For use with 5201-2 or 5203-2 Operators. The Taco Heat-Guard thermostatic valve consists of a straight globe type valve body and
an operator. It is a self contained, wireless, automatic, modulating control valve for use in hot water or two pipe steam space heating
systems. It senses changes in temperature and automatically increases the flow of heat in response to a temperature drop, or
automatically decrease it in response to a temperature rise.It may be used to control baseboard, convectors, and radiators
The 1600 Series has a maximum operating pressure of 175 psi, and a maximum operating temperature of 300 F. Replaceable "cooler running"
bearing cartridge extends bearing life, and with permanently sealed greased lubricated ball bearings it is virtually maintenance free. Pressure tappings
allow for differential pressure readings to be taken across the pump. Dynamically balanced stainless steel impeller assures long life and higher pump
efficiencies. Non corrosive shaft sleeve protects the shaft by preventing contact between the shaft and system fluid eliminating the need for more
expensive corrosion resistant shaft materials. 1600 Series In-Line pumps utilize a Type 21 seal design which facilitates quick and easy
replacement. One size seal fits all models. Flexible coupler absorbs shock, vibration and misalignment that could be transmitted to the cartridge
and motor bearings while also isolating and preventing any motor related noise or vibrations from being transmitted to the system. Resilient
mounted motor insures quiet reliable vibration free operation of the pump. Superior parts flexibility: one cartridge, one seal, and two motor frames
fit all pump models. All 1600 series pumps are factory tested, and are built in accordance with Hydraulic Institute Standards.
Includes boiler and outdoor sensors - Full outdoor boiler reset control - Can control system or circulator - Override of outdoor reset
when DHW tank is calling - Easy to install and set; will not affect boiler’s warranty - Front mounted LED lights for full diagnostic information
Ideal for retrofit applications of just about any hot water boiler - Not a limit control
Compact, space saving design - Powerful close-coupled, maintenance free motor - Superior efficiency, high starting torque - Permanently
lubricated, sealed for life bearings - Rugged 1/2" Stainless Steel Shaft - Carbon/Silicon-Carbide mechanical seal for long life - Universal flange to
flange dimensions; Ideal for retrofits - Anti-Condensate design for chilled water - Dual electrical knock-outs - Dual pressure taps, suction and
discharge
The circulator is designed for a wide range of residential and light commercial higher-head circulating applications. Typical uses
include hydronic heating, radiant in-floor/panel heating and closed-loop solar heating systems, and domestic water recirculation. The
unique replaceable cartridge contains all of the moving parts and allows for easy service, instead of replacing the entire circulator.
Compact, direct-drive, low power consumption design is ideal for high-efficiency jobs. Self lubricating - No mechanical seal - Universal
flange dimensions
Resilient mounted, split phase motor with built-in overload protector - Equipped with sleeve bearings for quiet operation - One piece non-ferrous
impeller - Stainless steel shaft - Rugged bronze sleeve bearing - Two piece carbon/ceramic seal assembly - Durable one piece spring coupling - Every
circulator is operated before shipment
Resilient mounted, split phase motor with built-in overload protector - Equipped with sleeve bearings for quiet operation - One piece non-ferrous
impeller - Stainless steel shaft - Rugged bronze sleeve bearing - Two piece carbon/ceramic seal assembly - Durable one piece spring coupling - Every
circulator is operated before shipment
This versatile NSF 61 and ASSE 1017 mixing valve provides the ultimate performance for domestic hot water applications. The 5000 Sries ASSE 1017 certification allows for domestic hot water storage at temperatures high enough to increase the effective storage capacity of a water heater, kill harmful bacteria and still be delivered at a safe 120 degree F or less. The valves unique design and advanced thermostatic element ensures a stable mixed water temperature thoughout the extended 85-176 degress F range.
Features
ASSE 1017 Listed
Ideal for domestic water distribution points
Suitable for use in potable water
Delievers stable mixed water temperature
Extended mix temperature range of 85-176 degrees F (29-80 degrees C)
11.44 inch standard tube length - Includes 1 - 12-1/4 inch air tube extension and 1 - 6 inch air tube extension - 125 PSIG maximum
pressure - 240 degrees maximum temperature - These all in one drains combine a shutoff valve and tank drain into one unit. When the
handle is turned in tight, the tank line is open. When the handle is backed out until tight, the tank line is closed and the drain is open.
This versatile NSF 61, ASSE 1017, ASSE1070 mixing valve provides the ultimate performance for domestic hot water applications.
The 5120 Series ASSE1017 certification allows for domestic hot water storage at temperatures high enough to increase the effective
storage capacity of a water heater, kill harmful bacteria and still be delivered at a safe 120 F or less. The ASSE 1070 listing allows for
point of use applications within homes, hospitals, schools, nursing homes, public facilities, etc. where a 1070 valve is required.
This versatile NSF 61, ASSE 1017, ASSE1070 mixing valve provides the ultimate performance for domestic hot water applications.
