Diablo's new Demo Demon carbide general purpose reciprocating blades are the first on the market specifically designed for both
wood and metal. These blades include exclusive features that deliver unmatched 50 times longer life in both wood and metal cutting
applications. With an oversized blade body, patented Variable tooth design, and Perma-Shield non-stick coating, this blade is ideal for
cutting nail embedded wood and demolition thick metal applications with a 1/8 inch to 3/8 inch thickness.
Features
Carbide tooth design for up to 50X cutting life in wood and metal applications
Patented variable tooth technology provides faster cuts with less vibration
Unique plunge tip design that enables faster and easier plunging in wood
Perma-SHIELD non stick coated for less gumming and friction
1 inch demolition body for straighter cuts with less vibration
Steel Demon carbide tipped 10 TPI medium metal cutting reciprocating blade delivers 50x longer cutting life and clean finish in strut, pipe,
stainless steel and all other metals ranging in 1/16 inch to 5/16 inch thickness.
Features
High performance carbide for greater durability and cutting performance in metals with a thickness from 1/16 inch to 5/16 inch
Enhanced carbide tip to blade connection for extreme impact resistance
1 inch oversized blade body for straighter cuts with less vibration
10 TPI tooth geometry for clean smooth finishes on medium metal applications
LENOX has defined performance in the reciprocating saw blade category since inventing the first bi-metal blade in 1977. LENOX has used
its century of cutting expertise to lead the way in reciprocating blade performance and is redefining performance levels in the bi-metal
reciprocating category with the introduction of Power Blast Technology. Power Blast Technology refers to a high speed blasting process known
as peening, which is applied to the tang and cutting edge of LENOX Bi-Metal Reciprocating Saw Blades to reduce breaks and increase
durability. The process is commonly used in the aerospace and automotive industries to strengthen steel and has been used in manufacturing
LENOX Band Saw blades for years. By blasting the cutting edge and tang of the blade, a layer of compressive stress is created on the surface
of the blade in the areas that receive the most abuse. This compressive stress reduces the formation of cracks which causes blade failure.
Features
For cutting plaster and drywall
Power-Blast high speed blasting along the cutting edge strengthens the blade to reduce breaks and increase durability
Patented T2 technology reduces cutting forces on each tooth and optimizes chip removal to allow efficient cutting in the widest range of materials
Patented metal cutting TPI's provide faster and more efficient cutting in the widest variety of materials, including Unistrut, angle iron, black
pipe and more
Diablo's universal fit bi-metal oscillating blades feature application specific designs that deliver maximum durability and longer life in
metal. These high performance blades feature an ultra hardened cutting edge to deliver up to 5X longer life than standard blades. An
optimized tooth design reduces vibration for fast and clean cuts. Black I.C.E. (Industrial Cooling Element) keeps the teeth cool and build up
free for fast, clean cuts. The blade's universal fit, adapter free design easily attaches most tools, with the exception of Starlock tools.
Features
Ultra hardened cutting edge for up to 5X longer life than standard blades
Curve contact edge for precise, clean plunge cuts with less vibration
Black I.C.E. coated teeth for heat resistance, long life and superior chip evacuation
2 inch cutting depth
Universal interface design fits most tools with no adapter needed
Maximum performance in cordless and corded oscillating multi-tools from Bosch, Craftsman, Dewalt, Dremel, Fein, Hart, Makita,
Milwaukee, Porter-Cable, Ridgid, Rockwell and more
Diablo's new Demo Demon Carbide pruning and fast clean wood blades feature an aggressive carbide tooth geometry for an unmatched 50
times longer cutting life, faster cuts and increased productivity in pruning and clean wood cutting applications. These industry first carbide blades
are designed with large gullets and a strengthened, oversized blade body for fast chip removal in extreme cutting applications. In addition, these
radical blades feature Perma-Shield non-stick coating to prevent gumming and friction for fast, effortless cuts in some of the toughest wood
cutting scenarios.
