This residential OneFlow(R) anti-scale system provides a home with protection from internal scale formation on plumbing surfaces up to 8 GPM. Water using appliances and plumbing fixtures have a longer lifespan because hardness scale build up on internal parts no longer occurs. This system is specifically designed for residential applications. This system should be installed at the point-of-entry to a home to treat both the hot and the cold water.
Features
No control valve, no electricity and no wastewater
Improves efficiency of all water using appliances, both hot and cold
Series A2C IntelliFlow Automatic Washing Machine Water Shutoff Valves with Leak Sensor are used in residential applications to protect against catastrophic water damage from a burst inlet hose connected to a washing machine in use or unattended. The Series A2C IntelliFlow senses when the washing machine is on or off, and then opens or closes the hot and cold inlet valves as needed to allow or prevent water from flowing to the washer. If the Series A2C detects a leak, current flow to both the hot and cold water valves are immediately interrupted and closed. It consists of an electrical three-prong outlet to receive a washing machine power cable, leak sensor, a power cord, and a replaceable internal strainer screen. Maximum Pressure: 150psi (10 bar).
WATTS® IntelliFlow® Shutoff Valve, Automatic, Series: A2 Series, 1/2 in Nominal, 150 psi, 180 deg F, Media: Water, Domestic
This 3/8 inch lead free small water pressure regulator is used in small general purpose applications to regulate water pressure in piping systems using water and No. 2 fuel oil. It has an oversized orifice and is ideally used on beverage dispensing and paint spraying equipment, ice cube machines, humidifiers, drinking fountains, and other small process applications. It consists of a lead free brass body with an adjusting tee handle, NPT threaded female connections, two-way low water pressure gauge port, aluminum spring cage, Buna-N stainless steel disc, and a reinforced Buna-N diaphragm. The reduced water pressure range is 1 to 25 psi (0.1 to 1.7 bar) and is factory set at 10 psi (0.7 bar).
Features
Temperature range is 0 to 140 degrees F (-18 to 60 degrees C)
This epoxy-coated, cast iron cleanout is designed for floor applications. It features a 5 in round, adjustable, gasketed, nickel bronze top and removable, gas-tight, gasketed, brass cleanout plug and no hub connection for a 2 in pipe. This item carries a Medium Duty load rating and can be purchased as BAA compliant. Membrane clamp, vandal proof and galvanized body options are also available.
WATTS® Floor Cleanout, Adjustable, Series: CO-200-R, 2 in Cleanout, 4-3/4 in Outlet, 2000 to 4999 lb Load, No-Hub Connection, Cast Iron, Epoxy Coated, Domestic/Import: Import
This 1 in bronze automatic reseating temperature and pressure relief valve has a 9 in thermostat and is installed directly in tank tapings. It is used in commercial applications to provide automatic temperature and pressure protection for hot water supply tanks and hot water heaters. This valve features a bronze body with FNPT inlet and FNPT outlet connections, thermo-bonded coated thermostat, tamper resistant bonnet screws, automatic reseating feature and a test lever. The temperature relief is 210 deg F and the pressure relief is 150 psi.
WATTS® Temperature/Pressure Relief Valve, Automatic Reseating, Series: 140, 1 in Nominal, FNPT, 210 deg F, Media: Water, Bronze Body, 3 in W x 5-3/4 in H, Domestic
This 3/4 in bronze water pressure reducing valve for low pressure ranges. It is designed to reduce incoming water pressure to protect plumbing systems and reduce water consumption for commercial, industrial and residential applications. The easy maintenance assembly consists of a replaceable seat module, double union FNPT inlet and outlet and a bypass feature to control thermal expansion pressure. The temperature range is 33 to 160 deg F. The low pressure range is 10 to 35 psi with the standard setting at 30 psi.
WATTS®, 0009270, Pressure Reducing Valve, Standard Capacity, Series: LF25AUB-Z3, 3/4 in Nominal, Double Union FNPT End Style, 10 to 35 psi Pressure, 33 to 160 deg F, Media: Water, Copper Silicon Alloy Body, EPDM Diaphragm Softgoods, 7 in H Dimensions, Domestic
This 1-1/4 in lead free Y pattern reduced pressure zone assembly is designed to prevent the reverse flow of high hazard (toxic) fluids found in the water from entering into the potable water supply due to backsiphonage and or backpressure in accordance with national plumbing codes and water authority requirements. It is used in water services to industrial plants, hospitals, morgues, mortuaries and chemical plants and is also used in irrigation systems, boiler feed, water lines and other installations requiring maximum protection. This assembly consists of a lead free body, threaded quarter turn ball valves, test cocks, spring loaded Y pattern check valves and one hydraulically dependent differential relief valve.
