Fits Ultra Boiler Series 1 and 2
Includes: Electrical Box and Relays
Search results for
All Products
1,826
products found manufactured by Weil McLain
Relevant Product Categories
Fits BGL-1180-W, BGL-1180-S, BGL-1280-W, and BGL-1280-S with Power Flame WCR2-GO-15 Oil/Natural Gas Burner
Fits BGL-1180-W, BGL-1180-S, BGL-1280-W and BGL-1280-S
Fits BGL-688-W, BGL-688-S, BGL-788-W and BGL-788-S
240 volts - Single phase - Side Scan UV Detector - Low/Hi/Off controls
Fits Ultra Oil UO-3E, UO-4E, and UO-5E
Overview
It's not uncommon for cast iron boilers to last in excess of 40 years. Ultra Oil features a commercial grade heat exchanger with thick cast iron walls for durability and product longevity. It also features a three pass design concept that has been used by Weil McLain for over 70 years, because it provides better flame control and more efficient fuel utilization, which reduces heating costs. Strategically designed flueway fins increase the heat transfer surface area, which extracts more heat and increases efficiency without penalizing boiler back pressure. The wider flueways decrease the negative impact of fouling. An added benefit of the three pass design is the horizontal configuration, which makes virtually all of the combustion chamber, turnaround, and flueways visible from the front of the boiler for easy cleaning and maintenance. Silicone coated fiberglass rope insures a positive seal. Revolutionary rear section design directs the flue gas flow into the flueways without sacrificing pressure drop through the inner and the outer flueways which eliminates the need for a rear refractory. Ultra Oil features a full access, reversible swing away burner door, which exposes virtually the entire combustion area and all flue ways for simplified inspection, cleaning, and maintenance. This design also incorporates a mounting bracket that can be installed on either the left or right side of the front section for installation in small, confined spaces and corners. Ultra Oil has a modern appearance that combines appliance like design features for placement in high traffic living spaces, with easy serviceability for the contractor. The top mounted hinged control POD includes a factory installed external service switch and temperature / pressure gauge for easy viewing. The unique, angled POD provides control system protection from dirt, moisture and temperature fluctuations, and includes a combination temperature control and low water cutoff. Factory assembled, pre-wired terminal strips simplify field wiring of incoming power, mounted circulators and additional limit controls that may be required by local codes.
Features
- This boiler is direct vent only
- Vent termination kit 386-902-010 and 15 foot flexible insulated vent pipe 386-902-012 are required (Sold separately)
- Water content: 21.50 gallons
- Snap on front jacket panel allows easy entry to the full access burner door
- Left and right side jacket panels are interchangeable
- All piping, wiring and venting connections are located in the rear of the boiler
- The burner door is removeable
- A quick disconnect plug cuts burner power when the burner door is open
- Factory wired terminal strips with labeled wires
Overview
It's not uncommon for cast iron boilers to last in excess of 40 years. Ultra Oil features a commercial grade heat exchanger with thick cast iron walls for durability and product longevity. It also features a three pass design concept that has been used by Weil McLain for over 70 years, because it provides better flame control and more efficient fuel utilization, which reduces heating costs. Strategically designed flueway fins increase the heat transfer surface area, which extracts more heat and increases efficiency without penalizing boiler back pressure. The wider flueways decrease the negative impact of fouling. An added benefit of the three pass design is the horizontal configuration, which makes virtually all of the combustion chamber, turnaround, and flueways visible from the front of the boiler for easy cleaning and maintenance. Silicone coated fiberglass rope insures a positive seal. Revolutionary rear section design directs the flue gas flow into the flueways without sacrificing pressure drop through the inner and the outer flueways which eliminates the need for a rear refractory. Ultra Oil features a full access, reversible swing away burner door, which exposes virtually the entire combustion area and all flue ways for simplified inspection, cleaning, and maintenance. This design also incorporates a mounting bracket that can be installed on either the left or right side of the front section for installation in small, confined spaces and corners. Ultra Oil has a modern appearance that combines appliance like design features for placement in high traffic living spaces, with easy serviceability for the contractor. The top mounted hinged control POD includes a factory installed external service switch and temperature / pressure gauge for easy viewing. The unique, angled POD provides control system protection from dirt, moisture and temperature fluctuations, and includes a combination temperature control and low water cutoff. Factory assembled, pre-wired terminal strips simplify field wiring of incoming power, mounted circulators and additional limit controls that may be required by local codes.
