Fits Ultra Oil Boilers
Honeywell Part Number: L7248L-1030
Search results for
All Products
1,826
products found manufactured by Weil McLain
Relevant Product Categories
Fits CGs Boilers
Includes: Inducer, Fan Assembly, Gasket, and Nuts
Fasco Part Number: 7021-10410-7062-5326
Fits 80 Boiler
Includes: Back Refractory Blanket, Bottom Refractory Blanket, Adhesive, Sealing Rope, and Sealing Rope Adhesive
Overview
Weil McLain takes condensing boiler technology to a higher level of performance. The Ultra Series 4 features a state of the art heat exchanger with nanotechnology coating that works like "Ultra Armor", reducing build up in the heat exchanger while maintaining high efficiency. Nanotechnology is a heat exchanger coating that combines anti-adhesive and anti-corrosion properties, which protects the heat exchanger from corrosion and combustion residue build up. In conventional systems, aggressive exhaust particles can attach to the surface and cause heat exchangers to corrode. Heat transfer is then reduced and the heating system's energy efficiency decreases. With nanotechnology properties, biofilm formation is inhibited and allows residues to be easily carried out of the heat exchanger before they obstruct the flueways. In addition, Ultra Series 4 has an advanced condensate management system that incorporates polypropylene piping to further reduce the impact of condensate. Thanks to our nano-coated heat exchanger, the Ultra Series 4 requires no cleaning for a full five years after installation. When it's time to clean, a simple rinsing of the coated heat exchanger with water does the trick. The Ultra Series 4 is an ideal choice for single family residential applications. Homeowners will appreciate its quiet operation, ease of set up and control, and unmatched comfort while providing immediate payback in energy savings. For light commercial applications, the Ultra Series 4 lets contractors pair boilers in sequence to heat larger buildings. And, it allows you to control multiple boilers from a single control panel. Back-lit LCD display and simple programming buttons make entering and receiving information easy. The homeowner has the ability to view current boiler status, check water and outdoor temperatures, review boiler maintenance schedule and view installing contractor contact information.
Features
- Includes an LP gas orifice for conversion
- 46,000 BTU minimum input - 230,000 BTU maximum input
- 3 inch or 4 inch PVC, CPVC, Polypropylene or Stainless Steel vent pipe (Size depends on length of run)
- Cast aluminum block with nanotechnology coating
- Stainless steel burners
- Variable speed blower assembly
- Venturi mixing system with air silencer
- Direct spark ignition
- Water content: 1.57 gallons
- Fully removable jacket front
- Adjustable boiler legs
- Condensate trap with drain tee assembly
- U-Control Module with 3.5 inch LCD display
Overview
The Weil McLain GV90+ boiler has a durable cast iron primary heat exchanger that extends product life - it is not uncommon for cast iron boilers to last in excess of 40 years. A corrosion resistant stainless steel condensing secondary heat exchanger increases efficiency up to 5% by recouping heat energy from exhaust normally wasted when vented from the building. The extra heat energy is then added and circulated through the baseboard or radiators to efficiently heat the home. Unlike most high efficiency boilers in the industry, the Weil McLain GV90+ has extra-wide waterways (over 2 inches) allowing sludge and debris, often present in older systems, to flow through easily. This limits scale build up, which reduces boiler efficiency, performance and can lead to premature boiler failure. Down fired, counter flow boiler design improves boiler efficiency. The GV90+ offers 5 pass design in the primary heat exchanger and 2 pass design in the secondary heat exchanger maximizing heat transfer and optimizing boiler efficiency. Built in dual circulator strategy provides boiler protection - it can accept low return water temperatures (down to 60 degrees) with no additional mixing valves, pumps, wiring and installation labor. The lower water temperature also allows homeowners the flexibility to add radiant heating for kitchens, baths or other living spaces without the added cost of special return temperature controls.