Febco®, 0683008, Reduced Pressure Zone Assembly, Y-Pattern, Series: LF825Y, 1-1/4 in Nominal, Thread End Style, 175 psi Pressure, 32 to 140 deg F, Quarter-Turn Ball Valve Ball Valve/Gate Valve, Full Port, Cast Copper Silicon Alloy Body, Import
Series 740 Boiler Pressure Relief Valves are used in hot water space heating boiler applications to protect against excessive pressure on all types of hot water space heating boiler equipment. It consists of a iron body construction with expanded outlet drain connections for hot water space heating boilers, non-metallic disc-to-metal seating, stainless steel spring, and test lever. Series 740 offers large discharge capacity, resists corrosive water conditions, resists sticking and freezing, and prevents water and sediment from being trapped in the seat. It is designed for emergency safety relief and shall not be used as an operating control. Pressure Range: 30 to 75psi (2 to 5 bar) with corresponding high ratings from 925,000 to 10,700,000 BTU/hr.
WATTS®, 0384242, Pressure Relief Valve, Series: 740, 2 in Nominal, FNPT End Style, 45 psi Pressure, 250 deg F, Media: Water, Iron Body, Domestic
This 5 in copper float is used with a float valve in a control assembly that provides make up water for pressure washers, cooling towers, heat transfer units, livestock watering tanks and refrigeration units. This float is made of high grade copper with firmly bonded overlapping joints and has a 1/4-20 female thread connection. The maximum working temperature is 200 deg F.
WATTS® Float, Heavy Duty, 5 in Float Width, Round Float, FNPT, 1/4-20 Thread, Copper, Domestic
Series 174A Boiler Pressure Relief Valves are used in hot water heating and domestic supply boiler applications to protect against excessive pressures on all types of hot water heating supply boiler equipment. It consists of a bronze body construction with NPT threaded female inlet and NPT threaded female outlet (drain) connections, non-metallic disc-to-metal seating, stainless steel spring, and test lever. Series 174A resists corrosive water conditions, sticking and freezing, and prevents water and sediment from being trapped in the seat. It is designed for emergency safety relief and shall not be used as an operating control.
WATTS®, 0274836, Pressure Relief Valve, Series: 174A, 3/4 in Nominal, FNPT End Style, 30 to 150 psi Pressure, 250 deg F, Media: Water, Bronze Body, 2-3/4 in L x 4-1/2 in H Dimensions, Domestic
This replacement ultraviolet quartz sleeve is for the 2 gallons per minute ultraviolet water filtration system. The quartz sleeve protects the bulb and maintains a proper bulb temperature. The sleeve doesn't need to be replaced unless it is broken, but must be cleaned several times a year to keep the bulb effective in delivering high water quality.
WATTS® Replacement Quarts Sleeve, Series: PWUV, For Use With: PWUV Series UV Disinfection System, Import
This replacement ultraviolet lamp is for the 2 gallons per minute ultraviolet water filtration system. This lamp is used in a ultraviolet purifications source which is enclosed in a protective transparent sleeve. The lamp is mounted such that the water passing through a flow chamber is exposed to the UV-C light rays. It is essential that you change your ultraviolet lamp annually. The ability of the lamp to emit ultraviolet light decreases over one year in operation. This lamp is rated at 9000 hours of continual use.
WATTS® UV Replacement Lamp, Series: PWUV, 14 in Length, 9000 hr Life Hours, 4-Pin Base, Import
This replacement ultraviolet ballast is designed for use with the 2 gallons per minute SmartStream™ A Series ultraviolet water filtration system, 110v U.S. The electric ballast is required to control the starting and operating of the ultraviolet light and to regulate the amount of current that passes through it.
WATTS® Replacement Ballast, For Use With: SmartStream® Series A Model 7100671 Commercial/Industrial Ultraviolet System, 24 VAC, Import
Series 174A Boiler Pressure Relief Valves are used in hot water heating and domestic supply boiler applications to protect against excessive pressures on all types of hot water heating supply boiler equipment. It consists of a bronze body construction with NPT threaded female inlet and NPT threaded female outlet (drain) connections, non-metallic disc-to-metal seating, stainless steel spring, and test lever. Series 174A resists corrosive water conditions, sticking and freezing, and prevents water and sediment from being trapped in the seat. It is designed for emergency safety relief and shall not be used as an operating control.