Features
- This boiler is direct vent only
- Vent termination kit 386-902-010 and 15 foot flexible insulated vent pipe 386-902-012 are required (Sold separately)
- Water content: 18.25 gallons
- Snap on front jacket panel allows easy entry to the full access burner door
- Left and right side jacket panels are interchangeable
- All piping, wiring and venting connections are located in the rear of the boiler
- The burner door is removeable
- A quick disconnect plug cuts burner power when the burner door is open
- Factory wired terminal strips with labeled wires
Fits Ultra Oil UO-3E, UO-4E and UO-5E
Overview
It's not uncommon for cast iron boilers to last in excess of 40 years. Ultra Oil features a commercial grade heat exchanger with thick cast iron walls for durability and product longevity. It also features a three pass design concept that has been used by Weil McLain for over 70 years, because it provides better flame control and more efficient fuel utilization, which reduces heating costs. Strategically designed flueway fins increase the heat transfer surface area, which extracts more heat and increases efficiency without penalizing boiler back pressure. The wider flueways decrease the negative impact of fouling. An added benefit of the three pass design is the horizontal configuration, which makes virtually all of the combustion chamber, turnaround, and flueways visible from the front of the boiler for easy cleaning and maintenance. Silicone coated fiberglass rope insures a positive seal. Revolutionary rear section design directs the flue gas flow into the flueways without sacrificing pressure drop through the inner and the outer flueways which eliminates the need for a rear refractory. Ultra Oil features a full access, reversible swing away burner door, which exposes virtually the entire combustion area and all flue ways for simplified inspection, cleaning, and maintenance. This design also incorporates a mounting bracket that can be installed on either the left or right side of the front section for installation in small, confined spaces and corners. Ultra Oil has a modern appearance that combines appliance like design features for placement in high traffic living spaces, with easy serviceability for the contractor. The top mounted hinged control POD includes a factory installed external service switch and temperature / pressure gauge for easy viewing. The unique, angled POD provides control system protection from dirt, moisture and temperature fluctuations, and includes a combination temperature control and low water cutoff. Factory assembled, pre-wired terminal strips simplify field wiring of incoming power, mounted circulators and additional limit controls that may be required by local codes.
Features
- This boiler is direct vent only
- Vent termination kit 386-902-010 and 15 foot flexible insulated vent pipe 386-902-012 are required (Sold separately)
- Water content: 15 gallons
- Snap on front jacket panel allows easy entry to the full access burner door
- Left and right side jacket panels are interchangeable
- All piping, wiring and venting connections are located in the rear of the boiler
- The burner door is removeable
- A quick disconnect plug cuts burner power when the burner door is open
- Factory wired terminal strips with labeled wires
Overview
It's not uncommon for cast iron boilers to last in excess of 40 years. Ultra Oil features a commercial grade heat exchanger with thick cast iron walls for durability and product longevity. It also features a three pass design concept that has been used by Weil McLain for over 70 years, because it provides better flame control and more efficient fuel utilization, which reduces heating costs. Strategically designed flueway fins increase the heat transfer surface area, which extracts more heat and increases efficiency without penalizing boiler back pressure. The wider flueways decrease the negative impact of fouling. An added benefit of the three pass design is the horizontal configuration, which makes virtually all of the combustion chamber, turnaround, and flueways visible from the front of the boiler for easy cleaning and maintenance. Silicone coated fiberglass rope insures a positive seal. Revolutionary rear section design directs the flue gas flow into the flueways without sacrificing pressure drop through the inner and the outer flueways which eliminates the need for a rear refractory. Ultra Oil features a full access, reversible swing away burner door, which exposes virtually the entire combustion area and all flue ways for simplified inspection, cleaning, and maintenance. This design also incorporates a mounting bracket that can be installed on either the left or right side of the front section for installation in small, confined spaces and corners. Ultra Oil has a modern appearance that combines appliance like design features for placement in high traffic living spaces, with easy serviceability for the contractor. The top mounted hinged control POD includes a factory installed external service switch and temperature / pressure gauge for easy viewing. The unique, angled POD provides control system protection from dirt, moisture and temperature fluctuations, and includes a combination temperature control and low water cutoff. Factory assembled, pre-wired terminal strips simplify field wiring of incoming power, mounted circulators and additional limit controls that may be required by local codes.