The 5120 Series ASSE1017 certification allows for domestic hot water storage at temperatures high enough to increase the effective
storage capacity of a water heater, kill harmful bacteria and still be delivered at a safe 120 F or less. The ASSE 1070 listing allows for
point of use applications within homes, hospitals, schools, nursing homes, public facilities, etc. where a 1070 valve is required.
This versatile NSF 61, ASSE 1017, ASSE1070 mixing valve provides the ultimate performance for domestic hot water applications.
The 5120 Series ASSE1017 certification allows for domestic hot water storage at temperatures high enough to increase the effective
storage capacity of a water heater, kill harmful bacteria and still be delivered at a safe 120 F or less. The ASSE 1070 listing allows for
point of use applications within homes, hospitals, schools, nursing homes, public facilities, etc. where a 1070 valve is required.
This versatile NSF 61, ASSE 1017, ASSE1070 mixing valve provides the ultimate performance for domestic hot water applications.
The 5120 Series ASSE1017 certification allows for domestic hot water storage at temperatures high enough to increase the effective
storage capacity of a water heater, kill harmful bacteria and still be delivered at a safe 120 F or less. The ASSE 1070 listing allows for
point of use applications within homes, hospitals, schools, nursing homes, public facilities, etc. where a 1070 valve is required.
The Taco 4900 Series Air Separators are designed for the complete elimination of air from closed loop heating and cooling systems
up to a maximum temperature of 240 F and a maximum pressure of 150 psi. The principle on which the Taco 4900 Series Air Separator
is based is a patented and proven method of removing gases from water: the PALL ring process. Minimal pressure loss - Vent can be
closed - Large surface contact area - Protective vent plate - Maximum air removal - Expansion tank connection tapping - No minimum
run of pipe requirement - Bi-directional flow
This versatile mixing valve provides the ultimate performance for domestic hot water applications. The 5000 Series ASSE 1017
certification allows for domestic hot water storage at temperatures high enough to increase the effective storage capacity of a water heater
kill harmful bacteria and still be delivered at a safe 120 F or less. The valves unique design and advanced thermostatic element
ensures a stable mixed water temperature throughout the extended 85 - 176 F range.
Differential Bypass Valves are used to control excess flow velocities that can be created when there is a reduction in the demand for
heat. This reduced heat demand would typically occur as zone thermostats are satisfied and their corresponding zone valves close,
causing the system pump to try and force more water through the remaining zones. By installing a Taco Differential Bypass Valve
between the discharge of the system pump and somewhere before the inlet of the pump, usually on the system return, an
automatically regulated flow path is created. This regulated flow path will prevent unacceptable velocities from being pumped through
the zones that remain open during reduced demand periods. Differential Bypass Valves should also be used to prevent dead heading
of the circulator in systems where parallel piped heat emitters are controlled by thermostatic radiator valves. The Bypass Valve uses an
adjustable spring loaded seat that opens and closes to allow flow through the valve. This opening and closing is based on the system
pressure applied to the valve seat and the set point of the valve.
2 way Injection, 3 way mixing - Operates off constant power or relay end switch - Ball valve design - Manual operation button - Solid
state microprocessor design - Compact design - Easy one handed actuator removal - 125 PSI shutoff pressure - Plug in low voltage
connections - Multi-status LED indicator light - Fail safe mode - Sensors included - Selectable maximum supply temperature (110F,
130F, 150F, or off) - Selectable minimum supply temperature (85F when maximum supply temperature is set to 150F or off )
Adjustable minimum boiler return temperature (120F, 135F, or off ) - Warm weather shutdown (70F or off) - Adjustable heating curve
(0.2-2.2 reset ratio) - Use the Taco Outdoor Reset iSeries Mixing Valves instead of a conventional injection system. With a full featured
outdoor reset control built right into the actuator there is no need for an externally mounted reset control or expensive control valve. The
iSeries valves can also be set up to do zone by zone outdoor reset, providing optimal comfort control for every zone. The direct drive
actuator modulates a 3 way valve that injects different rates of hot water, supplying virtually any water temperature to the heating system.
Working off an adjustable reset ratio, the valve's maximum and minimum system supply temperatures can be adjusted to support all
types of jobs, including staple up radiant floors that require a higher starting temperature. The iSeries valves include an adjustable
boiler protection function which prevents low water temperatures from returning to the boiler. With a multi-status LED indicator light,
plug-in wiring connections and an easy to remove actuator, the installation could not be easier.
This versatile NSF 61, ASSE 1017, ASSE1070 mixing valve provides the ultimate performance for domestic hot water applications.
The 5120 Series ASSE1017 certification allows for domestic hot water storage at temperatures high enough to increase the effective
storage capacity of a water heater, kill harmful bacteria and still be delivered at a safe 120 F or less. The ASSE 1070 listing allows for
point of use applications within homes, hospitals, schools, nursing homes, public facilities, etc. where a 1070 valve is required.
