Inlet to Outlet Length, 2 in Top to Inlet Center, Bronze Body, 316 Stainless Steel Stem and PTFE Durafill® Seat Trim, PTFE Softgoods, Domestic
Search results for
All Products
1,090
products found manufactured by Watts
Relevant Product Categories
Series LF40L, LF40XL Automatic Reseating Temperature and Pressure Relief Valves are used in commercial water heater applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters. They feature a Lead Free* brass body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, tamper-resistant bonnet screws, automatic reseating feature, and test lever. Model LF40L has a short thermostat for installation directly in available tank tapings. Model LF40XL has an extension thermostat for installation in the hot water outlet within the allowable distance from the top of the tank. Series LF40L, LF40XL valves are ASME rated and CSA listed. Temperature Relief: 210 deg F (99 deg C), Pressure Range: 75 to 150psi (5.2 to 10.3 bar), Standard Pressure Settings: 75, 100, 125, or 150psi (5.27, 7.03, 8.79, or 10.55 bar).
WATTS® Temperature/Pressure Relief Valve, Automatic Reseating, Series: LF40, 3/4 in Nominal, MNPT x FNPT, 125 psi, 210 deg F, Media: Water, Brass Body, 2-5/8 in W x 5-5/8 in H, Domestic
This rubber parts kit includes the parts necessary to repair or replace all the rubber internal parts of a 1 and 1-1/4 in pressure vacuum breaker. All parts are genuine and original to the valve.
Febco® Parts Kit, For Use With: Model 765EBV/765FBV/765EUB/765FUB 1 to 1-1/4 in Pressure Vacuum Breaker, Rubber, Import
Overview
This replacement media is designed for a 8 GPM OneFlow(R) Residential anti-scale system. It conditions cold and hot water and provides scale protection on internal and external plumbing surfaces to extend the life of equipment by transforming dissolved hardness minerals into harmless, inactive microscopic particles. The media is NSF and ANSI certified for material safety and should be replaced every 3 years.
Features
- Certified for material safety to NSF and ANSI Standard 42 and 61
- Requires no chemical additives or electricity
- Long life media must be replaced every 3 years
- No backwashing, regeneration or discharge water required
This bonnet assembly kit includes the parts necessary to repair or replace the bonnet assembly of a 1 and 1-1/4 in pressure vacuum breaker. This kit consists of bonnet, O-ring, spring, E-ring, washer and stem. All parts are genuine and original to the valve.
Febco® Bonnet Kit, For Use With: Model 765 1 in and 1-1/4 in Pressure Vacuum Breaker Valve, Import
* 0009325 F X F UNION
1" LEAD FREE WATER PRESSURE REDUCING VALVE
NPT FEMALE UNION X NPT FEMALE
POLYMER SEAT
GAUGE TAPPING
GAUGE - ADJUST 25-75 PSI
This check assembly kit includes the parts necessary to repair or replace the check assembly of a 1 and 1-1/4 in pressure vacuum breaker, series 765. This kit consists of all parts necessary to repair the check springs of the applicable pressure vacuum breaker. All parts are genuine and original to the valve.
Febco® Check Kit, For Use With: Model 765 1 in and 1-1/4 in Pressure Vacuum Breaker Valve, Import
Series LF223, LF223S Lead Free High Capacity Water Pressure Reducing Valves are used in commercial, industrial, and institutional applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption. It consists of a Lead Free brass body construction (2-1/2 in is iron), enlarged diaphragm, spring cage and seat orifice for super capacity, sealed spring cage for waterworks pit installations and an optional thermal expansion bypass. Available with NPT threaded female inlet and NPT female threaded outlet with (LF223-S) or without (LF223) strainer.
WATTS® Pressure Reducing Valve, High Capacity, 3/4 in Nominal, FNPT, 25 to 75 psi, 33 to 160 deg F, Media: Water, 4-1/4 in Inlet to Outlet Length, 6-1/4 in Top to Inlet Center, Brass Body, Buna-N® O-Ring, Seat Gasket/Reinforced Buna-N® Diaphragm, Domestic
WATTS® drainage WD Series PDI Certified recessed or floor mounted Epoxy Powder Coated steel grease interceptor with gasketed Epoxy Powder Coated steel skid-proof cover secured with hex head center bolt(s), removable baffle assembly, deep seal trap with cleanout, external cast iron flow control fitting and No-Hub (standard) connections.
