Fits BGL-780-W and BGL-780-S through BGL-1080-W and BGL-1080-S
Search results for
All Products
1,826
products found manufactured by Weil McLain
Relevant Product Categories
Overview
Cast iron sections for better heat transfer and a compact design to save valuable living space. Easily accessible controls, vertical flueways and top cleaning for easy and quick servicing
Features
- Can be installed with atmospheric venting using a chimney; flue size 5 inch
- Can be installed with direct venting using AL29-4C stainless steel vent pipe; flue size 3 inch
- Integrated boiler control module with intermittent electronic ignition system with integrated indicator and diagnostic lights
- Draft inducer assembly with cover
- Water content: 2.7 gallons
- Integrated low water cutoff with test button
- Insulated extended steel jacket
- Two piece top jacket panel
- Cast iron sections with built in air separator
- Stainless steel burners
- Non-linting pilot burner
Old Number 10C406
Fits GV Boilers Series 1 and 2
Fits 1788 and 1888 - Contains: Flue collar assembly, observation port assembly, cleanout plates, elastomer seals, rope, draw rods, and silicone sealant
Fits 1488, 1588, and 1688 - Contains: Flue collar assembly, observation port assembly, cleanout plates, elastomer seals, rope, draw rods, and silicone sealant
Fits Ultra 80 and 105 Boilers
Includes: Pipe, Drain Valve, Cap, and Compression Fitting
Overview
Weil McLain Commercial Oil Boilers provide rugged, reliable and low maintenance heating solutions for light commercial through large institutional applications. Modular jacketing and toolless jacket panels for easy access. 3 inches of insulation (except on front panel) to minimize jacket heat loss and maximize thermal efficiency. The jacket has part number labels on all components for easy assembly. 1/4 inch thick steel cleanout plates with re-usable coated woven fiberglass gasket.
Features
- ASME 80 PSI rated cast iron sections
- Two 5 inch female supply tappings - One 6 inch female return tapping
- No tankless coil section - tankless cannot be added
- This boiler does not come with a burner, but can use a gas burner or oil burner
- Cast iron flue collar with built in breaching damper
- Observation ports on front and back sections
- Includes a flue brush
- Combination high limit and low limit with manual reset control
- Built in air eliminator
Overview
Weil McLain Commercial Oil Boilers provide rugged, reliable and low maintenance heating solutions for light commercial through large institutional applications. Modular jacketing and toolless jacket panels for easy access. 3 inches of insulation (except on front panel) to minimize jacket heat loss and maximize thermal efficiency. The jacket has part number labels on all components for easy assembly. 1/4 inch thick steel cleanout plates with re-usable coated woven fiberglass gasket.
Features
- ASME 80 PSI rated cast iron sections
- Two 5 inch female supply tappings - One 6 inch female return tapping
- No tankless coil section - tankless cannot be added
- This boiler does not come with a burner, but can use a gas burner or oil burner
- Cast iron flue collar with built in breaching damper
- Observation ports on front and back sections
- Includes a flue brush
- Combination high limit and low limit with manual reset control
- Built in air eliminator
Overview
Weil McLain Commercial Oil Boilers provide rugged, reliable and low maintenance heating solutions for light commercial through large institutional applications. Modular jacketing and toolless jacket panels for easy access. 3 inches of insulation (except on front panel) to minimize jacket heat loss and maximize thermal efficiency. The jacket has part number labels on all components for easy assembly. 1/4 inch thick steel cleanout plates with re-usable coated woven fiberglass gasket.
Features
- ASME 80 PSI rated cast iron sections
- Two 5 inch female supply tappings - One 6 inch female return tapping
- No tankless coil section - tankless cannot be added
- This boiler does not come with a burner, but can use a gas burner or oil burner
- Cast iron flue collar with built in breaching damper
- Observation ports on front and back sections
- Includes a flue brush
- Combination high limit and low limit with manual reset control
- Built in air eliminator
Overview
Weil McLain Commercial Oil Boilers provide rugged, reliable and low maintenance heating solutions for light commercial through large institutional applications. Modular jacketing and toolless jacket panels for easy access. 3 inches of insulation (except on front panel) to minimize jacket heat loss and maximize thermal efficiency. The jacket has part number labels on all components for easy assembly. 1/4 inch thick steel cleanout plates with re-usable coated woven fiberglass gasket.
