This 1/2 inch manual washing machine shutoff valve is designed to control water flow from the water supply to the flexible hoses connected to a washing
machine. It has a single Duo-Cloz lever to turn both hot and cold water on or off quickly and can eliminate water pressure on supply hoses to prevent
catastrophic water damage. This shutoff valve has a brass body construction, brass ball valves with long wearing Teflon seats, 1/2 inch copper dual ell
adapters for solder or compression connections to receive tubing and 3/4 inch hose connections. The maximum pressure is 150 psi and the maximum
temperature is 180 degree F.
This 1/2 inch manual washing machine shutoff valve is designed to control water flow from the water supply to the flexible hoses feeding to a washing
machine. This single Duo-Cloz lever to turn both hot and cold water on or off quickly and can eliminate water pressure on supply hoses to prevent catastrophic
water damage. This shutoff valve has a brass body construction, brass ball valves with long wearing Teflon seats, 1/2 inch dual copper straight adapters for
1/2 inch male NPT or 1/2 inch solder end connections to receive tubing and 3/4 inch hose connections. The maximum pressure is 150 psi and the maximum
temperature is 180 degree F.
The A2C-SC IntelliFlow(R) washing machine smart water shutoff senses your washing machine's current flow and immediately shuts off the water supply if an inlet hose bursts. Simply scan the QR code on your IntelliFlow, follow the prompts to register it online, and connect it to your local WiFi network to enable real-time text and email alerts. The IntelliFlow valve only allows water to flow into the washing machine when electric current indicates the machine is in use, and automatically closes water inlet valves when a water leak is detected. Maximum pressure setting is 150 psi and maximum washing machine current rating is 15A. A burst washing machine hose can discharge 500 gallons of water in one hour, causing catastrophic damage to customer homes and businesses. Help protect your customers and install peace of mind with IntelliFlow.
Features
Floor-mounted water leak sensor that automatically shuts off water supply to washer
Automated flood detection with real-time text and email alerts
Continuously monitors for the presence of water behind a washing machine
Optional A-2 IntelliTimer allows use with 220 VAC powered washing machine or combination washer/dryer
This IntelliFlow automatic washing machine shutoff valve with leak sensor is used in residential applications to protect against catastrophic water damage
from a burst inlet hose connected to a washing machine in use or unattended. It senses when the washing machine is on or off, and then opens or closes
the hot and cold inlet valves as needed to allow or prevent water from flowing to the washer. If it detects a leak, current flow to both the hot and cold water
valves are immediately interrupted and closed. This device consists of an electrical three-prong outlet to receive a washing machine power cable, leak
sensor, power cord, and a replaceable internal strainer screen. It also comes equipped with 1/2 inch sweat inlet adapters for both hot and cold water
supply tubing, a wall mounting box, and two mounting tabs used to secure the valve to the wall for surface mount applications. The maximum pressure
is 150 psi.
This 1/2 inch lead free water hammer arrestor provides economical and effective single fixture protection used in residential or domestic water applications such as dishwashers, washing machines, and quick closing faucets. It is designed to control the water pressure shock and prevent water hammer conditions that are damaging to pipes and appliances. It consists of a stainless steel top and lower chamber, sealed-in diaphragm which flexes to absorb the shock, and a lead free brass hex adapter for easy installation. This may be installed in new or existing plumbing systems vertically, horizontally or at any angle and should be installed as close to the shock source as possible, with one unit for each hot and cold water line up to 150 psi (10.6 bar) working pressure. It is factory air charged at 30 psi (207 kPa) and is easily rechargeable with a standard tire valve connection and air-tight sealing cap.
WATTS® Water Hammer Arrester, Series: LF150, 1/2 in Nominal, NPT, 150 psi, 180 deg F