WATTS® Grease Interceptor, Ceiling, Series: WD Series, 2 in Nominal, 30 lb Capacity, 15 gpm, Steel, 22 in L x 15 in W x 14 in H
Overview
This 1/2 inch lead free thermostatic mixing valve is designed for residential, commercial or institutional environments for supplying baths or lavatories with tempered water. The double throttling design controls both hot and cold water supply to the mixed outlet. It consists of a lead free brass body, threaded union connections, solid wax hydraulic principle thermostat, integral filter washers and check valves with a locking mechanism for the temperature setting. The adjustable field range temperature at mixed outlet is 80 to 120 degrees F (27 to 49 degrees C). The maximum pressure rating is 150 psi (10.3 bar).
Features
- Thermal actuation technology for precise temperature control
- Lead free brass construction
- ASSE 1070, ASSE 1069, ASSE 1017 and UPC listed
- Locking mechanism secures temperature setting
Overview
This 3/8 inch dual check valve backflow preventer with atmospheric port and strainer for carbonated beverage machines prevents the reverse flow of polluted water, such as carbon dioxide gas and carbonated water, from entering into the potable water supply due to backpressure backflow. It is designed for continuous or intermittent pressure applications and ideal for use on post-mix carbonated beverage equipment and dispensing equipment for tea and coffee. This valve consists of stainless steel body construction, male NPT end connections, internal rubber components and an atmospheric vent and a wye pattern strainer. Includes an atmospheric port that provides visual indication of failure of the second check.
Features
- Maximum working pressure is 150 psi (10 bar)
- Includes strainer
- Can be installed vertically or horizontally
- For carbonated beverage machines
Series 174A Boiler Pressure Relief Valves are used in hot water heating and domestic supply boiler applications to protect against excessive pressures on all types of hot water heating supply boiler equipment. It consists of a bronze body construction with NPT threaded female inlet and NPT threaded female outlet (drain) connections, non-metallic disc-to-metal seating, stainless steel spring, and test lever. Series 174A resists corrosive water conditions, sticking and freezing, and prevents water and sediment from being trapped in the seat. It is designed for emergency safety relief and shall not be used as an operating control. Standard Pressure Setting: 30psi (206.9 kPa), Pressure Range: In 5psi (34.5 kPa) increments from 30 to 150psi (2 to 10 bar) with corresponding high ratings from 650,000 to 14,370,000 BTU/hr.
WATTS®, 0276500, Pressure Relief Valve, Series: 174A, 1-1/2 in Nominal, FNPT End Style, 30 psi Pressure, 250 deg F, Media: Water, Bronze Body, 4-3/4 in L x 9-1/4 in H Dimensions, Domestic
Cover assembly consists of a complete factory assembled unit which simply bolts on for ease of repair. No pipe connections need to be broken. There will be no reduction in the original trap's capacity.
WATTS® Replacement Cover Assembly, For Use With: Spirax-Sarco Float and Thermostatic Steam Trap, 1 in, Domestic
This 3/4 x 3/4 in dependable, low cost, high capacity safety relief valve is designed for low pressure, steam heating boilers and process equipment used in industrial and commercial applications. It features a brass body, stainless steel spring, top guided stem, MNPT inlet by threaded female outlet (drain) connection and a non-stick PTFE disc-to-metal seat to assure positive shutoff. The factory pressure setting for saturated steam service is set at 15 psi. This valve has an ASME, section IV rating.
WATTS®, 0346045, Steam Safety Relief Valve, Series: 415, 3/4 in Nominal, MNPT x FNPT End Style, Forged Brass Body, 2-13/16 in H Dimensions, Domestic
Series G, GH, MG, MGH Thermostatic Radiator Steam Traps are designed to remove condensate, air and non-condensable gases from heating systems, while still sensitive enough to close tightly in the presence of steam. Available in choice of various body patterns including angle, straightway, left hand corner, right hand corner, vertical and vertical double union.
