Designed for automatic collection and removal of condensate from air conditioning, refrigeration and dehumidification equipment when gravity drainage is not possible or pratical. also suitable for high efficiency oil -and gas-fired condensing furnace equipment.
Features
Low profile for limited spaces
Vertical centrifugal pump design
Automatic start, stop and high level water detection (safety overflow switch)
3/8" O.D. barbed discharge adapter with built-in check valve (installed on the pump)
1/4" O.D. barbed discharge adapter (included in the box)
Two inlet openings (one 1.0" and one 1-1/8" diameter)
Safety overflow float activated switch
Two 5" safety overflow switch lead wires
Thermally protected, fan cooled motor
Built-in wall mount tabs
Intermittent liquid temperature up to 120 degrees F
20' shut-off head
6 ft, 3-conductor cable with grounded 3-prong plug (115V and 230V models)
Designed for automatic collection and removal of condensate from air conditioning, refrigeration and dehumidification equipment when gravity drainage is not possible or practical. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment.
Features
1/2 Gallon collection tank
Vertical centrifugal pump design
Automatic start and stop operation
Some models equipped with float (solid polymer) activated switch for automatic high level water detection (safety overflow switch)
For models with safety overflow switch: dual function NO and NC operation (set to NO from factory for equipment shut down connection)
Models equipped with safety overflow switch include two 5" switch lead wires
3/8" O.D. barbed discharge adapter with built-in check valve
Three 1-1/8" diameter inlet openings (two fitted with removable cap plug)
Thermally protected, fan cooled motor
Built-in wall mount tabs on tank
Removable pump float locking tab for safety during transportation (remove at time of installation)
Maximum water temperature: 140 degrees F
6 ft, 3-conductor cable with grounded 3-prong plug
Some models include 20' x 3/8" I.D. vinyl discharge tubing
Designed with a separate pump and reservoir that connect together with a 6 foot length of 1/4 inch ID vinyl tubing and a 6 foot
communication cable - Ultra slim profile - Integral hanging loop - Self priming - Modular terminals - Epoxy filled for resistance to shock,
vibration, moisture, and chemicals
The Asurity® FP-22 Condensate Pump is a 120 volt full-featured condensate pump designed for acidic and high temperature applications. It handles hot condensate water up to 190°F. Innovative features include vibration dampening feet, metal hang tabs, four inlet holes with built in “P” traps, LED indicators, safety overflow switch, check valve, and plug protector.
Diversitech Condensate Furnace Pump, 22 ft Shutoff Head, 120 V AC Electrical Rating, 190 deg F
Designed to be installed below the indoor unit - White snap on/off cover - Accepts standard 5/8 inch drain hose - Extra large reservoir capacity -
Cleanable or replaceable plastic filter accepts water treatment tablet - Epoxy filled for resistance to shock, vibration, moisture, and chemicals
The Asurity® CP-22LP-230 Condensate Pump is a 230 volt pump with 22 ft of lift. Features include vibration dampening feet and motor mounts, four inlet holes, LED display, a float switch and check valve.
Diversitech Condensate Pump, Low Profile, Series: C-22, 22 ft Shutoff Head, 230 V AC Electrical Rating, 160 deg F
The Aspen® Pumps M4R Tank Pump is an automatic condensate removal pump for heating and air conditioning systems. The Aspen® M4R Tank Pump boasts many exciting features, all of which make it one of the best tank pumps in the field with unsurpassed build quality and performance as a standard.
Aspen® Condensate Removal Tank Pump, Automatic, Series: M4R, 135 gph, 20 ft Shutoff Head, 85 W, 115 V AC, 1.6 A, 60 Hz, Surface Mount, 44 dBA, IP24 Enclosure, 11-7/32 in L x 5-21/32 in W x 5-9/32 in H
Little Giant VCMA Series is ideal for collecting, detecting, and the automatic removal of condensate from air conditioning equipment, de-humidifiers, high efficiency furnaces, condensing boilers, and other equipment where an automatic drain pump is required.
Little Giant VCMA Series is ideal for collecting, detecting, and the automatic removal of condensate from air conditioning equipment, de-humidifiers, high efficiency furnaces, condensing boilers, and other equipment where an automatic drain pump is required.
Designed with a separate pump and reservoir that connect together with a 6 foot length of 1/4 inch ID vinyl tubing and a 6 foot
communication cable - Ultra slim profile - Integral hanging loop - Self priming - Modular terminals - Epoxy filled for resistance to shock,
vibration, moisture, and chemicals
The Asurity® ULTRAIQP is the most advanced, intelligent condensate pump available. TMR sensor technology (Tunneling Magnetoresistance) senses water flow and automatically adjusts motor speed, ensuring quiet operation. The pump detects line blockages and increases water pressure to pulse and clear clogs. Its “end-of-season” mode drains water after 30 days of no detection. Equipped with a safety overflow switch, common, run, alarm connections, and 4 LED indicators. The see-through tank allows quick troubleshooting.
Asurity, ULTRAIQP, Condensate Pump, Series: ULTRAIQP, 132 gph Flow Rate, 3/8 in Outlet, 1/30 hp Power, 120 V AC, 60 Hz, 1.9 A Electrical Rating, 1/2 gal Reservoir, Red
The Asurity® PROCP-22S Condensate Pump is a 120 volt pump for standard applications. Includes built-in safety switch, 22 feet of lift, and metal hang tabs.
Asurity, PROCP-22S, Condensate Pump, Ducted, Series: PRO-22, 96 gph Flow Rate, 4.4 in Inlet, 22 ft Shutoff Head, 120 V, 1.9 A, 60 Hz, 1/30 hp Electrical Rating, 1/2 gal Reservoir, 6 ft Power Cord, Motor Mounting, 160 deg F, NEMA 5-15 Plug Enclosure, Black/Red
Designed with the pump and reservoir as one integral unit - Pump clips directly onto the reservoir - Left or right installation - Epoxy filled
for resistance to shock, vibration, moisture, and chemicals - White lineset cover included
Designed for automatic collection and removal of condensate from air conditioning, refrigeration and dehumidification equipment when gravity drainage is not possible or practical. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment.
Features
External test/run lever
Slim footprint
Vertical centrifugal pump design
Automatic start and stop operation
Galvanized steel "quick install" wall mount bracket
Some models equipped with external, float activated switch for automatic high level water detection (safety overflow switch)
For models with safety overflow switch: dual function NO and NC operation (set to NO from factory for equipment shut down connection)
Models equipped with safety overflow switch include two 5" switch lead wires
The Asurity® ULTRACP-22T Condensate Pump is a 120 volt pump with 22 ft of lift. It comes with innovative features such as a translucent tank for easy & fast inspection, vibration dampening feet & motor mounts, metal mounting tabs, four inlet holes (and 3 poly covers for the unused), LED indicators, float switch and duckbill-style check valve, and detailed installation instructions. Two 1/4in. quick connect terminals provide the installer fast and easy connections to the built-in overflow switch to shut-down the system and prevent flooding, an important safety feature. 20 ft of 3/8 in discharge tubing is included.
Asurity, ULTRACP-22T, Pump, Series: ULTRACP, 132 gph Flow Rate, 115 V Power, 1/2 gal Reservoir, 160 deg F, NEMA 5-15 Plug Enclosure, Red, 9 in H x 7.5 in W x 12.25 in D Dimensions
Welcome back.
Your orders, invoices, and account tools are ready when you are.