Features
- This boiler is chimney vent only
- Water content: 21.50 gallons
- Snap on front jacket panel allows easy entry to the full access burner door
- Left and right side jacket panels are interchangeable
- All piping, wiring and venting connections are located in the rear of the boiler
- The burner door is removeable
- A quick disconnect plug cuts burner power when the burner door is open
- Factory wired terminal strips with labeled wires
- Includes barometric damper
Overview
It's not uncommon for cast iron boilers to last in excess of 40 years. Ultra Oil features a commercial grade heat exchanger with thick cast iron walls for durability and product longevity. It also features a three pass design concept that has been used by Weil McLain for over 70 years, because it provides better flame control and more efficient fuel utilization, which reduces heating costs. Strategically designed flueway fins increase the heat transfer surface area, which extracts more heat and increases efficiency without penalizing boiler back pressure. The wider flueways decrease the negative impact of fouling. An added benefit of the three pass design is the horizontal configuration, which makes virtually all of the combustion chamber, turnaround, and flueways visible from the front of the boiler for easy cleaning and maintenance. Silicone coated fiberglass rope insures a positive seal. Revolutionary rear section design directs the flue gas flow into the flueways without sacrificing pressure drop through the inner and the outer flueways which eliminates the need for a rear refractory. Ultra Oil features a full access, reversible swing away burner door, which exposes virtually the entire combustion area and all flue ways for simplified inspection, cleaning, and maintenance. This design also incorporates a mounting bracket that can be installed on either the left or right side of the front section for installation in small, confined spaces and corners. Ultra Oil has a modern appearance that combines appliance like design features for placement in high traffic living spaces, with easy serviceability for the contractor. The top mounted hinged control POD includes a factory installed external service switch and temperature / pressure gauge for easy viewing. The unique, angled POD provides control system protection from dirt, moisture and temperature fluctuations, and includes a combination temperature control and low water cutoff. Factory assembled, pre-wired terminal strips simplify field wiring of incoming power, mounted circulators and additional limit controls that may be required by local codes.
Features
- This boiler is chimney vent only
- Water content: 18.25 gallons
- Snap on front jacket panel allows easy entry to the full access burner door
- Left and right side jacket panels are interchangeable
- All piping, wiring and venting connections are located in the rear of the boiler
- The burner door is removeable
- A quick disconnect plug cuts burner power when the burner door is open
- Factory wired terminal strips with labeled wires
- Includes barometric damper
Overview
This boiler is packaged, wired and assembled at the factory. Cast iron sections for better heat transfer. Includes an automatic vent damper for higher efficiencies and reduced fuel consumption. Easy to access controls for easy servicing.
Features
- Intermittent electronic ignition system with UCM universal ignition control module
- Insulated extended jacket
- Horizontal to vertical draft hood
- Automatic vent damper
- Non-linting pilot burner
- Two 3 inch female supply tappings
- Two 2-1/2 inch female return tappings
- Stainless steel burners
- Electrode type low water cutoff
- Gauge glass and valves
Overview
This boiler is packaged, wired and assembled at the factory. Cast iron sections for better heat transfer. Includes an automatic vent damper for higher efficiencies and reduced fuel consumption. Easy to access controls for easy servicing.