WATTS® Radiator Steam Trap, Series: GH Series, 3/4 in Nominal, Thread End Style, 25 psi Pressure, Rugged Brass, 100 to 320 deg F, Domestic/Import: Domestic
This epoxy-coated, cast iron floor drain is ideal for sanitary floor applications. It features a 5 in round, adjustable, heel-proof, stainless steel strainer, reversible clamping collar with primary and secondary weep holes, anchor flange and 3 in no hub connection. This item carries a Medium Duty load rating and can be purchased as BAA compliant. Sediment Bucket, vandal proof, trap primer tapping, backwater valve, hinged grate, galvanized body, strainer extension and various funnel options are also available.
WATTS® Floor Drain, Series: FD-1100-A, 3 in Outlet, No-Hub Connection, Cast Iron Drain, 13/16 x 3-1/4 in Grid, Stainless Steel Grid, Epoxy Coated, 8-1/8 in L Dimensions, Domestic/Import: Import
This 10 in hi-temp red housing with a red cap accepts slim-line filters. The housing cap features a 3/4 in NPT pipe size connection. A leak-proof sealing is accomplished by compression against a top seated EPDM O-ring located in the housing's sump. The heavy-duty construction is made using high quality FDA grade polypropylene. It has a superior chemical resistance from many aggressive chemicals. The thick side walls and buttress thread design allows for superior sealing and security. It is rated at temperatures up to 200 F (93 C). The water pressure is rated up to 125 PSI (8.75 BAR).
WATTS® Filter Housing, High Temperature, 12-1/2 in Height, 200 deg F, Plastic, Import
Series LF223, LF223S Lead Free High Capacity Water Pressure Reducing Valves are used in commercial, industrial, and institutional applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption. It consists of a Lead Free brass body construction (2-1/2 in is iron), enlarged diaphragm, spring cage and seat orifice for super capacity, sealed spring cage for waterworks pit installations and an optional thermal expansion bypass. Available with NPT threaded female inlet and NPT female threaded outlet with (LF223-S) or without (LF223) strainer.
WATTS® Pressure Reducing Valve, High Capacity, 1 in Nominal, FNPT, 25 to 75 psi, 33 to 160 deg F, Media: Water, 4-3/4 in Inlet to Outlet Length, 6-1/2 in Top to Inlet Center, Brass Body, Buna-N® O-Ring, Seat Gasket/Reinforced Buna-N® Diaphragm, Domestic
This 2 1/2 inch super capacity lead free water pressure reducing valve is commonly installed at the meter in residential, commercial and industrial buildings. It is designed to control the water pressure flowing to all the appliances and outlets within the building and provides an inexpensive means of supplying lower, more functional water pressure to outlets and appliances. It features a lead free cast copper silicon alloy body, bypass to control thermal expansion pressure, NPT threaded female inlet and outlet connections, high temperature resisting enlarged diaphragm for hot or cold temperatures, a sealed spring cage and seat orifice for super capacity performance. This valve can be used for accessible outdoor waterworks or pit installations. The adjustable reduced pressure range is 25 to 75 psi (172 to 517 kPa).
WATTS® Pressure Reducing Valve, Super Capacity, Series: LFN223, 2-1/2 in Nominal, FNPT, 25 to 75 psi, 33 to 160 deg F, Media: Water, 7-7/8 in Inlet to Outlet Length, 10-3/4 in Top to Inlet Center, Cast Copper Silicon Alloy Body, Reinforced Buna-N® Diaphragm
Series LF127W High Capacity Water Pressure Reducing Valves are used in commercial and industrial applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption. It consists of a Lead Free bronze body construction with NPT threaded inlet and outlet connections, replaceable stainless steel seat and high temperature resisting interchangeable diaphragm chamber.
