Two boxes separate supply and drain into 2 stud bays - Boxes mount securely to stud or over stud - Easy to remove drain knockout - Includes 2 MiniRester water hammer arresters - Debris cover protects valves - Quarter turn ball valves with hose connections
Washing Machine Valves 20
Box dimensions: 8-3/4 inches wide x 7-1/2 inches tall x 3-5/8 inches deep - Faceplate dimensions: 11-3/4 inches wide x 10-1/8 inches tall - Top or bottom valve mounting - Includes 4 support brackets - Faceplate will accomodte up to 1 inch thick drywall - Single lever valve - 2 inch drain opening can be on the right or left side of the box
This 1/2 inch manual washing machine shutoff valve is designed to control water flow from the water supply to the flexible hoses feeding to a washing machine. This single Duo-Cloz lever to turn both hot and cold water on or off quickly and can eliminate water pressure on supply hoses to prevent catastrophic water damage. This shutoff valve has a brass body construction, brass ball valves with long wearing Teflon seats, 1/2 inch dual copper straight adapters for 1/2 inch male NPT or 1/2 inch solder end connections to receive tubing and 3/4 inch hose connections. The maximum pressure is 150 psi and the maximum temperature is 180 degree F.
Box dimensions: 8-3/4 inches wide x 7-1/2 inches tall x 3-5/8 inches deep - Faceplate dimensions: 11-3/4 inches wide x 10-1/8 inches tall - Top or bottom valve mounting - Includes 4 support brackets - Faceplate will accomodte up to 1 inch thick drywall - Single lever valve - 2 inch drain opening can be on the right or left side of the box
Separate boxes for supply and drain allowing 2 stud bay installation or the boxes can be snapped together - Assembled box dimensions 14.13 inches wide x 4.85 inches tall x 3.375 inches deep - Faceplate dimensions: 6 inches wide x 6.45 inches tall - Includes water hammer arresters - Bottom valve mounting - Includes support brackets - Faceplate will accomodate up to 1 inch thick drywall - Separate hot and cold valves - 2 inch drain opening is in the second box
Sioux Chief 696 series OxBox™ double hose bib outlet connection outlet box with drain box shall be used where necessary in plumbing supply/drainage systems. Unit shall allow for mounting with supply lines from top or bottom, on-stud or between-studs. Unit shall be available with plain valves or valves with water hammer arresters. Arresters shall be certified to ASSE 1010 and shall be UPC listed. Metal support bracket shall install into top tracks of boxes for between stud configuration. Metal clip shall be installed on side slots of box in desired configuration. Drain box shall have a 5/8 in integral testable nipple on knockout. Outlet connections shall be generally 3/4 in.
Sioux Chief OxBox™ Outlet Box, Series: 696, 1/2 in Inlet, 3/4 in Outlet, PEX F1960 Inlet, Male Hose Thread Outlet, 250 psig, 250 deg F, ABS, 11-1/2 in W x 7-1/4 in H
Overview
The A2C-SC IntelliFlow(R) washing machine smart water shutoff senses your washing machine's current flow and immediately shuts off the water supply if an inlet hose bursts. Simply scan the QR code on your IntelliFlow, follow the prompts to register it online, and connect it to your local WiFi network to enable real-time text and email alerts. The IntelliFlow valve only allows water to flow into the washing machine when electric current indicates the machine is in use, and automatically closes water inlet valves when a water leak is detected. Maximum pressure setting is 150 psi and maximum washing machine current rating is 15A. A burst washing machine hose can discharge 500 gallons of water in one hour, causing catastrophic damage to customer homes and businesses. Help protect your customers and install peace of mind with IntelliFlow.