WATTS®, 0275054, Pressure Relief Valve, Series: 174A, 1 in Nominal, FNPT End Style, 30 to 150 psi Pressure, 250 deg F, Media: Water, Bronze Body, 3 in L x 5-3/4 in H Dimensions, Domestic
This Kwik-Change four stage reverse osmosis annual replacement filter 4 pack includes one Kwik-Change sediment red label filter, one Kwik-Change carbon block yellow label filter, one Kwik-Change 60 gallon per day reverse osmosis membrane and one Kwik-Change granular activated carbon blue label filter. The sediment filter traps sediment and other particulate matter, such as dirt, silt and rust which affect the taste and appearance of the water. This filter is designed to be changed out every 6 months or every 1,350 gallons. The five micron carbon block filter reduces chlorine, objectionable tastes and odors. The 50 gallons per day semi permeable membrane effectively reduces total dissolved solids and sodium as well as a wide range of contaminants such as arsenic, lead, perchlorate, chromium, copper, radium and protozoan cysts, giardia and cryptosporidium. The heart of the reverse osmosis system reduces impurities down to 1/10,000 of a micron.
WATTS®, 7100117, Pressure Relief Control Valve, Series: PWFPK4KC4, 13 in Diameter, Carbon, Import
This Kwik-Change UF3 and 4 stage reverse osmosis semi-annual replacement filter 2 pack includes one Kwik-Change sediment red label filter and one Kwik-Change carbon block yellow label filter. The sediment filter traps sediment and other particulate matter, such as dirt, silt and rust which affect the taste and appearance of the water. The 5 Micron filtration rating is in the particle filtration category and is equivalent in size to milled flour. This filter is designed to be changed out every 6 months or every 1,350 gallons. The five micron carbon block filter reduces chlorine, objectionable tastes and odors.
Features
High quality Kwik-Change sediment filter identified by red label
Two pack filter change
High quality Kwik-Change membrane
High quality Kwik-Change carbon block identified by yellow label
This 1 IN 800M4 vent repair kit provides all the parts necessary to repair the vent float of the applicable pressure vacuum breaker. This kit includes a float vent disc assembly and bonnet O-ring. All parts are genuine and original to the valve.
Series 152A Process Steam Pressure Regulators are used in commercial, industrial, and institutional applications to regulate steam pressure in autoclaves, steam tables/irons, vulcanizes and large capacity process services. It is highly sensitive to reduced pressure changes. It consists of an iron body construction with NPT threaded female inlet and outlet connections, stainless steel strainer, laminated metal diaphragm, and sensitivity adjustment feature for critical flow. Series 152A offers full volume with minimum pressure drop and in-line serviceability. It is ideal for use on sterilizers, process lines, testing fixtures, and oil lines. Tight seating Model 152A-T available for dead end and liquid services. Maximum Supply Pressure: Up to 200 psi (13.8 bar).
WATTS®, 0830928, Process Steam Pressure Regulator, Series: 152A, 3/4 in Nominal, FNPT End Style, 200 psi Pressure, 400 deg F, Iron Body, Media: Liquid/Steam/Air, Stainless Steel Trim, 6 in W Dimensions, Domestic
This 3/4 in double check valve assembly is designed to prevent the backflow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure in accordance with national plumbing codes and water authority requirements. Its compact modular design facilitates easy maintenance with a single access cover for in-line repairs. It is ideal for protection in continuous pressure piping applications and at cross-connections identified as non-health hazards and for contaminants at the service line entrance. This assembly consists of a bronze body construction, NPT end connections, quarter turn ball valve shutoffs, top mounted test cocks, two in-line independent positive seating check modules, captured springs and replaceable check discs and seats.
Febco®, 1112, Double Check Valve Assembly, In-Line Small Diameter, Series: 850, 3/4 in Nominal, NPT End Style, 175 psi Pressure, 32 to 140 deg F, Quarter-Turn Ball Valve Ball Valve/Gate Valve, Bronze Body, 10-3/4 in L Dimensions, Import
This 1/4 in lead free full port test cock is used for testing 1-1/4 to 2 in lead free backflow preventer, as an isolation valve for gauges or as a balancing valve for gauges. It features a lead free body construction, low pressure drop, PTFE steam packing seal, thrust washer and seat.