Features
Carbide tipped cutting edge for up to 50X cutting life versus standard pruning blades
Ultimate cutting performance in clean wood and pruning applications
Aggressive carbide tooth geometry delivers fast and effortless cuts
Large blade gullets between teeth provide fast chip removal
Strengthened, oversized blade body for extreme cutting applications
LENOX has defined performance in the reciprocating saw blade category since inventing the first bi-metal blade in 1977. LENOX has used
its century of cutting expertise to lead the way in reciprocating blade performance and is redefining performance levels in the bi-metal
reciprocating category with the introduction of Power Blast Technology. Power Blast Technology refers to a high speed blasting process known
as peening, which is applied to the tang and cutting edge of LENOX Bi-Metal Reciprocating Saw Blades to reduce breaks and increase
durability. The process is commonly used in the aerospace and automotive industries to strengthen steel and has been used in manufacturing
LENOX Band Saw blades for years. By blasting the cutting edge and tang of the blade, a layer of compressive stress is created on the surface
of the blade in the areas that receive the most abuse. This compressive stress reduces the formation of cracks which causes blade failure.
Features
For cutting thin to medium metal
Power-Blast high speed blasting along the cutting edge strengthens the blade to reduce breaks and increase durability
Patented T2 technology reduces cutting forces on each tooth and optimizes chip removal to allow efficient cutting in the widest range of materials
Patented metal cutting TPI's provide faster and more efficient cutting in the widest variety of materials, including Unistrut, angle iron, black
pipe and more
Diablo's Steel Demon Corner Edge flap discs feature a premium zirconium blend for up to 10X faster material removal when
compared to standard grinding wheels. The flap discs' special flap design offers flexibility and provides for a cushioned grinding effect.
Diablo's high performance flap discs combine two steps in one by simultaneously grinding and polishing .
Features
7/8 inch No Hub arbor - 4-1/2 inch diameter - 40 Ultra Coarse grit - Hub type 29 - 13,280 maximum RPM
Premium Zirconium Blend - a superior quality formulation designed for fast material removal and long sanding life
Corner Edge Design has a unique rounded edge for maximum performance and accessibilty to reach the most diffult grinding areas.
Delivers up to 10X faster material removal than a grinding wheel
Diablo's carbide teeth jig saw blades deliver extreme durability and superior cutting life in a wide range of materials such as wood,
metal and plastics. High performance carbide teeth provide an unmatched up to 50X longer cutting life versus standard jig saw blades. The
optimized blade design and Perma-SHIELD non-stick coating reduces heat and pitch build up for fast and effortless cuts. T-shank design
fits all combo and most U-shank cordless and corded jig saws.
Features
High performance carbide for greater durability and up to 50X longer life versus standard jig saw blades
Agressive carbide tooth geometry delivers fast and effortless cuts
Optimized blade design reduces heat and pitch build up
Enhanced carbide tip to blade connection for extreme impact resistance
Perma-SHIELD non-stick coating for less heat and friction
T-shank design fits all combo and most U-shank jig saws
Maximum performance in cordless and corded jig saws
Diablo's next generation reciprocating saw blades with Full Contact Arched Design are specifically designed for maximum performance in
metal cutting applications. The blade's Full Contact Arched Design with ultra hardened cutting edge provides faster cuts in fewer passes resulting
in less heat build up to deliver 5x longer cutting performance than those of standard blades.
Features
Full Contact Arched Design provides more working teeth within the material for faster cuts in fewer passes resulting in less heat build up to
deliver 5x longer cutting performance
Dual Tooth design features a double tooth configuration with small gullets for faster material removal and extra durability.
Perma-shield coating protects the blade from heat, gumming, and corrosion
1 inch Demolition body for straighter cuts with less vibration.
Diablo's new Demo Demon 7-3/8 inch x 5 TPI Rough-In/Scrolling Carbide reciprocating saw blades deliver an unmatched 50 times
longer cutting life, faster cuts and increased productivity in scrolling and radius cutting applications. These industry first carbide blades are
designed with large gullets and a strengthened blade body for fast chip removal and maximum stability in extreme cutting applications.
Diablo's new optimized tip design provides fast plunge capabilities, saving time and effort when engaging material. In addition, these
radical blades feature Perma-SHIELD non-stick coating to prevent gumming and friction for fast, effortless cuts in nail embedded wood and
clean wood.