Features
- ASME 80 PSI rated cast iron sections
- Two 5 inch female supply tappings - One 6 inch female return tapping
- No tankless coil section - tankless cannot be added
- This boiler does not come with a burner, but can use a gas burner or oil burner
- Cast iron flue collar with built in breaching damper
- Observation ports on front and back sections
- Includes a flue brush
- Combination high limit and low limit with manual reset control
- Built in air eliminator
Overview
Weil McLain Commercial Oil Boilers provide rugged, reliable and low maintenance heating solutions for light commercial through large institutional applications. Modular jacketing and toolless jacket panels for easy access. 3 inches of insulation (except on front panel) to minimize jacket heat loss and maximize thermal efficiency. The jacket has part number labels on all components for easy assembly. 1/4 inch thick steel cleanout plates with re-usable coated woven fiberglass gasket.
Features
- ASME 80 PSI rated cast iron sections
- Two 5 inch female supply tappings - One 6 inch female return tapping
- No tankless coil section - tankless cannot be added
- This boiler does not come with a burner, but can use a gas burner or oil burner
- Cast iron flue collar with built in breaching damper
- Observation ports on front and back sections
- Includes a flue brush
- Combination high limit and low limit with manual reset control
- Built in air eliminator
Fits Ultra 3, 3UE and CT Boilers Series 3
Fits Ultra 3, 3UE, and CT Boilers Series 3
Features
- 28,000 to 155,000 BTU input - 143,000 BTU heating capacity - 95.1% AFUE
- Stainless steel heat exchanger - LP when conversion kit is used - Circulator cannot be removed for other uses
- Stainless steel burners - Direct spark ignition - Low water protection
- Variable speed blower assembly - Fully removable jacket front
- Outdoor reset - Condensate trap
- 3-1/2" LCD display - Three boiler priorities with optional domestic hot water priority
Features
- 22,000 to 110,000 BTU input - 101,000 BTU heating capacity - 95.0% AFUE
- Stainless steel heat exchanger - LP when conversion kit is used - Circulator cannot be removed for other uses
- Stainless steel burners - Direct spark ignition - Low water protection
- Variable speed blower assembly - Fully removable jacket front
- Built in expansion tank - Outdoor reset - Condensate trap
- 3-1/2" LCD display - Three boiler priorities with optional domestic hot water priority
Features
- Mounts underneath WM97+ boiler - 18.2 gallon 316L stainless steel tank - Thermostatic mixing valve
- 1-1/4" diameter 304 stainless steel coil - 3/4" temperature and pressure relief valve
- Taco 3 speed circulator with selector switch - Two 1" 316L flexible stainless steel connection hoses
- Wire harness and plugs for quick boiler control connection
- Two tank temperature sensors - leveling legs
Old Number 117-124-330
Features
- 495,000 BTU Input - 382,000 BTU Output - 82.52% AFUE
- Combination gas valve and regulator - stainless steel burners
- Non-linting pilot burner - LP if conversion kit is used
- Available in steam only
- Factory assembled section block - horizontal to vertical draft hood
- High efficiency model PI intermittent electronic ignition
- Insulated extended steel jacket
Old Number 117-114-330
Features
- 450,000 BTU Input - 347,000 BTU Output - 82.48% AFUE
- Combination gas valve and regulator - stainless steel burners
- Non-linting pilot burner - LP if conversion kit is used
- Available in steam only
- Factory assembled section block - horizontal to vertical draft hood
- High efficiency model PI intermittent electronic ignition
- Insulated extended steel jacket
Features
- 360,000 BTU Input - 278,000 BTU Output - 82.39% AFUE
- Combination gas valve and regulator - stainless steel burners
- Non-linting pilot burner - LP if conversion kit is used
- Available in steam only
- Factory assembled section block - horizontal to vertical draft hood
- High efficiency model PI intermittent electronic ignition
- Insulated extended steel jacket
Features
Old Number 117-084-330
- 315,000 BTU Input - 243,000 BTU Output - 82.34% AFUE
- Combination gas valve and regulator - stainless steel burners
- Non-linting pilot burner - LP if conversion kit is used
- Available in steam only
- Factory assembled section block - horizontal to vertical draft hood
- High efficiency model PI intermittent electronic ignition
- Insulated extended steel jacket
Overview
Weil McLain Commercial Oil Boilers provide rugged, reliable and low maintenance heating solutions for light commercial through large institutional applications. Modular jacketing and toolless jacket panels for easy access. 3 inches of insulation (except on front panel) to minimize jacket heat loss and maximize thermal efficiency. The jacket has part number labels on all components for easy assembly. 1/4 inch thick steel cleanout plates with re-usable coated woven fiberglass gasket.