Febco®, 781075LL, Test Cock, 1/4 Turn, Series: LFTC1, For Use With: Backflow Preventers or Isolation Valve, Specifications: 1/4 in MNPT x 1/4 in FNPT, Cast Copper Silicon Alloy, Import
This 4 in, class 150, WATTS® pressure reducing control valve with low flow by-pass, model 115-74, is designed to automatically reduce a fluctuating higher inlet pressure to a constant lower downstream pressure regardless of varying flow rates. A Flow rate below the normal range of the main line pressure reducing control valve is handled by a separate, valve mounted, direct acting low flow by-pass pressure reducing valve.
WATTS® Pressure Reducing Control Valve, Globe Pattern, Series: Classic LFF115-74, 4 in Nominal, Flanged, 250 psi, 150 lb, 160 deg F, Media: Water, 15 in Inlet to Outlet Length, Ductile Iron Body, EPDM Disc/Stainless Steel Seat Trim, Buna-N, Fusion Bonded Epoxy Coated
This 14 in lead free frost proof automatic draining wall hydrant is used in commercial and residential applications to provide freeze protection for the external water supply. Designed for easy field service with a replaceable bibb washer to allow for repair inline without removing sill cock from the water line. It also includes a lead free brass vacuum breaker to provide backflow protection to the potable water supply. This wall hydrant consists of a lead free brass body with nickel plated finish, 0.8 mm thick copper tube, allows for 1/2 in solder or male IPS inlet, 3/4 in hose outlet, and a steel hand wheel.
WATTS® Wall Hydrant, Frost-Proof Automatic Self-Draining, Series: LFFHB, 1/2 x 3/4 in Nominal, Solder/MNPT Inlet x Male Garden Hose Thread Outlet, 14 in Wall Thickness, Cross Hand Wheel Handle, Brass, Nickel Plated, Import
This bonnet and poppet assembly kit includes the parts necessary to repair or replace the bonnet and poppet assembly of a 1 and 1-1/4 in pressure vacuum breaker. This kit consists of bonnet, O-ring, spring, E-ring, washer, stem, rubber disc and poppet. All parts are genuine and original to the valve.
Febco® Bonnet/Poppet Kit, For Use With: Model 765 1 in and 1-1/4 in Pressure Vacuum Breaker Valve, Import
This 3/4 and 1 IN 009 second check repair kit provides all the parts necessary to replace the major internal components of the applicable reduced pressure zone assembly. The check kit consists of the check assembly and cover O-ring. All parts are genuine and original to the valve.
WATTS® Second Check Kit, For Use With: Model 009/LF009 3/4 to in Reduced Pressure Zone Assembly
Series 740 Boiler Pressure Relief Valves are used in hot water space heating boiler applications to protect against excessive pressure on all types of hot water space heating boiler equipment. It consists of a iron body construction with expanded outlet drain connections for hot water space heating boilers, non-metallic disc-to-metal seating, stainless steel spring, and test lever. Series 740 offers large discharge capacity, resists corrosive water conditions, resists sticking and freezing, and prevents water and sediment from being trapped in the seat. It is designed for emergency safety relief and shall not be used as an operating control. Pressure Range: 30 to 75psi (2 to 5 bar) with corresponding high ratings from 925,000 to 10,700,000 BTU/hr.
WATTS®, 0382821, Pressure Relief Valve, Series: 740, 1 in Nominal, FNPT End Style, 75 psi Pressure, 250 deg F, Media: Water, Iron Body, Domestic
This 1/2 inch water pressure reducing valve is used in commercial and residential applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption. It consists of a lead free brass body construction, NPT threaded female inlet and NPT female outlet connection, integral stainless steel strainer, thermoplastic seat, bronze sealed spring cage for accessible outdoor waterworks or pit installations and a thermal expansion bypass. The temperature range is 33 to 180 degrees F (0.5 to 82 degrees C). Suitable for up to 400 psi (27.6 bar), the pressure range can be adjusted from 25 to 75 psi (172 to 517 kPa) with the standard setting at 50 psi (345 kPa).
Features
NPT threaded female inlet by NPT female outlet
Integral stainless steel strainer removable for cleaning
Thermoplastic seat and bronze cage
Corrosion-resistant adjusting screw and sealed cage for waterworks pit installations
Welcome back.
Your orders, invoices, and account tools are ready when you are.