Features
High-performance carbide cutting edge for greater durability and maximum cutting performance
Strengthened blade body for scrolling and radius cutting applications
Optimized blade height for tight scrolling
New tip design provides faster plunge capabilities
Aggressive carbide tooth geometry delivers fast and effortless cuts
Enhanced carbide tip to blade connection for extreme impact resistance
Unique plunge tip design enables faster and easier plunging
Large blade gullets between teeth provide fast chip removal
Perma-SHIELD resists heat build up by protecting the blade against gumming and corrosion
Diablo's new Demo Demon carbide general purpose reciprocating blades are the first on the market specifically designed for both
wood and metal. These blades include exclusive features that deliver unmatched 50 times longer life in both wood and metal cutting
applications. With an oversized blade body, patented Variable tooth design, and Perma-Shield non-stick coating, this blade is ideal for
cutting nail embedded wood and demolition thick metal applications with a 1/8 inch to 3/8 inch thickness.
Features
Carbide tooth design for up to 50X cutting life in wood and metal applications
Patented variable tooth technology provides faster cuts with less vibration
Unique plunge tip design that enables faster and easier plunging in wood
Perma-SHIELD non stick coated for less gumming and friction
1 inch demolition body for straighter cuts with less vibration
LENOX has defined performance in the reciprocating saw blade category since inventing the first bi-metal blade in 1977. LENOX has used
its century of cutting expertise to lead the way in reciprocating blade performance and is redefining performance levels in the bi-metal
reciprocating category with the introduction of Power Blast Technology.
Features
For cutting cast iron, tile, brick and natural stone
Double tang allows the user to flip the blade around, reducing waster grit and maximizing cost per cut
Diamond grit cutting edge and dual tangs provide longer life than standard carbide grit blades
Narrow kerf edge removes less material for faster cutting
Diablo's next generation reciprocating saw blades with Full Contact Arched Design are specifically designed for maximum performance in
metal cutting applications. The blade's Full Contact Arched Design with ultra hardened cutting edge provides faster cuts in fewer passes resulting
in less heat build up to deliver 5x longer cutting performance than those of standard blades.
Features
Full Contact Arched Design provides more working teeth within the material for faster cuts in fewer passes resulting in less heat build up to
deliver 5x longer cutting performance
Dual Tooth design features a double tooth configuration with small gullets for faster material removal and extra durability.
Perma-shield coating protects the blade from heat, gumming, and corrosion
1 inch Demolition body for straighter cuts with less vibration.
Diablo's new Demo Demon carbide general purpose reciprocating blades are the first on the market specifically designed for both
wood and metal. These blades include exclusive features that deliver unmatched 50 times longer life in both wood and metal cutting
applications. With an oversized blade body, patented Variable tooth design, and Perma-Shield non-stick coating, this blade is ideal for
cutting nail embedded wood and demolition thick metal applications with a 1/8 inch to 3/8 inch thickness.
Features
Carbide tooth design for up to 50X cutting life in wood and metal applications
Patented variable tooth technology provides faster cuts with less vibration
Unique plunge tip design that enables faster and easier plunging in wood
Perma-SHIELD non stick coated for less gumming and friction
1 inch demolition body for straighter cuts with less vibration
Diablo's new Demo Demon carbide general purpose reciprocating blades are the first on the market specifically designed for both
wood and metal. These blades include exclusive features that deliver unmatched 50 times longer life in both wood and metal cutting
applications. With an oversized blade body, patented Variable tooth design, and Perma-Shield non-stick coating, this blade is ideal for
cutting nail embedded wood and demolition thick metal applications with a 1/8 inch to 3/8 inch thickness.
Features
Carbide tooth design for up to 50X cutting life in wood and metal applications
Patented variable tooth technology provides faster cuts with less vibration
Unique plunge tip design that enables faster and easier plunging in wood
Perma-SHIELD non stick coated for less gumming and friction
1 inch demolition body for straighter cuts with less vibration
LENOX has defined performance in the reciprocating saw blade category since inventing the first bi-metal blade in 1977. LENOX has used
its century of cutting expertise to lead the way in reciprocating blade performance and is redefining performance levels in the bi-metal
reciprocating category with the introduction of Power Blast Technology. Power Blast Technology refers to a high speed blasting process known
as peening, which is applied to the tang and cutting edge of LENOX Bi-Metal Reciprocating Saw Blades to reduce breaks and increase
durability. The process is commonly used in the aerospace and automotive industries to strengthen steel and has been used in manufacturing
LENOX Band Saw blades for years. By blasting the cutting edge and tang of the blade, a layer of compressive stress is created on the surface
of the blade in the areas that receive the most abuse. This compressive stress reduces the formation of cracks which causes blade failure.