Features
- ASME 80 PSI rated cast iron sections
- Three 5 inch female supply tappings - One 6 inch female return tapping
- No tankless coil section - tankless cannot be added
- This boiler does not come with a burner, but can use a gas burner or oil burner
- Cast iron flue collar with built in breaching damper
- Observation ports on front and back sections
- Includes a flue brush
- Low limit and high limit pressure controls
- Steam pressure gauge siphon, gauge cocks, gauge glass and guards
Features
- 100,000 BTU input - 83,000 BTU heating capacity - 82.9% AFUE
- Integrated boiler control module with Intermittent electronic ignition system and indicator/diagnostic lights
- Plug in connectors and wiring - Cannot be converted to LP
- Cast iron sections - Stainless steel burners
- Insulated steel jacket
- Vertical draft hood - spill switch - Rollout Thermal Fuse
Old Number 10C110
>p>Robertshaw Part Number: 5A7-501-723Fits PFG Series 3 through 7 with Standing Pilot
Overview
Cast iron sections for better heat transfer and a compact design to save valuable living space. Factory assembled block for ease of assembly
Features
- Cannot be converted to LP gas
- Tankless coil cannot be added (No tankless opening section)
- Two 3 inch female supply tappings
- Two 2-1/2 inch female return tappings
- Intermittent electronic ignition system with UCM universal ignition control module and indicator and diagnostic lights
- Water content: 22.3 gallons
- Insulated extended jacket
- Horizontal to vertical draft hood
- Automatic vent damper
- Non-linting pilot burner
- Stainless steel burners
- Integrated low water cutoff with test button
Fits WM97+ 70 and WM97+ 110
Includes: Supply and Return Sensors, Gas Valve, Flue Sensor, Low Water Cut Off, and Blower Control
Includes: Front panel, back panel, right side panel, left side tankless coil panel, corner pieces, bottom bracket (sizes 1088 1888), top right bracket, top left bracket, bottom channels, top panel,channel, front bottom channel, back bottom channel, front top channel, back top channel, side top trim pieces, front top trim and back top trim
Includes: Front panel, back panel, right side panel, left side tankless coil panel, corner pieces, bottom bracket (sizes 1088 1888), top right bracket, top left bracket, bottom channels, top panel,channel, front bottom channel, back bottom channel, front top channel, back top channel, side top trim pieces, front top trim and back top trim
Includes: Front panel, back panel, right side panel, left side tankless coil panel, corner pieces, bottom bracket (sizes 1088 1888), top right bracket, top left bracket, bottom channels, top panel,channel, front bottom channel, back bottom channel, front top channel, back top channel, side top trim pieces, front top trim and back top trim
Includes: Front panel, back panel, right side panel, left side tankless coil panel, corner pieces, bottom bracket (sizes 1088 1888), top right bracket, top left bracket, bottom channels, top panel,channel, front bottom channel, back bottom channel, front top channel, back top channel, side top trim pieces, front top trim and back top trim
Includes: Front panel, back panel, right side panel, left side tankless coil panel, corner pieces, bottom bracket (sizes 1088 1888), top right bracket, top left bracket, bottom channels, top panel,channel, front bottom channel, back bottom channel, front top channel, back top channel, side top trim pieces, front top trim and back top trim