Features
- LP conversion kit with rating plate
- Water content: 6 gallons
- Cast iron sections with air separator and stainless steel secondary heat exchanger with air separator
- Built in circulator and built in by-pass circulator system circulators cannot be removed or used elsewhere
- Stainless steel burner cone and ring assembly
- Hot surface ignition system
- Blower assembly with observation port
- Insulated extended jacket
- Condensate trap
- Sidewall vent termination kit; (Includes: Inside and outside metal termination plates and hardware)
- Control module with indicator lights
Overview
Weil McLain takes condensing boiler technology to a higher level of performance. The Ultra Series 4 features a state of the art heat exchanger with nanotechnology coating that works like "Ultra Armor", reducing build up in the heat exchanger while maintaining high efficiency. Nanotechnology is a heat exchanger coating that combines anti-adhesive and anti-corrosion properties, which protects the heat exchanger from corrosion and combustion residue build up. In conventional systems, aggressive exhaust particles can attach to the surface and cause heat exchangers to corrode. Heat transfer is then reduced and the heating system's energy efficiency decreases. With nanotechnology properties, biofilm formation is inhibited and allows residues to be easily carried out of the heat exchanger before they obstruct the flueways. In addition, Ultra Series 4 has an advanced condensate management system that incorporates polypropylene piping to further reduce the impact of condensate. Thanks to our nano-coated heat exchanger, the Ultra Series 4 requires no cleaning for a full five years after installation. When it's time to clean, a simple rinsing of the coated heat exchanger with water does the trick. The Ultra Series 4 is an ideal choice for single family residential applications. Homeowners will appreciate its quiet operation, ease of set up and control, and unmatched comfort while providing immediate payback in energy savings. For light commercial applications, the Ultra Series 4 lets contractors pair boilers in sequence to heat larger buildings. And, it allows you to control multiple boilers from a single control panel. Back-lit LCD display and simple programming buttons make entering and receiving information easy. The homeowner has the ability to view current boiler status, check water and outdoor temperatures, review boiler maintenance schedule and view installing contractor contact information.
Features
- Includes an LP gas orifice for conversion
- 21,000 BTU minimum input - 105,000 BTU maximum input
- 2 inch or 3 inch PVC, CPVC, Polypropylene or Stainless Steel vent pipe (Size depends on length of run)
- Cast aluminum block with nanotechnology coating
- Stainless steel burners
- Variable speed blower assembly
- Venturi mixing system with air silencer
- Direct spark ignition
- Water content: .82 gallons
- Fully removable jacket front
- Adjustable boiler legs
- Condensate trap with drain tee assembly
- U-Control Module with 3.5 inch LCD display
Fits CG 7, CG 8 CGA 7, CGA 8 and EG 50, EG 55, PEG 50 and PEG 55 and PFG-5
Old Number 10C083
Effikal Part Number: RVGP-KS-7BKF, RVGP-A-7BKF or RVGP-KS-78KF
Honeywell Part Number: D80D-1082
Johnson Controls Part Number: Q35GH-2
Field Controls Part Number: GVD-7
Old Number 512-200-075 and 10B866
Fits CG and CGM Boilers Series 5 Through 12
Overview
Cast iron sections for better heat transfer and a compact design to save valuable living space. Easily accessible controls, vertical flueways and top cleaning for easy and quick servicing
Features
- Can be installed with atmospheric venting using a chimney; flue size 4 inch
- Can be installed with direct venting using AL29-4C stainless steel; flue size 3 inch
- Integrated boiler control module with intermittent electronic ignition system with integrated indicator and diagnostic lights
- Draft inducer assembly with cover
- Water content: 1.5 gallons
- Integrated low water cutoff with test button
- Insulated extended steel jacket
- Two piece top jacket panel
- Cast iron sections with built in air separator
- Stainless steel burners
- Non-linting pilot burner
Fits 76 and 78 Boilers Series 1
Includes: Frame, Rope, Gasket, Plugs, and Sight Glass
Fits Gold Plus, Ultra Plus and Plus Water Heaters
Includes: Rubber and Copper "O" Rings, and Loctite
Overview
This boiler is packaged, wired and assembled at the factory. Cast iron sections for better heat transfer. Includes an automatic vent damper for higher efficiencies and reduced fuel consumption. Easy to access controls for easy servicing.