Features
For cutting thin metal
Power-Blast high speed blasting along the cutting edge strengthens the blade to reduce breaks and increase durability
Patented T2 technology reduces cutting forces on each tooth and optimizes chip removal to allow efficient cutting in the widest range of materials
Patented metal cutting TPI's provide faster and more efficient cutting in the widest variety of materials, including Unistrut, angle iron, black
pipe and more
Steel Demon carbide tipped 10 TPI medium metal cutting reciprocating blade delivers 50x longer cutting life and clean finish in strut, pipe,
stainless steel and all other metals ranging in 1/16 inch to 5/16 inch thickness.
Features
High performance carbide for greater durability and cutting performance in metals with a thickness from 1/16 inch to 5/16 inch
Enhanced carbide tip to blade connection for extreme impact resistance
1 inch oversized blade body for straighter cuts with less vibration
10 TPI tooth geometry for clean smooth finishes on medium metal applications
The Diablo Steel Demon Carbide tipped reciprocating blades are the first carbide tipped blades designed for extreme metal cutting; including
high strength alloys, cast iron, and stainless steel. This high performance carbide tipped blade delivers unmatched 50 times longer cutting life
than standard bi-metal blades in extreme thick metal cutting applications from 3/16 inch to 9/16 inch.
Features
High performance carbide for greater durability and cutting performance in metals with a thickness from 3/16 inch to 9/16 inch
Enhanced carbide tip to blade connection for extreme impact resistance
1 inch oversized blade body for straighter cuts with less vibration
Perma-SHIELD non-stick coating for less heat and friction
LENOX has defined performance in the reciprocating saw blade category since inventing the first bi-metal blade in 1977. LENOX has used
its century of cutting expertise to lead the way in reciprocating blade performance and is redefining performance levels in the bi-metal
reciprocating category with the introduction of Power Blast Technology. Power Blast Technology refers to a high speed blasting process known
as peening, which is applied to the tang and cutting edge of LENOX Bi-Metal Reciprocating Saw Blades to reduce breaks and increase
durability. The process is commonly used in the aerospace and automotive industries to strengthen steel and has been used in manufacturing
LENOX Band Saw blades for years. By blasting the cutting edge and tang of the blade, a layer of compressive stress is created on the surface
of the blade in the areas that receive the most abuse. This compressive stress reduces the formation of cracks which causes blade failure.
Features
For cutting clean wood and nail embedded wood
Power-Blast high speed blasting along the cutting edge strengthens the blade to reduce breaks and increase durability
Patented T2 technology reduces cutting forces on each tooth and optimizes chip removal to allow efficient cutting in the widest range of materials
Patented design for ultimate durability and speed when cutting clean wood or nail embedded wood
The Diablo Steel Demon Carbide tipped reciprocating blades are the first carbide tipped blades designed for extreme metal cutting; including
high strength alloys, cast iron, and stainless steel. This high performance carbide tipped blade delivers unmatched 50 times longer cutting life
than standard bi-metal blades in extreme thick metal cutting applications from 3/16 inch to 9/16 inch.
Features
High performance carbide for greater durability and cutting performance in metals with a thickness from 3/16 inch to 9/16 inch
Enhanced carbide tip to blade connection for extreme impact resistance
1 inch oversized blade body for straighter cuts with less vibration
Perma-SHIELD non-stick coating for less heat and friction
LENOX has defined performance in the reciprocating saw blade category since inventing the first bi-metal blade in 1977. LENOX has used
its century of cutting expertise to lead the way in reciprocating blade performance and is redefining performance levels in the bi-metal
reciprocating category with the introduction of Power Blast Technology. Power Blast Technology refers to a high speed blasting process known
as peening, which is applied to the tang and cutting edge of LENOX Bi-Metal Reciprocating Saw Blades to reduce breaks and increase
durability. The process is commonly used in the aerospace and automotive industries to strengthen steel and has been used in manufacturing
LENOX Band Saw blades for years. By blasting the cutting edge and tang of the blade, a layer of compressive stress is created on the surface
of the blade in the areas that receive the most abuse. This compressive stress reduces the formation of cracks which causes blade failure.
