Search results for
All Products
376
products found manufactured by Grundfos
Relevant Product Categories
The Grundfos CM pump has been created with compactness, flexibility and reliability as its central features. This horizontal multi-stage close-coupled pump is a compact, reliable and quiet pump designed to work in a variety of applications. CM pumps are fitted with mains-operated motors. A Grundfos engineered mechanical shaft seal has been designed to eliminate industry-wide problems with shaft seals sticking where SIC-SIC seal faces are used. The solution builds on both the implementation of a rotation stop on the stationary ring and different surface finishing on both the stationary and rotating rings.
Grundfos Centrifugal Pump, Compact Multi-Stage, Series: CM Series, 24.7 gpm Flow Rate, 1-1/4 in NPT Inlet, 1 in NPT Outlet, 0.992 hp Power, 208 to 230/440 to 480 V, 3.4 to 3.6/1.7 to 1.8 A, 60 Hz Frequency, 3 ph ph, 145 psi Maximum, 3220 to 3370 rpm Motor, 1 Service Factor, (2) 304 Stainless Steel Impeller, Horizontal Mounting, 131 deg F Ambient, IP55 TEFC Enclosure, Cast iron, 11.34 in L x 6.22 in W x 7.52 in H Dimensions
The CRE pump is a CR pump, motor and integrated variable frequency drive. The CRE pump is a system which is able to solve application problems and save energy. The basic CR pump range, which can be applied in almost any industrial solution, is already in itself the broadest range available. Through our modular approach, we have made it even broader. The basic CR pump range is available in four different materials - cast iron, two grades of stainless steel and all-titanium. There are eleven flow sizes, capable of producing up to almost 725 psi pressure and with a variety of shaft seals, rubber materials and supply voltages. Pump parts which are typically vulnerable to difficult liquids or particularly demanding operating conditions can be optimized for their purpose and designed for specific requirements.
Grundfos, 99449288, In-Line Centrifugal E-Pump With Integrated Frequency Converter, 2-Stage, Series: CRE, 55 gpm Flow Rate, 2 in FNPT Inlet, 2 in FNPT Outlet, 1-1/2 hp Power, 230 VAC, 60 Hz Frequency, 3 ph, 362 psi Maximum, (2) 304 Stainless Steel Impeller, Vertical (Zero-U) Mounting, -4 to 250 deg F, TEFC Enclosure, Cast Iron
UPS pumps constitute a complete range of 3-speed circulator pumps, available both in 50 and 60 Hz. The pumps can be used in both open and closed systems. UPS pumps are of the canned rotor type, i.e. pump and motor form an integral unit without a shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.
Grundfos, 96402784, Circulator Pump, Canned Rotor, Series: UPS, 52.5 ft Maximum Head, 800 W Power, 208 to 230 V AC, 1.55 to 2.5 A, 60 Hz Frequency, 3 ph, 145 psi Maximum, 3450 rpm Motor, 304 Stainless Steel Impeller, 140 deg F, IPX4D Enclosure, Ceramic Radial/Carbon Thrust Bearing, 11-5/16 in W x 13-1/2 in H Dimensions
The Grundfos SQ 3 in submersible pumps offer a wide performance range, making it easy to find a model that will suit your individual requirements. The SQ is a compact, 3 in multi-stage centrifugal pump that can be installed in a borehole no larger than the pump itself. With their built-in electronics, SQ pumps are very easy to install and operate, while guaranteeing a reliable water supply at all times. Equipped with permanent magnet motors, these flexible and compact pumps offer excellent efficiency levels and will supply pump heads up to 656 ft (200 m). If the SQ pump is connected to the Grundfos CU 301 control box, it enables the creation of a constant pressure water supply.
Grundfos Submersible Pump, Series: SQ Series, 8.82 gpm, 2 Wires, 7 Stage, 11.51 ft Maximum Suction Lift, 1-1/2 hp, 200/240 VAC, 12.3 A, 50/60 Hz, 1 ph, 10700 rpm Motor, Floating Impeller, 68 deg F, IP68, Thrust Bearing, Stainless Steel
Grundfos range of submersible pumps (SP) is recognized worldwide for its reliable performance, high energy efficiency and long product life. Invented in 1967, the SP pump was the first ever stainless steel submersible pump and to this day it remains the benchmark in the market. SP pumps cover a wide range of applications where efficient water pumping is required, including water supply, irrigation, mining, fountains, reverse osmosis, dewatering, ground water lowering and many more. The new upgraded and extended range of high capacity 4 in submersible pumps which have improved octagonal discharge, cable guard attachment, wear resistance and optimized hydraulics offer increased performance and efficiency.
Grundfos, 10154510, Submersible Pump, Series: SP Series, 14.4 gpm Flow Rate, 3 Wires, 10 Stage, 1 hp Power, 230 VAC, 9.8 A, 60 Hz Frequency, 1 ph, 3450 rpm Motor, 1.4 Service Factor, (10) 304 Stainless Steel Impeller, 68 deg F, IP68 Enclosure, Thrust Bearing, Stainless Steel, 3.98 in Dia x 26.57 in H Dimensions
MAGNA3 - More than a pump With its unrivalled efficiency, all encompassing range and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for engineers and specifiers looking to create high performance systems for buildings. This pump in the Grundfos master class will fit both heating and cooling applications perfectly, making it the obvious choice for almost any building project, old or new. The MAGNA3 is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. The innovative clamp with only one screw enables easy repositioning of the pump head. The MAGNA3 is a pump with no maintenance requirements and with extremely low life cycle cost. The MAGNA3 incorporates a 4-pole synchronous, permanent magnet motor (PM motor). This motor type is characterized by higher efficiency than a conventional asynchronous squirrel cage motor. The pump speed is controlled by an integrated frequency converter. A differential pressure and temperature sensor is incorporated in the pump.
Grundfos Circulator Pump, 101 gpm, 39.37 ft Maximum Head, 16 to 422 W, 208 to 230 VAC, 0.19 to 1.89 A, 60 Hz, 1 ph, 174 psi Maximum, 32 to 104 deg F Ambient, X4D, 8-1/2 in H