WATTS®, 0009906, Pressure Reducing Valve, High Capacity, Series: LF127W, 4 in Nominal, Flanged End Style, 25 to 100 psi Pressure, 33 to 160 deg F, Media: Water, 12-1/8 in Inlet to Outlet Length, 16-1/8 in Top to Inlet Center, Copper Silicon Alloy Body, Stainless Steel Trim, Domestic
This 905 non air gap design brushed nickel finish faucet is designed for dispensing water from a reverse osmosis system or a water filtration unit that does not require a drain connection with an air gap. This faucet is designed to be used with 1/4 in tubing. The tubing is not included.
WATTS® Drinking Water Faucet, Series: PWFCT905, Designer, Swivel Neck Spout, Lever Handle, Side Spray(Y/N): No, 7/8 in Faucet Hole, Ceramic Disc Valve/Cartridge, Brushed Nickel, Import
This repair kit is for the replacement of the 4 in WATTS® backflow preventer valve seat. This kit consists of a seat and a seat O-ring, retainer wire and a cover O-ring.
WATTS® Seat Kit, For Use With: Model LF909 and 909 4 in Watts Backflow Preventer Valve, Domestic
Features
- No special tools required for changing parts
- Factory Replacement Kit
- All parts are made of high quality materials
Series LFCP-15 is a direct acting, diaphragm actuated Pilot that automatically reduces a higher upstream (inlet) pressure to a constant downstream (outlet) pressure. It is normally held open by the force of the adjustable spring setting above the diaphragm. The Pilot modulates towards a closed position when outlet pressure exceeds the spring setpoint, lowering the delivery pressure. It modulates towards an open position when the outlet pressure falls below the spring setpoint, increasing the delivery pressure. When a series LFCP-15 is installed in the piping circuit of an automatic control valve, its throttling action causes the main valve to throttle open or closed accordingly. Turning the adjustment screw clockwise raises the control setpoint, increasing main valve outlet pressure. Turning the adjustment screw counterclockwise lowers the control setpoint, decreasing Main Valve outlet pressure. The Series LFCP-15 is equipped with one 3/8 in NPT inlet and two outlet ports for ease of installation. The unused outlet port may be plugged or used as a pressure gauge connection.
WATTS® Pressure Reducing Pilot, Series: LFCP15, 3/8 in Nominal, NPT, 400 psi, Media: Water, 2.95 in Inlet to Outlet Length, 5.37 in Top to Inlet Center, Copper Silicon Alloy Body, 316 Stainless Steel Trim/304 Stainless Steel Stem/302 Stainless Steel Spring Trim, Buna-N, Domestic
WATTS® drainage Products CO-200-R epoxy coated cast iron floor cleanout with 5-1/8 in (130mm) round adjustable nickel bronze (standard) top and no hub (MJ) connection.
WATTS® Floor Cleanout, Series: CO-200-R, 4 in Cleanout, 4-3/4 in Outlet, 5-1/8 in Cover, Nickel Bronze Cover, No-Hub Connection, Cast Iron, Epoxy Powder Coated, Domestic/Import: Import
This 1/2 to 3/4 in second check replacement kit, for series SS007M3, is used to prevent the backflow of contaminated water into the potable water supply. It consists of a seat, seat O-ring, disc assembly and spring, check cage and cover O-ring. It is ideal at referenced cross-connections identified as non-health hazard applications. Check with local inspection authorities for installation requirements.
WATTS® Second Check Kit, For Use With: Model 007/LF007 1/2 to 3/4 in Double Check Valve Assemblies, Domestic
Series 174A Boiler Pressure Relief Valves are used in hot water heating and domestic supply boiler applications to protect against excessive pressures on all types of hot water heating supply boiler equipment. They have a bronze body construction with FNPT inlet and FNPT outlet with corresponding high ratings from 650000 to 14370000 Btu/hr.