Features
For cutting cast iron, tile, brick and natural stone
Nickel alloy brazed diamond particles maintain sharpness to keep cutting after conventional carbide grit fails
A narrow kerf design enables thinner, faster cuts
Unlike bulky snap cutters which can crush pipes and leave ragged, uneven cuts, LENOX Diamond cuts cleanly
Double chrome alloy backing steel provides extra stability
The Diablo Steel Demon Carbide tipped reciprocating blades are the first carbide tipped blades designed for extreme metal cutting; including
high strength alloys, cast iron, and stainless steel. This high performance carbide tipped blade delivers unmatched 50 times longer cutting life
than standard bi-metal blades in extreme thick metal cutting applications from 3/16 inch to 9/16 inch.
Features
High performance carbide for greater durability and cutting performance in metals with a thickness from 3/16 inch to 9/16 inch
Enhanced carbide tip to blade connection for extreme impact resistance
1 inch oversized blade body for straighter cuts with less vibration
Perma-SHIELD non-stick coating for less heat and friction
Steel Demon carbide tipped 10 TPI medium metal cutting reciprocating blade delivers 50x longer cutting life and clean finish in strut, pipe,
stainless steel and all other metals ranging in 1/16 inch to 5/16 inch thickness.
Features
High performance carbide for greater durability and cutting performance in metals with a thickness from 1/16 inch to 5/16 inch
Enhanced carbide tip to blade connection for extreme impact resistance
1 inch oversized blade body for straighter cuts with less vibration
10 TPI tooth geometry for clean smooth finishes on medium metal applications
The Next Generation Diablo Demo Demon Carbide tipped reciprocating blades with new Variable Tooth Design are specifically
designed for maximum performance in nail embedded wood. This high performance carbide tipped blade delivers unmatched 50 times
longer cutting life than bi-metal blades in nail embedded wood.
Features
New Variable Tooth Design provides faster cuts with less vibration in nail embedded wood
High performance carbide for greater durability and cutting performance
Enhanced carbide tip to blade connection for extreme impact resistance
Unique plunge tip design that enables faster and easier plunging
1 inch oversized blade body for straighter cuts with less vibration
LENOX has defined performance in the reciprocating saw blade category since inventing the first bi-metal blade in 1977. LENOX has used
its century of cutting expertise to lead the way in reciprocating blade performance and is redefining performance levels in the bi-metal
reciprocating category with the introduction of Power Blast Technology. Power Blast Technology refers to a high speed blasting process known
as peening, which is applied to the tang and cutting edge of LENOX Bi-Metal Reciprocating Saw Blades to reduce breaks and increase
durability. The process is commonly used in the aerospace and automotive industries to strengthen steel and has been used in manufacturing
LENOX Band Saw blades for years. By blasting the cutting edge and tang of the blade, a layer of compressive stress is created on the surface
of the blade in the areas that receive the most abuse. This compressive stress reduces the formation of cracks which causes blade failure.
Features
For cutting thin to medium metal
Power-Blast high speed blasting along the cutting edge strengthens the blade to reduce breaks and increase durability
Patented T2 technology reduces cutting forces on each tooth and optimizes chip removal to allow efficient cutting in the widest range of materials
Patented metal cutting TPI's provide faster and more efficient cutting in the widest variety of materials, including Unistrut, angle iron, black
pipe and more
Steel Demon carbide tipped 10 TPI medium metal cutting reciprocating blade delivers 50x longer cutting life and clean finish in strut, pipe,
stainless steel and all other metals ranging in 1/16 inch to 5/16 inch thickness.
Features
High performance carbide for greater durability and cutting performance in metals with a thickness from 1/16 inch to 5/16 inch
Enhanced carbide tip to blade connection for extreme impact resistance
1 inch oversized blade body for straighter cuts with less vibration
10 TPI tooth geometry for clean smooth finishes on medium metal applications
The Next Generation Diablo Demo Demon Carbide tipped reciprocating blades with new Variable Tooth Design are specifically
designed for maximum performance in nail embedded wood. This high performance carbide tipped blade delivers unmatched 50 times
longer cutting life than bi-metal blades in nail embedded wood.