Features
- Intermittent electronic ignition system with UCM universal ignition control module
- Insulated extended jacket
- Horizontal to vertical draft hood
- Automatic vent damper
- Non-linting pilot burner
- Two 3 inch female supply tappings
- Two 2-1/2 inch female return tappings
- Stainless steel burners
- Electrode type low water cutoff
- Gauge glass and valves
Features
- 150,000 BTU input - 125,000 BTU heating capacity - 82.9% AFUE
- Intermittent electronic ignition system with UCM universal ignition control module
- Plug in connectors and wiring - Cannot be converted to LP
- Cast iron sections - Stainless steel burners - Automatic vent damper
- Insulated steel jacket
- Vertical draft hood - spill switch - Rollout Thermal Fuse
Overview
This boiler is packaged, wired and assembled at the factory. Cast iron sections for better heat transfer. Includes an automatic vent damper for higher efficiencies and reduced fuel consumption. Easy to access controls for easy servicing.
Features
- Intermittent electronic ignition system with UCM universal ignition control module
- Insulated extended jacket
- Horizontal to vertical draft hood
- Automatic vent damper
- Non-linting pilot burner
- Two 3 inch female supply tappings
- Two 2-1/2 inch female return tappings
- Stainless steel burners
- Electrode type low water cutoff
- Gauge glass and valves
Honeywell Part Number: VR8204A-2019 and VR8204Q-2426
Fits CGs 3 through 6 Boilers
Overview
Weil McLain Commercial Oil Boilers provide rugged, reliable and low maintenance heating solutions for light commercial through large institutional applications. Modular jacketing and toolless jacket panels for easy access. 3 inches of insulation (except on front panel) to minimize jacket heat loss and maximize thermal efficiency. The jacket has part number labels on all components for easy assembly. 1/4 inch thick steel cleanout plates with re-usable coated woven fiberglass gasket.
Features
- ASME 80 PSI rated cast iron sections
- Two 5 inch female supply tappings - One 6 inch female return tapping
- No tankless coil section - tankless cannot be added
- This boiler does not come with a burner, but can use a gas burner or oil burner
- Cast iron flue collar with built in breaching damper
- Observation ports on front and back sections
- Includes a flue brush
- Low limit and high limit pressure controls
- Steam pressure gauge siphon, gauge cocks, gauge glass and guards
Fits CG and CGM LP Boilers
Includes: Main Burner with Pilot Bracket, Pilot Burner, and Thermocouple
Precision Speed Equipment Part Number: E38A2
No tankless heater opening or cover plate - Swing away burner door with full chamber access increases visibility for inspection and servicing - Aluminized steel flue collector hood with flue cap on top outlet - Can be converted to rear outlet - Refractory blanket and target wall - High limit control with circulator relay, low water cut off function, and integrated service switch - Built in air separator - Barometric damper
No tankless heater opening or cover plate - Swing away burner door with full chamber access increases visibility for inspection and servicing - Aluminized steel flue collector hood with flue cap on top outlet - Can be converted to rear outlet - Refractory blanket and target wall - High limit control with circulator relay, low water cut off function, and integrated service switch - Built in air separator - Barometric damper
Old Number 10C683
Fits CGi Boilers Series 1
Honeywell Part Number: L4080B-1386
Fits GV Boilers Series 3 and 4
Old Number 158-124-213
Features
- 1,624,000 BTU input - 1,348,000 BTU heating capacity - This boiler comes with no burner or mounting plate
- Cast iron sections - Insulated flush jacket - Observation ports on front and rear sections
- Steel flue collar and breeching damper - Refractory blanket and target wall in combustion area
- Side cleanout plates - Flue brush - Low limit and high limit pressure controls - Gauge glass set