Features
- Intermittent electronic ignition system with UCM universal ignition control module
- Insulated extended jacket
- Horizontal to vertical draft hood
- Automatic vent damper
- Non-linting pilot burner
- Two 3 inch female supply tappings
- Two 2-1/2 inch female return tappings
- Stainless steel burners
- Electrode type low water cutoff
- Gauge glass and valves
Overview
Cast iron sections for better heat transfer and a compact design to save valuable living space. Easily accessible controls, vertical flueways and top cleaning for easy and quick servicing
Features
- Integrated boiler control module with intermittent electronic ignition system with integrated indicator and diagnostic lights
- Water content: 2.7 gallons
- Integrated low water cutoff with test button
- Two piece top jacket panel
- Cast iron sections with built in air separator
- Vertical draft hood
- Automatic vent damper
- Stainless steel burners
- Non-linting pilot burner
Overview
The new Weil McLain Aqua Pro non-metallic composite tank construction is ideal for all types of water conditions, especially the harshest environments. There is no anode rod to check and no annual maintenance, along with convenient top connections
Features
- Lightweight, easily maneuvered non-metallic tank
- No anode rod to check, and no annual maintenance
- Convenient top connections
- Seamless tank construction, with no welds
- Digital temperature control
- Removable copper finned high output coil
- Durable brass drain valve
- 2 inch thick foam insulation for low heat loss
Fits SlimFit series 1, 2, and 3
Fits WTGO Front or Rear series 3 only - Fits WTGO Rear series 1 and 2 only - Includes: seals, rope, adhesive, and collector hood fasteners
Overview
Cast iron sections for better heat transfer and a compact design to save valuable living space. Easily accessible controls, vertical flueways and top cleaning for easy and quick servicing
Features
- Can be installed with atmospheric venting using a chimney; flue size 5 inch
- Can be installed with direct venting using AL29-4C stainless steel vent pipe; flue size 3 inch
- Integrated boiler control module with intermittent electronic ignition system with integrated indicator and diagnostic lights
- Draft inducer assembly with cover
- Water content: 2.1 gallons
- Integrated low water cutoff with test button
- Insulated extended steel jacket
- Two piece top jacket panel
- Cast iron sections with built in air separator
- Stainless steel burners
- Non-linting pilot burner
Overview
Cast iron sections for better heat transfer and a compact design to save valuable living space. Easily accessible controls, vertical flueways and top cleaning for easy and quick servicing
Features
- Can be installed with atmospheric venting using a chimney; flue size 4 inch
- Can be installed with direct venting using AL29-4C stainless steel vent pipe; flue size 3 inch
- Integrated boiler control module with intermittent electronic ignition system with integrated indicator and diagnostic lights
- Draft inducer assembly with cover
- Water content: 1.5 gallons
- Integrated low water cutoff with test button
- Insulated extended steel jacket
- Two piece top jacket panel
- Cast iron sections with built in air separator
- Stainless steel burners
- Non-linting pilot burner
Overview
The Weil McLain Evergreen Pro boiler extends comfort levels to every area of your property for the long run. The Evergreen Pro is perfect for residential applications or light commercial and single or multi-unit installations with ZoneStacking up to 24 programmable zones. It's everything you want in heating: quiet operation, aesthetically pleasing design, floor standing or wall mount options, environmental sustainability, heating comfort while optimizing energy savings. The setup wizard efficiently guides the installer through a single or multiple boiler installation in minutes. For the contractor, installer and / or service provider, the Evergreen Pro has an easy to understand graphical user Interface and makes programming and monitoring operations simple. The wiring diagrams provided are clear and easily accessible. The quiet operation of the Evergreen Pro further enhances the sense of "invisible" heat, from multiple in home zones to pool heating. For the homeowner who wants heating comfort while maintaining lower utility bills and reducing their carbon footprint, the Evergreen Pro 220 boiler has earned Energy Star rating, with an impressive 95% AFUE rating. This could qualify the homeowner for local utility rebates, if available. The Evergreen Pro's smooth performance adds to the greener environment sustainability with straightforward, user friendly design with advanced technology. Simple user interface with complex calculations behind the scenes of the required energy to meet system demands is distributed across all the boilers in the network. The system maximizes user's comfort by simultaneously meeting as many system demands as possible: When there are multiple requests on a cascaded boiler system, the control satisfies both local and network heating demands. The built in installation wizard asks direct questions on setup, making customization easy and straightforward. Contextual help is also available on screen.
Features
- Can be converted to LP gas with the optional LP conversion kit (Not included)
- Water content: 4.6 gallons
- Stainless steel fire tube heat exchanger
- Low water cut off with test button
- Outdoor temperature sensor
- Easy setup and installation with control wizard
- Three thermostat inputs
- Four total outputs: 1 - Dedicated boiler circulator output, 3 - additional outputs can be used with circulators, dampers or system auxilliary
- Fully removable jacket door
- Adjustable boiler legs
- Condensate trap
Old Number 10C681
Fits CGa
United Technologies Part Number 1003-513
Honeywell Part Number: VR8204M-2701
Fits CGi 25 and 6 Boilers Series 1
Old Number 10C489
Honeywell Part Number: VR8304P-4348
White-Rodgers Part Number: 36C74-474-S1
Fits CG 7 and 8 Boilers Series 11 and 12