Features
New Variable Tooth Design provides faster cuts with less vibration in nail embedded wood
High performance carbide for greater durability and cutting performance
Enhanced carbide tip to blade connection for extreme impact resistance
Unique plunge tip design that enables faster and easier plunging
1 inch oversized blade body for straighter cuts with less vibration
LENOX has defined performance in the reciprocating saw blade category since inventing the first bi-metal blade in 1977. LENOX has used
its century of cutting expertise to lead the way in reciprocating blade performance and is redefining performance levels in the bi-metal
reciprocating category with the introduction of Power Blast Technology. An aggressive blade design optimizes the blade's angle of attack for faster
cutting in a variety of materials. LENOX T2 Technology and precision applied titanium nitride coating helps dissipate heat, extending the life of the
blades.
Features
For cutting thick metal or wood
Power Arc curved blade delivers 2X longer life versus traditional straight LENOX reciprocating blades
Aggressive blade design optimizes the blades angle of attack for faster cutting in a variety of materials
Patented T2 technology and precision applied titanium nitride coating help dissipate heat, making the blades last longer
Titanium nitride coating makes teeth more wear resistant so they stay sharp for quicker cuts
Diablo's reciprocating Saw Blades are specifically designed for maximum performance in general purpose (nail-embedded wood and metal)
applications. These high performance blades feature bi-metal technology that delivers up to five times longer life of standard Blades on the market.
Diablo's's patented variable tooth technology provides faster cuts with less vibration.
Features
Perma-shield coating protects the blade from heat, gumming, and corrosion
1 in. Demolition body for straighter cuts with less vibration
Ultra hardened cutting edge for up to five times longer life than standard blades
A one of a kind tip design that enables faster and easier plunging
Diablo's premium metal cut off discs provide superior performance and increased productivity. Featuring a premium aluminum oxide
blend, these discs cut through material faster than other cut off discs and offer an extra long cutting life. Fully reinforced for use in hand held
cut off work. Ideal for use when working in hard to reach areas.
Features
7/8 inch arbor - 4-1/2 inch diameter - Hub type 1 - .04 inch thick - 13,280 maximum RPM
Premium Aluminum Oxide Blend - a superior quality formulation designed for fast material removal and long cutting life
For use on metal applications: steel, stainless, cast iron, sheet metal
LENOX has defined performance in the reciprocating saw blade category since inventing the first bi-metal blade in 1977. LENOX has used
its century of cutting expertise to lead the way in reciprocating blade performance and is redefining performance levels in the bi-metal
reciprocating category with the introduction of Power Blast Technology. Power Blast Technology refers to a high speed blasting process known
as peening, which is applied to the tang and cutting edge of LENOX Bi-Metal Reciprocating Saw Blades to reduce breaks and increase
durability. The process is commonly used in the aerospace and automotive industries to strengthen steel and has been used in manufacturing
LENOX Band Saw blades for years. By blasting the cutting edge and tang of the blade, a layer of compressive stress is created on the surface
of the blade in the areas that receive the most abuse. This compressive stress reduces the formation of cracks which causes blade failure.
Features
For cutting medium to heavy metal
Power-Blast high speed blasting along the cutting edge strengthens the blade to reduce breaks and increase durability
Patented T2 technology reduces cutting forces on each tooth and optimizes chip removal to allow efficient cutting in the widest range of materials
Patented metal cutting TPI's provide faster and more efficient cutting in the widest variety of materials, including Unistrut, angle iron, black
pipe and more
Diablo's reciprocating saw blades are specifically designed for maximum performance in nail-embedded wood applications. These high
performance blades feature bi-metal technology that delivers up to five times longer life of standard blades on the market. Diablo's's patented
variable tooth technology provides faster cuts with less vibration.
Features
Perma-shield coating protects the blade from heat, gumming, and corrosion
1 in. Demolition body for straighter cuts with less vibration
Ultra hardened cutting edge for up to five times longer life than standard blades
A one of a kind tip design that enables faster and easier plunging
The latest addition to Diablo's Steel Demon Carbide reciprocating blade family is the industry's first carbide teeth blade for thin metal
conduit and tubing. A proprietary high performance carbide formulation extends the cutting life up to 50 times longer, making this the most
efficient cutting solution in thin metal conduit and tubing applications. The blade's optimized tooth count effortlessly rips through thin metals with
ease, producing clean cuts that require virtually no rework. A one inch blade body height provides the rigidity and stability needed for straight
cuts with less vibration.