Fits B&G HV and 2 inch - B&G part numbers 189100, 189101, 189102, 189103, 189162, and 189163 - Fits Armstrong S-35 and H-32
Armstrong part number 816549-091
All in one pump and control - Easy to install: Attach 2 included sensors and dial in the desired Delta-T - Snap in replaceable PC board - LED status panel -
Fuse protected - Plug in low voltage wiring terminal - Increases system efficiency - Pump always runs at minimum required speed to eliminate velocity noise
Eliminates need for a pressure by-pass valve - Conserves energy - Achieves system design goals, even when Installed system varies from original design
Pump automatically adjusts to current system conditions - Spend less time figuring out pressure drop (for proper pump sizing) when servicing existing systems.
Pump exercise - Delivers Ideal BTU/hr heat transfer for all styles of emitters
All in one pump and control - Easy to install: Attach 2 included sensors and dial in the desired Delta-T - Snap in replaceable PC board - LED status panel -
Fuse protected - Plug in low voltage wiring terminal - Increases system efficiency - Pump always runs at minimum required speed to eliminate velocity noise
Eliminates need for a pressure by-pass valve - Conserves energy - Achieves system design goals, even when Installed system varies from original design
Pump automatically adjusts to current system conditions - Spend less time figuring out pressure drop (for proper pump sizing) when servicing existing systems.
Pump exercise - Delivers Ideal BTU/hr heat transfer for all styles of emitters
Taco M Series zone valves provide on-off, normally closed control in closed hot water and/or chilled water systems. The valves can be used in a wide variety of heating and cooling applications, primarily designed for use with fan coils, radiators, convectors, air handlers, and radiant applications.
Features
Extremely quiet operation
Manual open layer automatically releases when power is applied
Front diagnostic lights - Simplified wiring - Premium sealed relays - Compact design - Fuse Protected (with spare) - 100% Factory tested
Isolated end switch - Contractor friendly PC board layout - Universal thermostat compatibility - 24 volt power output for hard wired thermostats
Field replaceable transformer - One add on power control plug - Input to override boiler reset if using PC700 when DHW calls for heat - Interface
with all EXP multi-zone controls - UL Approved
The Taco 0011 is specifically designed for high head / medium flow applications in large residential or light commercial closed loop hydronic heating and chilled
water cooling systems. Ideal for high pressure drop boilers, fan coil units, heat exchangers, large radiant heating and heat recovery/geothermal systems. The unique
replaceable cartridge contains all of the moving parts and allows for easy service instead of replacing the entire circulator. Universal flange to flange dimensions
and orientation allows the 0011 to easily replace other models. Compact, low power consumption design makes it ideal for high-efficiency jobs
Compact, space saving design - Powerful close-coupled, maintenance free motor - Superior efficiency, high starting torque - Permanently
lubricated, sealed for life bearings - Rugged 1/2" Stainless Steel Shaft - Carbon/Silicon-Carbide mechanical seal for long life - Universal flange to
flange dimensions; Ideal for retrofits - Anti-Condensate design for chilled water - Dual electrical knock-outs - Dual pressure taps, suction and
discharge
Compact, space saving design - Powerful close-coupled, maintenance free motor - Superior efficiency, high starting torque - Permanently
lubricated, sealed for life bearings - Rugged 1/2" Stainless Steel Shaft - Carbon/Silicon-Carbide mechanical seal for long life - Universal flange to
flange dimensions; Ideal for retrofits - Anti-Condensate design for chilled water - Dual electrical knock-outs - Dual pressure taps, suction and
discharge
The Taco Radiant Mixing Block is a complete injection mixing system. Integral to the unit is a variable speed injection circulator,
constant speed system circulator, air elimination, and the electronics to drive it all. With only four piping connections needed, the RMB
greatly reduces the time and space required for installation. The RMB can be set up to operate as an outdoor reset control or a setpoint
control with or without delta T limiting, creating flexibility never seen before in a single unit.
The Taco 0012 is specifically designed for high flow/medium head applications in large residential and light commercial systems.
This circulator can be used on open loop systems and domestic water circulation. The unique replaceable cartridge contains all of the
moving parts and allows for easy service instead of replacing the entire circulator. Universal flange to flange dimensions and
orientation allows the 0012 to easily replace other models. Compact, low power consumption design makes it ideal for high-efficiency
jobs. The 0012-F4 is a direct replacement for the HV Series
The Taco LeakBreaker is a water heater leak protection device that protects against flood damage from the containment failure of a
water heater. It consists of a control unit, valve with actuator and sensor. This resettable, testable protection device can be installed on any
style water heater to shut off the incoming water supply, preventing additional water flow to a damaged water heater. The multi-color
LED light and audible alarm lets you know the status of LeakBreaker at all times.
Welcome back.
Your orders, invoices, and account tools are ready when you are.