WATTS® Pressure Relief Valve, Series: 174A, 1-1/4 in Nominal, FNPT, 75 psi, 250 deg F, Media: Water, Bronze Body, Non-Metallic Trim, 4-1/4 in L x 8-1/2 in H, Domestic
This relief valve rubber parts repair kit is used for replacing or repairing the relief valve assembly on a 2-1/2 and 3 in reduced pressure zone assembly which is used to prevent the reverse flow of polluted water from entering into the potable water supply due to back siphonage and or backpressure. This kit consists of a sleeve O-Ring, seat O-Ring, piston O-Ring, stem O-Ring, RV disc assembly, diaphragm, piston seal, bottom plug O-Ring, adapter O-Ring and lubricant.
WATTS® Total Parts Kit, For Use With: Series 909RPDA 4 in Reduced Pressure Detector Assembly, Rubber, Domestic
This OSY flanged gate valve, Watts 4 IN model 408-OSY-RW, is used in fire protection applications in fire main shutoff applications. It features an epoxy coated cast iron body with flanged connections, resilient wedge disc, and cast iron handwheel. It is UL/FM listed and complies with MSS-SP-70. The maximum pressure is 250 psi (17 bar) CWP.
WATTS®, 0702320, Gate Valve, Straight, Series: 408, 4 in Nominal, Flanged End Style, 250 psi Pressure, 60 to 140 deg F, Full Port, Cross Handle Actuator, 9 in Inlet to Outlet Length, 22-3/4 in Top to Inlet Center, Cast Iron Body, Buna-N® O-Ring Softgoods, 10 in Diameter Hand Wheel, Epoxy Coated
Features
- No special tools required for changing parts
- Factory Replacement Kit
- All parts are made of high quality materials
Overview
This 3/4 inch boiler pressure relief valve is used in hot water heating and domestic supply boiler applications to protect against excessive pressures on all types of hot water heating supply boiler equipment. It consists of a bronze body construction with NPT threaded female inlet and NPT threaded female outlet (drain) connections, non-metallic disc-to-metal seating, stainless steel spring, and test lever. It resists corrosive water conditions, sticking and freezing, and prevents water and sediment from being trapped in the seat. It is designed for emergency safety relief, not as an operating control. The pressure relief is set at 100 psi (689.5 kPa) with corresponding high pressure ratings up to 1,695,000 BTU/hr.1,695,000 BTU/hr.
Features
- Spring loaded
- Non mechanical seat-to-disc alignment will not stick or freeze
- Bronze body
- Automatic reseating
Series LFFBV 2-Piece, Full Port, Lead Free Bronze Ball Valves comply with MSS-SP-110 and feature a blowout proof stem and virgin PTFE seats. The LFFBV full port design ensures maximum flow capacity and minimal pressure drop. The LFFBV features Lead Free construction to comply with Lead Free installation requirements. Model LFFBV has threaded NPT end connections. Pressure Rating: 600 psi (41 bar) WOG (non-shock) AT 100 deg F (38 deg C) and 125 psi (8.6 bar) WSP.
WATTS® Ball Valve, 2-Piece, Series: LFFBV, 1/2 in Nominal, MNPT End Style, 600 psi WOG, 125 psi WSP Pressure, 0 to 350 deg F, Full Port, Media: Gas/Liquids, 1/2 in Orifice, Handle Actuator, Bronze Ball, 2-3/16 in Inlet to Outlet Length, 1-3/4 in Top to Inlet Center, Silicon Bronze Body, Brass Stem/Virgin PTFE Seat Trim, Virgin PTFE Thrust Washer/Stem Packing Softgoods, Import
This pressure relief valve has a 3/4 inch NPTF female inlet and outlet and a 60 psi pressure relief setpoint. The valve can be used for hot water space heating boiler applications to protect against excessive pressure. It features a bronze body, non-metallic disc-to-metal seating, and test lever. Includes a nonrestrictive discharge drain line flood sensor with SentryPlus Alert(R) technology to detect excessive water discharges from the relief valve. Sensor activation requires purchase of an activation kit which can be connected to existing building management systems or the Watts Cellular Gateway.
WATTS®, F274547, Valve, Automatic Reseating, Series: 174A, 3/4 in Nominal, Female NPTF End Style, 50 psi Pressure, 250 deg F, Media: Water, Bronze Body, Non-Metallic Trim, 4-1/2 in H x 2-3/4 in L Dimensions, Domestic