Features
High performance carbide for greater durability and up to 50X cutting performance in thin metal conduit and tubing
Optimized 12 TPI tooth geometry cuts out rework by producing clean, smooth cuts
Enhanced carbide to blade connection for extreme impact resistance
1 inch oversized blade body provides stability and rigidity required for straighter cuts with less vibration
Perma-SHIELD resists heat build-up by protecting the blade against gumming and corrosion
Diablo's new Demo Demon carbide general purpose reciprocating blades are the first on the market specifically designed for both
wood and metal. These blades include exclusive features that deliver unmatched 50 times longer life in both wood and metal cutting
applications. With an oversized blade body, patented Variable tooth design, and Perma-Shield non-stick coating, this blade is ideal for
cutting nail embedded wood and demolition thick metal applications with a 1/8 inch to 3/8 inch thickness.
Features
Carbide tooth design for up to 50X cutting life in wood and metal applications
Patented variable tooth technology provides faster cuts with less vibration
Unique plunge tip design that enables faster and easier plunging in wood
Perma-SHIELD non stick coated for less gumming and friction
1 inch demolition body for straighter cuts with less vibration
Diablo's diamond segmented masonry cut off discs provide extreme durability and longer life in concrete, concrete with rebar, brick and
cinder block. These diamond rimmed discs deliver up to 2X longer cutting life versus standard diamond cut off discs. The disc's industrial
grade diamonds with hardened disc body delivers lasting durability and maximizes cutting quality in hardened materials even in extreme
applications.
Features
7/8 inch arbor with 5/8 inch and 20mm arbor bushings - 4-1/2 inch diameter - 2.2mm kerf - Segmented rim design - 13,280 maximum
RPM
Taller segments containing superior quality diamonds along with an ultra durable bond to the disc body for up to 2X longer life
Hardened disc body absorbs vibration and increases impact resistance to deliver superior quality cuts in hardened materials
Optimized diamond segments and diamond distribution lead to constant diamond exposure for maximum performance in high speed
cutting applications
Compatible with 7/8 inch arbor - Includes bushings for 20mm arbor and 5/8 inch arbor
Diamond metal cut off wheels deliver extreme durability, minimal downtime and increased productivity. These diamond rimmed wheels
deliver 100X longer cutting life versus a standard bonded cut off disc in some of the most intense metal cutting situations. The wheel's long
lasting durability maximizes cutting even in extreme applications such as rebar, angle iron, cast iron and steel bar. Diablo's diamond metal
cut off wheels not only provide long lasting cutting life, durability and control, but they also allow for a safer cutting experience.
Features
7/8 inch arbor - 4-1/2 inch diameter - Hub type 1 - Segmented rim design - 13,280 maximum RPM
Diamond rimmed wheels deliver up to 100X longer cutting life and durability when compared to one standard bonded cut off disc
Advanced Electro-Plating Process for even distribution of diamond abrasive cutting edge
Maintains cutting diameter for consistent cutting results
Diamond technology is safer to use versus bonded discs by providing more control, less sparks and less dust
Diamond wheels do not shatter or break when dropped
Diablo's reciprocating Saw Blades are specifically designed for maximum performance in metal cutting applications. The blade's ultra
hardened cutting edge delivers up to five times longer life than those of standard Blades. Dual Tooth design features a double tooth configuration
with small gullets for faster material removal and extra durability.
Features
Perma-shield coating protects the blade from heat, gumming, and corrosion
1 inch Demolition body for straighter cuts with less vibration
Ultra hardened edge increases the hardness of the cutting edge to a rockwell hardness of HRC 62 versus HRC 55 for standard blades
A one of a kind tip design that enables faster and easier plunging
The Diablo Steel Demon Carbide tipped reciprocating blades are the first carbide tipped blades designed for extreme metal cutting; including
high strength alloys, cast iron, and stainless steel. This high performance carbide tipped blade delivers unmatched 50 times longer cutting life
than standard bi-metal blades in extreme thick metal cutting applications from 3/16 inch to 9/16 inch.