Features
- Floor-mounted water leak sensor that automatically shuts off water supply to washer
- Automated flood detection with real-time text and email alerts
- Continuously monitors for the presence of water behind a washing machine
- Optional A-2 IntelliTimer allows use with 220 VAC powered washing machine or combination washer/dryer
Separate boxes for supply and drain allowing 2 stud bay installation or the boxes can be snapped together - Assembled box dimensions 14.13 inches wide x 4.85 inches tall x 3.375 inches deep - Faceplate dimensions: 6 inches wide x 6.45 inches tall - Bottom valve mounting - Includes support brackets - Faceplate will accomodate up to 1 inch thick drywall - Separate hot and cold valves - 2 inch drain opening is in the second box
Two boxes separate supply and drain into 2 stud bays - Boxes mount securely to stud or over stud - Easy to remove drain knockout - Includes 2 MiniRester water hammer arresters - Debris cover protects valves - Quarter turn ball valves with hose connections
Separate boxes for supply and drain allowing 2 stud bay installation or the boxes can be snapped together - Assembled box dimensions 14.13 inches wide x 4.85 inches tall x 3.375 inches deep - Faceplate dimensions: 6 inches wide x 6.45 inches tall - Bottom valve mounting - Includes support brackets - Faceplate will accomodate up to 1 inch thick drywall - Separate hot and cold valves - 2 inch drain opening is in the second box
This IntelliFlow automatic washing machine shutoff valve with leak sensor is used in residential applications to protect against catastrophic water damage from a burst inlet hose connected to a washing machine in use or unattended. It senses when the washing machine is on or off, and then opens or closes the hot and cold inlet valves as needed to allow or prevent water from flowing to the washer. If it detects a leak, current flow to both the hot and cold water valves are immediately interrupted and closed. This device consists of an electrical three-prong outlet to receive a washing machine power cable, leak sensor, power cord, and a replaceable internal strainer screen. It also comes equipped with 1/2 inch sweat inlet adapters for both hot and cold water supply tubing, a wall mounting box, and two mounting tabs used to secure the valve to the wall for surface mount applications. The maximum pressure is 150 psi.
For 1 to 11 fixtures - 5 cubic inch volume - 250 degrees maximum working temperature - 350 PSIG maximum working pressure - Can be installed at any angle
IPS's patented one piece design speeds installation vs seperate drain and valve boxes - Depth of the box rest against the back sheetrock wall for sturdy installation - Side of the box has a flat side for secure mounting to wall - The frame is interchangeable with center drain washing machine outlet boxes
Two boxes separate supply and drain into 2 stud bays - Boxes mount securely to stud or over stud - Easy to remove drain knockout - Includes 2 MiniRester water hammer arresters - Debris cover protects valves - Supply lines can be mounted from above or below - Quarter turn ball valves with hose connections
Two boxes separate supply and drain into 2 stud bays - Boxes mount securely to stud or over stud - Easy to remove drain knockout - Quarter turn ball valves with hose connections - Supply lines can be mounted from above or below
The Laundry-Mate control valve has a unique triple-seal packing and features self-adjusting, spring-loaded, non- wearing action. By eliminating constant water pressure shock, Laundry-Mate extends the life of your washing machine hoses. Laundry-Mate installs easily between 2 x 4 in studs on 16 in centers with angle mounting straps (furnished). Copper tubing supplies enter the sides of the unit from above or below and attach to union elbows. Just connect the valve to the union elbows with two screws, install the drain pipe and hoses and screw on the cover - your work is done.
Symmons® No Lead Washing Machine Valve, Automatic, Series: Laundry-Mate®, 1/2 in Nominal, C, 100 psi, 250 deg F, Brass Body, 4.78 in L x 4.75 in W x 1.9 in H
This 1/2 inch manual washing machine shutoff valve is designed to control water flow from the water supply to the flexible hoses connected to a washing machine. It has a single Duo-Cloz lever to turn both hot and cold water on or off quickly and can eliminate water pressure on supply hoses to prevent catastrophic water damage. This shutoff valve has a brass body construction, brass ball valves with long wearing Teflon seats, 1/2 inch copper dual ell adapters for solder or compression connections to receive tubing and 3/4 inch hose connections. The maximum pressure is 150 psi and the maximum temperature is 180 degree F.
Two boxes separate supply and drain into 2 stud bays - Boxes mount securely to stud or over stud - Easy to remove drain knockout - Debris cover protects valves - Supply lines can be mounted from above or below - Quarter turn ball valves with hose connections