Features
High performance carbide for greater durability and cutting performance in metals with a thickness from 3/16 inch to 9/16 inch
Enhanced carbide tip to blade connection for extreme impact resistance
1 inch oversized blade body for straighter cuts with less vibration
Perma-SHIELD non-stick coating for less heat and friction
Diablo's Starlock oscillating sanding blades feature application specific designs that deliver maximum durability and longer life in grout,
mortar and tile adhesive removal applications. The 40 Grit sanding plate removes material and routes joints on wall and floor tiles. A
Carbide Grit Tip removes grout and mortar from hard to reach areas and tight corners. Tool free quick change interface fits Fein and other
Starlock tools
Features
Carbide grit tip reaches hard to access areas and tight corners
3 in 1 40 grit sanding plate for removal of grout, mortar and tile adhesive
Maximum performance in cordless and corded oscillating multi-tools from Fein and other Starlock tools, as well as AEG, Bosch,
Festool, Makita, Metabo, Milwaukee, Ridgid, and Rockwell
Not compatible with Craftsman, Dewalt, Dremel, Hart or Porter Cable tools
Diamond metal cut off wheels deliver extreme durability, minimal downtime and increased productivity. These diamond rimmed
wheels deliver 100X longer cutting life versus a standard bonded cut off disc in some of the most intense metal cutting situations. The
wheel's long lasting durability maximizes cutting even in extreme applications such as rebar, angle iron, cast iron and steel bar. Diablo's
diamond metal cut off wheels not only provide long lasting cutting life, durability and control, but they also allow for a safer cutting
experience.
Features
7/8 inch arbor - 5 inch diameter - Hub type 1 - Segmented rim design - 12,200 maximum RPM
Diamond rimmed wheels deliver up to 100X longer cutting life and durability when compared to one standard bonded cut off disc
Advanced Electro-Plating Process for even distribution of diamond abrasive cutting edge
Maintains cutting diameter for consistent cutting results
Diamond technology is safer to use versus bonded discs by providing more control, less sparks and less dust
Diamond wheels do not shatter or break when dropped
Diablo's 5 piece universal fit oscillating blade set features application specific blades ranging from nail embedded wood, clean wood,
metal, plastics and drywall. Included are high performance carbide and bi-metal blades sure to deliver unmatched durability, life and quality
of cut in any job. The blade's universal fit, adapter free design easily attaches to most tools, but will not fit Starlock tools.
Features
High performance carbide and bi-metal blades for greater durability and cutting performance
Universal interface design fits most tools, no adapters needed
Maximum performance in cordless and corded oscillating multi-tools from Bosch, Craftsman, Dewalt, Dremel, Fein, Hart, Makita,
Milwaukee, Porter-Cable, Ridgid, Rockwell and more
Not compatible with Starlock tools
What's Included
(1) - 1-1/4 inch universal fit bi-metal oscillating blade for nail embedded wood (DOU125BW)
(1) - 1-1/4 inch universal fit carbide oscillating blade for metal (DOU125CF)
(1) - 1-1/4 inch universal fit carbide oscillating blade for general purpose cutting (DOU125CGP)
(1) - 1-1/4 inch universal fit bi-metal oscillating blade for clean wood (DOU125JBW)
(1) - 2 inch universal fit bi-metal oscillating blade for drywall (DOU200RBD)
Diablo's universal fit carbide oscillating blades feature application specific designs that deliver extreme durability and superior cutting
life in general purpose cuts: nail embedded wood, clean wood, metal and plastics. High performance carbide teeth deliver an unmatched
up to 50X longer cutting life versus standard bi-metal blades. Curve contact edge creates a pilot for precise, clean plunge cuts with less
vibration. An optimized blade design and Black I.C.E. (Industrial Cooling Element) keeps the teeth cool and build up free for fast, clean cuts.
The blade's universal fit, adapter-free design easily attaches to most tools, with the exception of Starlock tools.
Features
High perfomance carbide for greater durability and up to 50X longer life versus standard bi-metal blades
Curve contact edge for precise, clean plunge cuts with less vibration
Black I.C.E. coated teeth for heat resistance, long life and superior chip evacuation
1 inch cutting depth
Universal interface design fits most tools with no adapter needed
Maximum performance in cordless and corded oscillating multi-tools from Bosch, Craftsman, Dewalt, Dremel, Fein, Hart, Makita,
Milwaukee, Porter-Cable, Ridgid, Rockwell and more
Not compatible with Starlock tools
Welcome back.
Your orders, invoices, and account tools are ready when you are.
